Dvojna poševna žaga

Emmegi Twin Libra TU/6

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SÇ 403 Alüminyum Pvc Kesim Makinası, • V skladu s standardi CE. • Namenjen za rezanje aluminijastih in PVC profilov. • Hidro-pnevmatsko rezanje. Kjdpfsramrzex Adkjlp • Prilagoditev hitrosti rezanja glede na profil. • Možno rezanje pod fiksnimi koti desno in levo: -60, -45, -30, -22,5, -15, 0, +15, +22,5, +30, +45, +60 stopinj. • Pnevmatski vertikalni in horizontalni stiskalec. • Aluminijasta žaga z diamantno konico Ø600 ali Ø650 mm. • Na voljo valjčni transporter (3 metre desno in levo). • Sistem za pršenje olja. • Natančno rezanje zahvaljujoč 3 kW motorju in Hydro-check systemu. • Možnost dela z digitalnim merilcem.

Stanje: rabljeno, Leto izdelave: 2021, premer žaginega lista: 800 mm, vrtljajska hitrost (min.): 1.450 obr/min, moč: 5,5 kW (7,48 KM), Cut-off Saw AS Very good, well-maintained condition Saw blade diameter: 800 mm Sturdy steel tube base frame High-performance saw motors Pneumatic material clamps (3 units, vertical) Kljdpfx Asd Szf Nedkep Two-hand safety controls Coolant system Protective cover Optional with length measuring system or automatic positioning system Available as a saw-drilling automatic machine or saw-punching automatic machine on request.

Leto izdelave: 1994, stanje: dober (rabljeno), Rivo bandsaw sharpening machine Model GA 250 Klsdpfxspl D Hxj Adkop

Stanje: rabljeno, EWAG WS 11 SP je brusilni stroj za orodja, zasnovan za natančnost, visoko točnost in zanesljivost. Delovne zmogljivosti: hod osi X/Y/Z 100 mm, premer brusilnega koluta 75 mm, hitrost vretena obdelovanca 100–1300 obr/min, vertikalna nastavitev brusne glave 100 mm, horizontalno 165°, hitrost brusilnega vretena 2500–7100 obr/min, vpenjanje s kleščami 20 W. Tehnični podatki: priključek 50 Hz 3x380 V, skupna priključna moč 2 kVA, masa stroja cca 400 kg, dimenzije D850׊850×V1580 mm. Oprema: prirobnica za brusilni kolut, odsesavanje prahu, set brusilnih kolutov, svetilka, spiralna brusilna glava W20, pomikalna enota (Z-os) 4 E-M, brusni hod 3 J. Omogoča doseganje strogih toleranc; značilna uporaba v avtomobilski industriji, urarstvu, strojništvu, letalstvu in medicinski tehniki. Kjdpjxyi I Ijfx Adkjlp

Stanje: rabljeno, Leto izdelave: 2010, Suitable for the automatic grinding of tooth face, tooth back, and blade body on carbide-tipped circular saw blades in a single clamping operation. All common tooth geometries (flat, alternate, trapezoidal tooth, etc.) can be ground automatically and in a single pass. Ksdpewp Eblofx Adkjlp Accessories: - Full enclosure - Measuring probe - Device for grinding with oil cooling - Automatic fire extinguishing system - Grinding mist extraction N 183 - Alphanumeric keypad - Oil catch tray - Machine lamp Saw diameter: 80–840 mm Bore diameter: from 10 mm Blade thickness: < 8 mm Tooth pitch: 6–120 mm Cutting length:

Leto izdelave: 2002, stanje: rabljeno, Pressure: 63 t Reach: 315 mm Stroke: 8–100 mm Stroke rate: 140 strokes/min Ram adjustment: 63 mm Table surface: 1200 x 630 mm Ram surface: 800 x 315 mm Through hole in table: Ø 110 mm Table height: 820 mm Ram bore: Ø 50 mm Installation height: 335 mm Total power requirement: 7.5 kW Machine weight: approx. 5 t Pneumatic clutch-brake combination Centralized oil lubrication Hydraulic overload protection Manual stroke adjustment Manual ram adjustment Klodpfx Adslp U D Tsksp Two-hand operation Foot control Roller block strips in table Hydraulic clamp on the ram Counterbalance cylinder Approved for manual loading operations

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90 degrees, round: 115 mm Cutting range at 90 degrees, square: 95 mm Cutting range at 90 degrees, rectangular: 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Klodpfx Ajfg Rlcodksp Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, designed for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic mode. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP controller, allowing the programming of up to 1000 different cutting programs—each with different cutting lengths and quantities—for the same material thickness.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, obratovalne ure: 6.000 h, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 810 mm, premer brusilnega koluta: 125 mm, CHP250 is an automatic machine for grinding the complete tooth geometry of carbide-tipped circular saw blades. Kjdpfx Aeykmxtjdkslp Version equipped with two CNC axes and full enclosure. Technical data: Circular saws Outer diameter: 80 to 810 mm Bore diameter: 10 to 220 mm Blade thickness: up to 8 mm Tooth pitch: 6 to 120 mm Rake angle: -30° to +50° Clearance angle: 5° to 45° Tooth height difference: up to 3 mm Back bevel on the tooth rear: up to 45° Bevel on the tooth face: up to 15° Grinding path: up to 20 mm Grinding wheel diameter: 125 mm CHP250 On the CHP250, two CNC axes control the bevel grinding and the grinding wheel feed. This enables every tooth geometry, on the face or back, to be ground in a single rotation. A central lubrication system and an extraction unit are included. Effective coolant (oil or emulsion) cleaning is provided by a Seitz band filter system (year 2010). Up to three machines can be connected to the filter system. The base is made of stainless steel. Condition: very good.

Stanje: zelo dobro (rabljeno),

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, The Vertical Machining Centre enables drilling, milling, cutting, and notching operations within the technical parameters specified in the manual, on workpieces made of: plastic, PVC, ABS, methacrylate, polycarbonate, thermoplastic, composite, and aluminium materials. The vertical worktable allows for easy loading and unloading of processed parts and minimises the maximum dimensions of the machine to the essential minimum. Tool changing using a 10-position side-mounted tool magazine enables a wide range of operations without the need to remove the workpiece from the table. Maximum workpiece dimensions: Kedpfjmzbr Ssx Adkolp X = 4200 mm Y = 1600 mm Z = 20 mm Rapid traverse speed (m/min): X = 30 Y = 30 Z = 15 Milling head units T1 and T2: Spindle power (kW): 3.3 Spindle speed (rpm): max 18,000 Electric spindle with clamp – ER32 Drilling head unit T3: Spindle motor power (W): 370 Spindle speed (rpm): max 2,800