Sistem za lasersko sintranje plastike

Eos EOSINT Kunststoff Laser Laser-Sinter-System P380

Leto izdelave: 2020, stanje: kot nova (razstavni stroj), Premer elektrode: 0,5 do 3 mm Pot gibanja: 300x400x350 mm Certifikat CE potrjuje najvišjo možno stopnjo varnosti Nsdpfx Anjf Hmn Aepswn Celotna serija izdelkov je zasnovana za namestitev na površini Elektrode: premer 0,5–3 mm Pot gibanja po osi X: 300 mm Pot gibanja po osi Y: 400 mm Pot gibanja po osi Z: 350 mm Pot gibanja po osi W: 300 mm Hitrost gibanja po osi C: 30–60 mm/min Hitrost hitrega gibanja po osi Z: 120 mm/min Razmerje stranic: 300:1 Dimenzije mize: 320x440 mm Maksimalni delovni tok: 30 A

Stanje: rabljeno, 1 rabljena varilna naprava Znamka: Fronius Tip: Synergic 3400 G/W/E Za varjenje jekla, nerjavečega jekla in aluminija z MIG/MAG postopkom. Tehnični podatki: Maks. varilni tok: 340 A Možni premeri žice: 0,8/1,0/1,2 mm Priključna napetost: 380 V Obratovalni cikel (ED) 35%: 340 A Digitalni prikazovalnik Dimenzije (D x Š x V): 890 x 460 x 945 mm Nwjdpfxjyl Id Tj Anpen Skupna teža: 139 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Na voljo je visokonatančni rezkalni stroj Röders RXP 500, letnik 2005, približno 160.763 delovnih ur, vreteno približno 100.000 ur, vključno z visokofrekvenčnim vretenom HSK-25 s 50.000 vrtljaji/min, 42-kratnik verižni magazin, HG-senzor, visokonatančna opcija z vključenim hlajenjem vretena ter merilna sonda Renishaw. Teža stroja cca 5.500 kg. Ogled je mogoč po dogovoru. Nedoxyk S Iopfx Anpown

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Nwjdsvv Spkjpfx Anpon Data interfaces: USB

Leto izdelave: 2015, stanje: generalkompletno obnovljen (rabljeno), Laboratory gas generator with a capacity of 12.5 liters/min and a residual oxygen content of 0.5%. The unit has been completely overhauled by us, Airtech Stickstoff GmbH, as an authorized partner of Parker. We can also handle the servicing for you. Nedpfx Anon R Nauepjwn

Leto izdelave: 2014, stanje: rabljeno, Rabljena linija za prašno lakiranje. Zaustavljena leta 2024. - Mešalnik za posode Mixaco, tip CM1000-MT, s 4 x inox rezervoar 800 litrov, letnik 2014 - Ekstruder Coperion, ZSK 43 MV, letnik 2014 - SBS hladilni transporter, širina 800 mm x dolžina 5000 mm - Mlin Hosokawa Alpine, tip ACM40 EC CL, letnik 2014 - Dozirna naprava Gericke, tip GL D 7, letnik 2014 - Naprava za podajanje Hosokawa, letnik 2014 - Tlačni filter Hosokawa Alpine, letnik 2014 - Inox ciklon, premer 500 mm - 2x rotirno sito AZO, tip E 240 - Žepni filter s 45 kW električnim motorjem - Hladilna enota Climaveneta, tip NX/K 0914P - Hladilna enota Climaveneta, tip NX/K 0552P Njdpfx Ansvxrm Uspjwn

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Zelo lep AMT PostPro SFX parni polirnik. Priloženi so parametri za TPU in PA12. Vključuje vse dodatne pripomočke, kot je spodnje stojalo. Nwedpfx Asy Dgluonpen Poleg tega je sistem opremljen z namensko razvitimi recepti za uporabo potrošnega materiala drugih proizvajalcev, kar omogoča prihranek približno 70%!

