Stroj za upogibanje z vrtljivim kolesom

Fasti 213 - 2040 x 10mm

Leto izdelave: 1990, stanje: pripravljen za uporabo (rabljen), Control: Deckel Dialog 11, equipped with a vise, inspection is possible. Fgsdpfx Aboqi D S Ujtsc

Stanje: novo, - Capacity: 700 x 2 mm - Conical rolling - Removable upper roll - Foot control - Emergency stop - Documentation Fgjdpfxsihv Hpj Abtsc - 400V

Stanje: dober (rabljeno), Hauteur de pointe : 290 mm Distance entre pointes : 3000 mm Ø de rotation au-dessus du banc : 580 mm Ø de rotation au-dessus du chariot transversal : env. 400 mm Alésage de la broche : 63 mm Nez de broche DIN 55027 : taille 8 Plage de vitesses : 25 – 1120 tr/min Largeur du banc : 365 mm Avance longitudinale : 0,03 – 1,3 mm/tr Idem, en transversal : 0,008 – 0,33 mm/tr 80 filetages métriques : 0,25 – 76 mm 96 filetages Whitworth : ½" – 152 filets/pouce 52 filetages module : 0,25 – 22 module 88 filetages au pas diamétral : 1 – 176 DP Fgsdpfx Aboxtu Erstsc Contre-pointe cône Morse : CM 4 Puissance moteur : 5,5 kW Dimensions (L x l x H) : 4450 x 1300 x 1350 mm Poids : 2800 kg Accessoires / Caractéristiques particulières : • Porte-outil à changement rapide marque « Multifix » taille B • Glissières de banc trempées • Butée de banc Siegfried Volz Machines-Outils Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Stanje: novo, Leto izdelave: 2026, CORMAK HBS275 Band Saw for cutting pipes, profiles, and bars is widely used in all metalworking shops where precision, quality, and cutting speed are paramount. This model features a swivel arm from 0 to 60°, with carbide guides for the saw blade. The frame design ensures precise and quiet operation. Machine Characteristics The horizontal band saw for metal with a pivoting arm allows for perpendicular cutting to the axis of the material or at any angle within a 0–60° range. The material can be fed manually or by any mechanical device, while tool feed is automatic. The blade guides are fitted with special carbide and bearing inserts, which greatly influence blade guidance, its service life, straightness, accuracy, and cutting quality. Carbide guiding significantly reduces wear on the machine and blade. The machine is equipped with a powerful coolant pump in a closed-loop system. The arms of the saw are made of one-piece cast iron and, combined with a 27 mm wide cutting blade, enable high-volume series cutting for both profiles and solid materials. The vise is mounted on an adjustable bed and is equipped with a quick-release clamp. The blade guides use hard metal (carbide) plates and a bearing system, ensuring high accuracy and straightness of cuts thanks to carbide guides. The base features a cast iron worktable with a swiveling arm and a control panel on a separate arm. During cutting, the primary cutting motion comes from the movement of the blade, while the arm moves down. The descending speed (cutting speed) is controlled by a hydraulic cylinder. Feed speed is regulated on the saw’s control panel. Two blade speeds are available: 37.5 and 75 m/min. Once the arm reaches the lowest position (after completing the cut), the blade drive switches off automatically. Safety is provided by the blade guards and micro-switches that stop the motor at the end of the cutting cycle or if any guard is opened. Additional protection switches off the saw automatically in case the blade breaks. Power transmission is via a motor with a worm gear drive. The motor is equipped with a thermal protection fuse to prevent overheating during operation. Technical Data: TOTAL POWER: 1.5 kW SUPPLY VOLTAGE: 400V 50Hz ARM DESCENT CONTROL: hydraulic cylinder BLADE SIZE: 2450 x 27 x 0.9 mm BLADE SPEED: 37.5 / 75 m/min VIC HEIGHT: 900 mm MACHINE DIMENSIONS (ARM RAISED) (L x W x H): 1720 x 800 x 1800 mm WEIGHT: 215 kg Cutting Capacity (Diameter x Profile x Square): Angle 0º: ø220 / 260 x 140 / 200 x 200 mm Angle 45º R: ø160 / 160 x 140 / 160 x 160 mm Angle 60º R: ø100 / 120 x 100 / 100 x 100 mm Fgodpsudi Unofx Abtoc Price does not apply to machines purchased in Poland.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel VA 0.2 260 N/mm²) → Total connected load 3 kW → Tube feed-in length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display allows for easy and intuitive programming and operation of the machine. After the tube is inserted, it is fixed in place by the chuck in the carriage, ensuring precise positioning and permitting the production of dimensionally accurate geometries. Standard features also include a tube geometry check before the bending process: if the bending process is started at the wrong position, the machine will not release the bending operation—misoperation is prevented. Optional additional features increase comfort, boost output, and thus enhance the system’s efficiency. Data exchange with the optional TBS-3D pipe calculation software (PC version) is done via USB stick or network. Existing tube geometries can be imported using the software. Standard features: → Servo drive on bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Servo-driven feed → Servo-driven rotation → Three-jaw chuck for clamping the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping force → Programmable early mandrel retraction PLC control: → 10" colour touchscreen → ETH 10/100, X2X Link, 2x USB → Foot switch operation → Data transfer via LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly at the machine. After entering length and angle, the controller automatically calculates the feed values and bending angles. Power supply: 400V 16A Fgodjtr U Hlopfx Abtec Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Stanje: dober (rabljeno), Leto izdelave: 1980, številka stroja/vozila: 27-3, Offer 23317 Technical Data: - Max. working width: 2040 mm - Max. material thickness at 40 kp / mm² strength: 3.5 mm - Bending angle adjustment, electronically pre-selectable: 0 to 135° - Smallest bending radius: 1.25 x sheet thickness Fgjdpfsrklfrox Abtec - Minimum internal flange height: 6 x sheet thickness - Automatic sequence control for a complete work cycle - Operation via hand or foot switch - Maximum opening width / stroke of upper beam: 200 mm - Height adjustment: - of the bending beam: 80 mm - of the lower beam: 80 mm - Upper beam drive: 400 V / 1.1 kW - Bending beam drive: 400 V / 1.5 kW - Manual backgauge, accessible from the front - Required space (approx.): W 3300 x H 1350 x D 1500 mm - Weight (approx.): 2600 kg

