Stroj za upogibanje cevi

ERCOLINA MG 030

Stanje: novo, Features: Bending radii: R10 to R200 (min. R = 1.8 x D) (depending on wall thickness, material, and tube diameter) Max. bending speed: 2 rpm and 3.2 rpm without inverter Operation: NC soft-touch control panel in 8 different languages and foot pedal Number of programs: 30, each with up to 9 bends Control: NC1 Bending direction: counterclockwise Usable length (available in various lengths as required): 1.5 / 3 / 4 / 6 m Dimensions (W x H x D): 1000 x 1500 x 3600 mm (length for 3 m version) Weight: approx. 600 kg (with 3 m mandrel) NOTE: The quoted price refers to the 1.5 m length. Other lengths available upon request! Premature mandrel retraction Positioning and rotation with mechanical stops and precise digital display Pneumatic four-jaw chuck Capacity: Hard copper and aluminium: 60 x 4 mm Steel tube: 60 x 3 mm Stainless steel: 60 x 2 mm Scope of delivery: Machine Standard accessories (incl. foot switch, operating manual, 2 hex keys, 4 sets of clamping jaws, bending grease, 25 mm mandrel rod) Lhedjuudrkjpfx Abbjb Supplied without hydraulic oil

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, Mercodor shredder ZM 44 with a cutting chamber of 600x380 mm, equipped with a 7.5 kW drive. Knife configuration: 19 mm, 3 hooks. Ljdpfxjvupbze Abbjhb

Stanje: novo, Condition: new Delivery time: approx. 8 weeks from order Country of origin: Italy Price: €14,020 Leasing rate: €269.18 Max. diameter (steel tube): 76 mm Length: 370 mm Width: 680 mm Height: 910 mm Weight: 193 kg Max. bending - section modulus: 15 cm³ Standard steel tube: 76 x 3 mm Gas pipe for pipelines: 2" x 5.4 mm Furniture tube: 76 x 3 mm Stainless steel AISI304-318: 70 x 4 mm Stainless steel AISI308 (food-grade): 76 x 1.6 mm Soft brass: 76 x 4 mm Hard copper and aluminium: 76 x 6 mm Soft copper: 76 x 6 mm Conduit pipe (TAZ): 76.3 x 3.25 mm Mepla, Gebereit and similar: 50 x 4 mm Round steel (S275JO): 45 mm Flat steel (S275JO): 75 x 15 upright, 75 x 30 mm Max. bending radius: 380 mm Lsdpfowiq Nhsx Abbshb Min. bending radius: 10 mm Min. tube Ø: 10 mm Max. bending speed: 1/2 rev./min Motor: 3.5 kW Digital bending display Spring-back compensation Quick-change system 2 hexagonal tool holders (40 and 50 mm) Precise positioning of the slide shoe Foot switch Operating instructions Tools not included Model with TCPlus control unit on request

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Technical Data: Sheet length: 4,100 mm Sheet thickness: 6 mm Frame opening: - mm Total power requirement: 15 kW Weight approx.: 11.5 t Dimensions (LxWxH): 5,250 x 2,300 x 2,150 mm Backgauge: 1,000 mm D-Touch 7 touchscreen CNC control, user-friendly with centralized cutting angle adjustment Ball screw, 1,000 mm & automatic swing-up function Support balls in the table for improved material handling Side gauge with scale & T-slot and flip stop Support arms with T-slot and flip stop Cutting line illumination & 1 m foldable finger guard High-performance hydraulic and electronic components Automatic pressure adjustment Lhodjh Ib T Uepfx Abbob Swing-away backgauge Cutting line illumination Foot pedal CE standard for the EU The machines can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Additional machines are ready for demonstration at our location in Staufenberg. Further information is available upon request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991 Model: ITPS III Lhodpfx Aswq Dpqebbsb Serijska številka: ITPS 80C 25 P1C226 Maksimalna sila stiskanja: 800 kN Delovni hod: 115 mm Napajanje: 415 V, 50 Hz, 3 faze Nazivni tok: 119 A Vgrajena moč: 18,5 kW Teža stroja: 4940 kg Inventarna številka: 9.14 Krmiljenje: Delem DA-65R Stroj se zažene, vendar krmilje ne reagira na ukaze. Prejšnji uporabnik je originalno krmilje AMADA zamenjal z DELEM.

