Industrijski robot

FANUC P-250iA

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, The wrist unit is used and has been overhauled. Two units are available. Hodjihb Axopfx Afwjff

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), A welding cell including robot and welding equipment is available. Table dimensions X/Y: 1800mm/900mm, max. workpiece height: 800mm, switching hours: 5,250h, operating hours: 1,244h. 1) Robot: Fanuc ARC Mate 100iBe, year of manufacture: 2006, payload: 6kg, maximum reach: 1,373mm, repeatability: +/-0.08mm, weight: approx. 238kg. 2) Welding machine: Fronius Magic Wave 4000, year of manufacture: 2006. An on-site inspection is possible. Hfedjviv Dlopfx Afwjf

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2006, obratovalne ure: 39.475 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 80022, skupna masa: 520 kg, nosilnost: 15 kg, doseg roke: 2.800 mm, vrtilni razpon: 320 °, proizvajalec krmilnikov: FANUC, model krmilnika: RJ3iC, proizvajalec programirnih enot: FANUC, širina krmilne omare: 800 mm, višina krmilne omare: 1.360 mm, vhodna napetost: 400 V, vhodni tok: 20 A, vrsta vhodnega toka: Klimatska naprava, natančnost ponavljanja: 2 mm, This is a paint robot from Fanuc. It was previously used by BMW for clear coat applications on luxury car bodies and, with its 40,000 operating hours, has seen considerable use. The robots at BMW operated on a rail. For this reason, the controller features a large additional amplifier. A second additional amplifier is used to control motors in the shoulder for gear pumps. However, these motors are not installed. The rail motor would be connected directly to the robot. The cable length between the robot and the controller is 10 meters and can be plugged into the controller directly, which is a notable feature. We can assist with transport and installation if needed. The unit is mounted together with the controller—ready for transport—on a special pallet measuring 2500x800x1600 mm. Currently, it is configured as a left-arm, left-handed robot. It is equipped with line tracking, but this can be easily changed without mechanical modifications. The device is still located at our customer’s site, but if you are seriously interested, it can be inspected under power at Paintrobotics. We have two units available. Hfedotu H Hcspfx Afwef For inspection, we would relocate the unit from Frankfurt to our site.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2007, obratovalne ure: 92 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 82351, skupna masa: 520 kg, nosilnost: 15 kg, doseg roke: 2.800 mm, vrtilni razpon: 320 °, proizvajalec krmilnikov: FANUC, model krmilnika: RJ3iC, proizvajalec programirnih enot: FANUC, širina krmilne omare: 800 mm, višina krmilne omare: 1.360 mm, vhodna napetost: 400 V, vhodni tok: 20 A, vrsta vhodnega toka: Klimatska naprava, natančnost ponavljanja: 2 mm, This is a paint robot from Fanuc. It comes with a very special configuration. It was originally intended as a spare robot for BMW to be used for clear coat painting of luxury bodies. It has never been used and is therefore as good as new. The robots at BMW operated on a rail. For this reason, the controller is equipped with a large additional amplifier, which is included along with the corresponding motor. The motor can be connected directly to the robot itself, allowing for immediate installation on a slide rail. Another special feature of this robot is that a motor is integrated in the shoulder to control a gear pump, enabling precise dosing directly on the robot. The cable length between the robot and the controller is 2x10m, with connectors at the controller. This means 10 meters of cable through, for example, an energy chain on a rail and then an additional pluggable 10 meters to the controller. This is also a notable feature. We offer a 1-year start-up guarantee. We can assist with transport and installation. The robot and controller are mounted ready for transport on a special pallet measuring 2500x800x1600mm. Hedpfx Astu H Avofwsff Currently, it is configured as a right-arm, right-hand robot, but this can be changed easily without mechanical modifications. The device is still at our customer's site, but can be powered up and inspected at Paintrobotics if there is serious interest. For this purpose, we would transport the unit from Frankfurt to our facility.

