Polpriklopnik z nizko nakladalno ploščadjo

FAYMONVILLE Doppeltele, MAX Trailer MAX110 Semi-Tieflader

Our complete stock of vehicles, including immediately and short-term available vehicles, can be found on our website.

Excerpt from the equipment. Full equipment list available upon request.

Gooseneck:
* Gooseneck with beveled front corners approx. 45° and rear bevel approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN). Hardwood floor covering approx. 30 mm thick

Loading Platform:
* Loading platform with double extension and rear bevel approx. 500 mm x 8°
* 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN)
* 4 pairs of fold-out lashing rings to the outside (LC 10,000 daN)
* 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN)
* 1 intermediate table approx. 250 mm
* Cutouts in the outer frame of the platform for attaching tensioning straps (LC 2,000 daN)
* Hardwood floor covering approx. 48 mm thick, checker plate over axles

Axles:
* BPW axles and suspension
* All axles hydro-mechanically forced-steered
* Technical axle load: 12,000 kg each
* Air suspension with lifting and lowering valve

Tyres:
* 245/70 R 17.5 3PMSF, load index (146/146 F)

Dcedpjwvzhbofx Adhen
Landing Legs:
* JOST landing legs (mechanical), two-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load)

Braking System:
* Braking system according to EU regulations with EBS-E (2S2M)

Paintwork:
* Superior and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc dust primer
* High-quality single-colour two-component (2K) topcoat in RAL 3002 carmine red
* Rear section metallized and painted in RAL 9010 pure white

Steel Construction:
* Steel structure made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa)

Including the following additional equipment:
* 2" kingpin
* One galvanized steel front wall, approx. 400 mm high
* Yellow-red air couplings on the galvanized terminal strip at the front
* 4 wheel chocks with holders on the front wall
* Spare wheel holder in front of the front wall
* Electro-hydraulic unit
* Remote-steering front and rear via cable remote control with pushbuttons, with axle single-track monitoring (without installation in the tractor unit)
* Recess at the rear of the gooseneck for aluminum drive-on ramps
* European reflective signs (red-yellow) at the rear of the trailer
* Yellow reflective tape as per EU regulations on the sides, on the extension, and at the rear of the trailer
* Bracket for warning plates with socket on the gooseneck and on the rear panel left and right
* Bracket for a rotating beacon at the rear of the trailer
* Galvanized folding supports under the rear slope of the loading platform
* Mud flap at the rear of the trailer
* User manual and documentation on USB stick
* 80 km/h speed sticker on the rear and on both sides
* Load pressure gauge for determining axle loads including load chart
* On the gooseneck, aluminum side and rear boards, plug-in, approx. 2,440 x 400 mm (L x H). The rear galvanized stake pockets are removable (body length approx. 2,560 mm)
* Galvanized toolbox integrated in the beveled gooseneck
* 4 pairs of WADER container pockets in the platform for one 20', 2x 20', 40', or one 45' container
* 8 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading platform
* Galvanized extendable widenings by approx. 230 mm per side
* Movable hanging rails for aluminum drive-on ramps at the rear of the

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.