Stanje: zelo dobro (rabljeno), 3-phase direct current spot welding machine DALEX Type PMS 11-4 G 3 Fgodohmvawepfx Abtjc Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Electrode force: 100–600 daN Arm reach: 550 mm with mounted control cabinet according to VDE 0100 Main switch Synchronous welding controller 8033 Weight: 740 kg

Stanje: novo, Technical data: Drill diameter: 13 - 32 mm Point angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Motor power: 0.25 kW Weight, approx.: 28 kg Dimensions, approx.: 490 x 250 x 260 mm Features: - Ideal for grinding HSS/carbide twist drills - Safe operation thanks to the forced-feed grinding process - Point angle adjustable from 90° - 140° - Compact design, with collet storage integrated into the machine and a handle for quick stowing - Includes point thinning device to reduce feed force - Device for secondary grinding of the drill edges to reduce friction between drill and workpiece Fodod R A Dkspfx Abtogc - Rotor with precision ball bearings Scope of delivery: - CBN grinding wheel - 20 ER 40 collets, 13 - 32 mm - ER 40 collet holder

Stanje: rabljeno, Leto izdelave: 1997, Leto: 1997 Miza: 1780 x 415 mm Obrati vretena: 30 – 2066 min⁻¹ Fjdpswtd Dysfx Abtsgc Krmiljenje: FIDIA Avtomatsko vpenjalo orodja (Power Draw Bar) Delovna svetilka LOVO Hlajenje

Stanje: dober (rabljeno), Leto izdelave: 1995, premer zgornjega valja: 330 mm, najv. debelina pločevine: 23 mm, Manufacturer: IMCAR Model: SIHR Year of manufacture: 1995 - Extended end for profile bending rolls (Pipe & T-Angle) - Centralized lubrication - Digital readout for side roll position Fodewpku Depfx Abtsgc - Fully hydraulic machine - Hydraulic drop end - Hardened rolls Specifications Metric / US Standard Roll width: 3100 mm Plate thickness at 3x top roll diameter: 18 mm Plate thickness at 5x top roll diameter: 23 mm Pre-bending thickness: 20 mm Top roll diameter: 330 mm Side roll diameter: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min Number of driven rolls: 2 Power: 15 kW Dimensions (approximate) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11,900 kg Please note: The information on this page is provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or terms of contract. We strongly recommend verifying all critical details.