Stanje: rabljeno, Leto izdelave: 2000, Complete palletizing system, manufacturer Procomac, for 12 x 1.0 PET cycle modular crates and shrink packs, year of manufacture 2000, equipped with Fanuc robot, 1 palletizing head for modular crates, 1 palletizing head for shrink packs, pallet magazine, pallet conveyor, required installation area approx. 150 m². Hfsdpfslu H N Sjx Afwef

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, obratovalne ure: 2.509 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 111313, skupna masa: 520 kg, nosilnost: 15 kg, doseg roke: 2.800 mm, vrtilni razpon: 320 °, proizvajalec krmilnikov: FANUC, model krmilnika: R-30iA, proizvajalec programirnih enot: FANUC, širina krmilne omare: 800 mm, višina krmilne omare: 1.360 mm, vhodna napetost: 400 V, vhodni tok: 20 A, vrsta vhodnega toka: Klimatska naprava, natančnost ponavljanja: 2 mm, This is a paint robot from Fanuc. It features a very special configuration. It was originally designed for painting wind turbine blades and was installed on a 60-meter rail, which also had an additional rail to allow the robot to move up and down. For this reason, two large auxiliary amplifiers are installed in the controller, and the encoder brake module is present in duplicate. Another unique feature is that engines are installed in the shoulder to control two gear pumps. This enables two-component mixing directly on the robot without difficulty. Hfsdpfjtu Hpqsx Afwjf The robot was never actually used in production. The operating hours only accumulated because the robot was powered on. The operator (Enercon) has also confirmed this to me. The actual servo ON time is only 0.2 hours. The robot has slight soiling, but is otherwise practically as new. Unfortunately, the teach pendant and teach cable are heavily soiled, but they can be replaced if needed. The cable length between robot and controller is 5 meters and it connects to the controller via a plug connection—another unique aspect. We offer a one-year commissioning warranty. We can assist with transport and installation. The robot is secured together with the controller on a special pallet (2500x800x1600mm) and ready for transport. We have two units available. The price is valid per robot. Currently, it is configured as a right-handed robot. However, this can be easily changed without any mechanical modifications. The device can be viewed under power at Paintrobotics.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Fanuc R2000iB/210F, 20% popust pri naročilu več kot 1 robota. Hfsdpfx Afoxq Tu Hewof RAZVOJ GSG ROBOTICS GSG Robotics GmbH, ustanovljeno leta 2005 v Güterslohu, ima od leta 2015 sedež v Marl in ponuja široko servisno področje za vzdrževanje in popravila robotov. Z leti smo postali celovit partner na vseh področjih, povezanih z industrijskimi roboti in avtomatizacijo. Smo ponudnik celovitih storitev za dve priznani blagovni znamki robotov: ABB in Fanuc.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2014, številka stroja/vozila: R-00570, nosilnost: 70 kg, doseg roke: 2.050 mm, proizvajalec krmilnikov: R-30iB A-Size, proizvajalec programirnih enot: A05B-2518-C202#EGN, Obnovljen FANUC M-710iC/70, proizveden 09/2014. Robot se isporučuje sa R-30iB A-Size kontrolerom i iPendant upravljačkom ručkom. Naš stručni tim temeljno je testirao robot, nakon čega je izvršeno servisiranje prema specifikacijama proizvođača. Analizirana je mast na sadržaj čestica željeza, čime se procjenjuje stanje odgovarajućih osi. Samo roboti u izvrsnom mehaničkom stanju bivaju u potpunosti obnovljeni, što osigurava dugotrajno rješenje za naše kupce. Zahvaljujući ovom pristupu, sve naše robote isporučujemo sa 12-mjesečnim jamstvenim rokom kao standardom! Marka: FANUC Model: M-710iC/70 Broj modela: A05B-1125-B202 Hfjdpfjyzr Ngex Afwsf Godina proizvodnje robota: 09/2014 Jamstveni rok (mjeseci): 12 Nosivost (kg): 70 Dohvat (mm): 2050 Ponavljivost (mm): ± 0,04 Broj upravljanih osi: 6-osni Način instalacije: Pod, naopako, zidna, montaža pod kutom Težina (kg): 560 Kontroler: R-30iB A-Size Godina proizvodnje ormara: 09/2014 Duljina RCC kabela (m): 7 Teach Pendant: A05B-2518-C202#EGN Duljina kabela Teach Pendant-a (m): 12