Stanje: novo, Leto izdelave: 2018, Available: 3 units (new) MADIGAS nitrogen generators from Parker are designed to produce nitrogen gas from compressed air, providing an economical, reliable, and safe alternative to conventional bottled or liquid nitrogen supplies. Nitrogen is used as an inert, clean, and dry gas for the removal of oxygen from products and processes. Overall dimensions: Width 450 x Depth 609 x Height 1034 mm Nwodpfxsvdty Tj Anpjn Minimum/maximum working pressure: 6/10 bar Weight: 196 kg Volume: 29.3 liters Voltage: 110/230 V Year of manufacture: 2018

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 9.000 h, potovalna razdalja osi X: 300 mm, število osi: 3, Kovinski 3D-tiskalnik, leto izdelave 2017. Ta TRUMPF TruPrint 3000 ima gradbeno prostornino Ø 300 mm × 400 mm in je opremljen s 500 W vlakenskim laserjem. Zagotavlja visoke hitrosti tiskanja in visoko gostoto gradnje, zato je primeren za različne aplikacije. Če iščete visokokakovostne možnosti 3D-tiskanja kovin, razmislite o modelu TRUMPF TruPrint 3000, ki ga ponujamo v prodajo. Za več informacij o tem stroju nas kontaktirajte. • Gradbena prostornina: Ø 300 mm x 400 mm Nwsdpozu S Dbofx Anpen • Konfiguracija laserja: 1x 500 W vlakenski laser • Moč laserja: 500 W • Omrežna napetost: 360 – 440 V • Frekvenca: 50/60 Hz • Nadzorna napetost: 24 VDC • Priključna moč: 15 kVA • Polni tok: 32 A • Dovod dušika (N₂): 6 – 10 bar • Dovod argona (Ar): 6 – 10 bar • Zračni tlak: 5 – 10 bar • Delovne ure laserja: približno 9.000 ur • Zadnje vzdrževanje: 02/2024 • Stanje: zelo dobro • Material za obdelavo: izključno AlSi10Mg • Validirani parametri: Visoka hitrost / Visoka gostota • Hitrost gradnje „Visoka hitrost“: 57 cm³/h pri debelini plasti 60 µm in gostoti 99,6 % • Hitrost gradnje pri visoki gostoti: 27 cm³/h pri debelini plasti 60 µm in gostoti 99,9 % • Dodatna oprema (opcija): • Postaja za razpakiranje • Hladilnik • Viličar • 11 gradbenih plošč • 2 nova filtra • Dodatna oprema (opcija), leto izdelave: 2017 • Stanje dodatne opreme (opcija): zelo dobro Razpoložljivost: približno v 3. četrtletju 2026

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, obratovalne ure: 50 h, skupna dolžina: 1.000 mm, skupna višina: 500 mm, skupna širina: 500 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 550 kg, temperatura: 280 °C, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 28 °C, natančnost pozicioniranja: 0,1 mm, debelina stene: 1 mm, zahteva za prostor dolžina: 2.715 mm, potrebna višina: 2.765 mm, potrebna širina: 2.170 mm, High-Performance Materials: Best-in-Class Print Heads With its nozzles, the STUDIO G2 is ready for printing with fiber-reinforced and other industrial-grade materials at maximum speed and precision. The specially developed extruder delivers a high level of detail fidelity with layer thicknesses starting from 0.1 mm on objects up to one meter in length. This enables more options for perfecting the mechanical properties of a component. Optimal Printing Temperatures: The Temperature-Controlled Build Chamber The closed, temperature-regulated print chamber of the STUDIO G2 creates ideal conditions for printing with industrial-grade materials. Transparent doors provide operators with the ability to visually monitor the printing process, offering safe and easy access to the print bed. User-friendly features, such as automatic pausing when the housing is opened, ensure a smooth and safe printing process. Independent Temperature Control: Heated Filament Chambers Nodpowgbcyjfx Anpswn The integrated heated filament chambers in the STUDIO G2 ensure that printing materials remain dry in a constantly controlled environment, guaranteeing print quality unmatched in this class. The filament chamber exceeds industry standards by offering temperature control independent of the build chamber. Optimal Printing Temperatures: Rapid-Heating Print Bed Minimal preparation time thanks to a rapidly heating print bed. Increased bed temperatures up to 100°C improve adhesion for a wider range of materials. The new inductive sensor enables fast, precise semi-automatic bed leveling. Simple & Intuitive: The New Slicer The user-friendly BigRep "BLADE" slicing software allows for greater control over printing parameters and provides presets for all BigRep-compatible materials, ensuring a fast and seamless start to printing. BLADE is one of the fastest and most precise slicers on the market, specifically optimized for large-format prints. Large Enough for Every Idea: The Spacious Print Area Create space for innovation with the large print volume of the STUDIO G2, measuring 500 mm x 1000 mm x 500 mm, housed in a compact enclosure with features optimized for the rapid production of large-format, industrial-grade parts in high resolution.