Robot Fanuc P-250iA 15

FANUC P-250iA/15

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, obratovalne ure: 2.509 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 111313, skupna masa: 520 kg, nosilnost: 15 kg, doseg roke: 2.800 mm, vrtilni razpon: 320 °, proizvajalec krmilnikov: FANUC, model krmilnika: R-30iA, proizvajalec programirnih enot: FANUC, širina krmilne omare: 800 mm, višina krmilne omare: 1.360 mm, vhodna napetost: 400 V, vhodni tok: 20 A, vrsta vhodnega toka: Klimatska naprava, natančnost ponavljanja: 2 mm, This is a paint robot from Fanuc. It features a very special configuration. It was originally designed for painting wind turbine blades and was installed on a 60-meter rail, which also had an additional rail to allow the robot to move up and down. For this reason, two large auxiliary amplifiers are installed in the controller, and the encoder brake module is present in duplicate. Another unique feature is that engines are installed in the shoulder to control two gear pumps. This enables two-component mixing directly on the robot without difficulty. The robot was never actually used in production. The operating hours only accumulated because the robot was powered on. The operator (Enercon) has also confirmed this to me. The actual servo ON time is only 0.2 hours. The robot has slight soiling, but is otherwise practically as new. Unfortunately, the teach pendant and teach cable are heavily soiled, but they can be replaced if needed. The cable length between robot and controller is 5 meters and it connects to the controller via a plug connection—another unique aspect. We offer a one-year commissioning warranty. We can assist with transport and installation. The robot is secured together with the controller on a special pallet (2500x800x1600mm) and ready for transport. We have two units available. The price is valid per robot. Ledpfx Afjtu Hpqe Ssag Currently, it is configured as a right-handed robot. However, this can be easily changed without any mechanical modifications. The device can be viewed under power at Paintrobotics.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, 5-OSNI LAKIRNI ROBOT CMA MOD. ROBY 5EX-R - RABLJEN - Št. 5 kontroliranih osi - Št. 3 nosilci - Nosilnost zapestja 3 kg - Programiranje z učenjem Karusel * Število rok 3 * Nosilnost posamezne roke 25 kg Obračanje kosa * Gibanje servo krmiljeno in sinhronizirano - Priložen priročnik in CE deklaracija RETROFIT 2024 (OBNOVA NA NOVO) Lasdpjt U Ngaefx Af Sjg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2006, obratovalne ure: 39.475 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 80022, skupna masa: 520 kg, nosilnost: 15 kg, doseg roke: 2.800 mm, vrtilni razpon: 320 °, proizvajalec krmilnikov: FANUC, model krmilnika: RJ3iC, proizvajalec programirnih enot: FANUC, širina krmilne omare: 800 mm, višina krmilne omare: 1.360 mm, vhodna napetost: 400 V, vhodni tok: 20 A, vrsta vhodnega toka: Klimatska naprava, natančnost ponavljanja: 2 mm, This is a paint robot from Fanuc. It was previously used by BMW for clear coat applications on luxury car bodies and, with its 40,000 operating hours, has seen considerable use. The robots at BMW operated on a rail. For this reason, the controller features a large additional amplifier. A second additional amplifier is used to control motors in the shoulder for gear pumps. However, these motors are not installed. The rail motor would be connected directly to the robot. The cable length between the robot and the controller is 10 meters and can be plugged into the controller directly, which is a notable feature. We can assist with transport and installation if needed. The unit is mounted together with the controller—ready for transport—on a special pallet measuring 2500x800x1600 mm. Currently, it is configured as a left-arm, left-handed robot. It is equipped with line tracking, but this can be easily changed without mechanical modifications. The device is still located at our customer’s site, but if you are seriously interested, it can be inspected under power at Paintrobotics. Laedpfxetu H Hco Af Sog We have two units available. For inspection, we would relocate the unit from Frankfurt to our site.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2007, obratovalne ure: 92 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 82351, skupna masa: 520 kg, nosilnost: 15 kg, doseg roke: 2.800 mm, vrtilni razpon: 320 °, proizvajalec krmilnikov: FANUC, model krmilnika: RJ3iC, proizvajalec programirnih enot: FANUC, širina krmilne omare: 800 mm, višina krmilne omare: 1.360 mm, vhodna napetost: 400 V, vhodni tok: 20 A, vrsta vhodnega toka: Klimatska naprava, natančnost ponavljanja: 2 mm, This is a paint robot from Fanuc. It comes with a very special configuration. It was originally intended as a spare robot for BMW to be used for clear coat painting of luxury bodies. It has never been used and is therefore as good as new. The robots at BMW operated on a rail. For this reason, the controller is equipped with a large additional amplifier, which is included along with the corresponding motor. The motor can be connected directly to the robot itself, allowing for immediate installation on a slide rail. Another special feature of this robot is that a motor is integrated in the shoulder to control a gear pump, enabling precise dosing directly on the robot. The cable length between the robot and the controller is 2x10m, with connectors at the controller. This means 10 meters of cable through, for example, an energy chain on a rail and then an additional pluggable 10 meters to the controller. This is also a notable feature. Ledpfetu H Avjx Af Ssag We offer a 1-year start-up guarantee. We can assist with transport and installation. The robot and controller are mounted ready for transport on a special pallet measuring 2500x800x1600mm. Currently, it is configured as a right-arm, right-hand robot, but this can be changed easily without mechanical modifications. The device is still at our customer's site, but can be powered up and inspected at Paintrobotics if there is serious interest. For this purpose, we would transport the unit from Frankfurt to our facility.