Stanje: novo, Pressing force: 40 t Ljdpfxegiud Ho Abbehb Bending length: 1270 mm Clearance between uprights: 980 mm Throat depth: 200 mm Installation height: 320 mm Stroke: 100 mm Working speed: 10 mm/s Drive power: 4 kW Dimensions (L x W x H): approx. 1950 x 1450 x 2100 mm Weight: approx. 3,200 kg Accessories / Special Features: • Manual control for the motorized immersion depth and backgauge o Ball screw spindles o Fine adjustment via handwheel • Upper tool PM 1, consisting of 1 x 835 mm and 1 x 435 mm, lightly offset, R=0.8 mm, pressing load 100 t/m, tip 88° • Universal die 50 x 50 mm with multiple V-openings • Backgauge with ball screw spindles, length = 600 mm • Only one working speed of 10 mm/s for all vertical movements, therefore no light curtain required! • Front support arms • Pendant control panel • Paint finish: dark grey RAL 7031, light grey RAL 7035, yellow RAL 1033 • Operating manual • CE compliant Delivery time: approx. 2–3 months after order receipt plus pre-carriage costs from China to Germany Exclusive agency! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151–153 D - 44143 Dortmund - Wambel

Stanje: dober (rabljeno), Leto izdelave: 2002, From company liquidation: Ljdet Iklkspfx Abbohb Peddinghaus Peddimax 1002 Year of manufacture: 2002 Maximum punching and shearing force: 1000 kN Punches 31 mm holes in 25 mm steel Cuts up to 500 mm at the flat bar shear for material thickness up to 18 mm steel Contact length stop Extensive accessories (special punches) Special punching device SV 90 for holes up to 90 mm Weight: approx. 3,000 kg

Stanje: novo, Capaciteit, Ø mm ----- 57 x 2 Radius, min/max ----- 20/250 Radiussverschil ----- 50/230 Buigsnelheid/herhaalnauwkeurigheid ----- 230º/s. ±0,05° Doo rstanglengte ----- 1.000–∞ Gewicht ----- 5.000 kg Machineafmetingen ----- 3,0 x 1,6 x 1,5 m Buisrotatie ----- 0–360°/sec Lengte-invoer ----- 0–1.800 mm/sec Tolerantiegraad ----- 0,05°/mm Standaardcomponenten voldoen aan VDMA-, ISO- en DIN-normen OPTIES * Online koppeling met CAD-systeem en meetmachine * Automatisch buismagazijn met vrij programmeerbare robot of laadarm * Lasonderzoek en buispositionering elektomagnetische of optische detectie Lodpfx Aoga T E Asbbohb * Vrije radiusbuiging * Simulatie/Botsingscontrole * Verlenging van de bedlengte

Stanje: rabljeno, Combined profile steel shear and punching machine GEKA Type HYD 80 / Hydracrop 80/A Machine no.: 9566 Year of manufacture: approx. 2000 Punching force: 80 tons Throat depth: 300 mm Punching: up to Ø 40 mm in 14 mm sheet Flat bar shear: 450 x 15 mm Angle steel shear: 130 x 130 x 13 mm Square bar shear: 45 x 45 mm Round bar shear: Ø 45 mm Rectangular notcher: up to 12 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz - Back gauge with electric stroke release 500 mm - Worktable with back gauge at punching unit 550 x 380 mm - Working height at punching unit: 1100 mm - Worktable with back gauge at rectangular notcher 550 x 400 mm Lodpfx Abjrz Tutebehb - Working height at rectangular notcher: 930 mm - Approx. 21 pcs. various punching tools - Operating manual - Original paint, not repainted Space requirements (L x W x H): 1800 x 1150 x 1950 mm Weight: 1.7 tons Very good condition

Stanje: rabljeno, Mitre Cold Circular Saw Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of manufacture 1983 Saw blade diameter: 400 mm Cutting range at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Cutting range at 90° rectangle: 305 x 20 mm Cutting range at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Ljdpfx Absd N H A Nebohb Saw blade speed: 10 + 20 m/min, 2 stages Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor left side, 1500 mm - Feed stroke via double feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut saw angle adjustable manually - Hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for saw blade speed - Saw blade lift infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to main machine body - Piece counter with zero shut-off Machine dimensions (L x W x H): 2600 x 1200 x 1900 mm Weight: approx. 1400 kg Good condition