Stanje: rabljeno, številka stroja/vozila: 007928, Pozicija 1: Krtačni stroj CEFLA-EASY 2000 + TR2V-FV3 Pozicija 2: Lakirni stroj CEFLA-EASY 2000 + TR2V-FV3 Pozicija 3: Sušilec laka CEFLA-EASY 2000 + TR2V-FV3 Lajdpfx Aewu Acksf Sjg

Stanje: rabljeno, Leto izdelave: 2008, Velikost obdelovanca: 2400 mm Obratovalna napetost: 26,8 V Skupna potrebna moč: 26,8 kW Teža stroja približno: 0,040 t MERILNA ROKA FARO FUSION Leto izdelave: 2008 Merilno območje: 2400 mm Programska oprema: Polyworks (prosimo prenesite zadnjo različico s spletne strani Polyworks, naša je še za Win XP) Dongle za programsko opremo je na voljo in je priložen Dodatki: merilne krogle, orodje, rezervna baterija, kabli, polnilec in originalni transportni kovček Zadnja kalibracija: 2020 REV 26.8 Enkratna točka: 0,0510 mm Volumetrično: 0,710 mm Laedpfx Aex Dda Tef Ssg Več na slikah

Stanje: rabljeno, številka stroja/vozila: 007986, Maksimalna širina plošče: 1000 mm Lajdpfxex A Tggs Af Ssg Maksimalna dolžina plošče: 2000 mm Dolžina transportnega sistema: 3500 mm Povratni transport za kante: desna stran

Stanje: rabljeno, številka stroja/vozila: 008116, Maks. višina obdelave: 120 mm Maks. podajalna hitrost: 25 m/min Ledpfx Afew Iddzo Sjag Število delovnih vreten: 6

Stanje: dober (rabljeno), Leto izdelave: 2016, Industrijski robot Proizvajalec: Kuka Tip: KR30-3 Letnik proizvodnje: 2016 Doseg: 2033 mm Teža: 665 kg Nosilnost: 30 kg Kuka nadzorni sistem KRC4 Teža: 150 kg Programska oprema V8.3.40 Vmesnik X11 Kuka na dotik občutljiv zaslon Lasdpfoq Dz H Tex Af Sog Kuka priključni kabli 22926ä

Stanje: novo, Typ SK-1000-P6 Arbeitsbreite: 1000 mm Minimale Werkstücklänge: 500 mm Arbeitshöhe: 2–150 mm Polierwalzengeschwindigkeit: Frequenzgesteuert Vorschubgeschwindigkeit: 3–12,5 m/min Gesamtmotorleistung: 13,87 kW Scheibenmotor: 1,5 kW × 1 Querantriebsmotor: 1,5 kW × 1 Schraubwalzenmotor: 2,2 kW × 2 Vorschubantrieb: 2,2 kW Heben-/Senkmotor: 0,37 kW × 4 Schwenkmotor: 0,37 kW × 2 Tischhöhenverstellung: 0,55 kW Transportabmessungen: 3650 × 1850 × 2100 mm Gewicht: 4200 kg Ljdpfx Ajdmi Niof Soag