CNC stružnica

EMCO TURN E45

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 6.615 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R2EV3403, stružna dolžina: 310 mm, premer struženja: 220 mm, največja hitrost vretena: 6.300 obr/min, premer struženja nad ležiščem sani: 430 mm, prehod palice: 45 mm, TECHNICAL DETAILS Working Area Swing over bed: 430 mm Max. turning diameter: 220 mm Max. turning length: 310 mm Max. bar capacity: 45 mm Distance between centers: 687 mm Slide Travel X-axis travel: 160 mm Z-axis travel: 310 mm Main Spindle Spindle interface according to DIN: 55026 KK5 Front spindle bearing diameter: 80 mm Hollow chuck cylinder max. through-hole: 45 mm Max. chuck size: 160 mm Spindle speed range (infinitely variable): 0–6,300 rpm Max. torque: 78 Nm C-Axis (Rotary Axis) Resolution: 0.001° Spindle indexing (disc brake, for driven tools): 0.01° Feed Drives Feed force X: 4 N Feed force Z: 6 N Rapid traverse speed X: 20 m/min Rapid traverse speed Z: 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Positioning accuracy P₉ according to VDI 3441 in X/Z: 3 / 3 μm Tool System Toolholders according to DIN: 69880 VDI30 Tool cross-section for square tools: 20 x 20 mm Shank diameter for boring bars: Ø32 mm Number of tool stations / driven (option): 12 / 6 Turret indexing time: 0.14 s MACHINE DETAILS Total power requirement: 17 kW Dimensions & Weight Space requirement: 2.25 x 1.63 x 1.94 m Iedoxvrv Topfx Agpja Machine weight: 3.3 t Operating hours: 6,615 h EQUIPMENT integrated holding brake for driven tools disc-type turret with directional logic AC motors on X and Z axes

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, poteza s peresom: 190 mm, hitrost vretena (min.): 41 obr/min, največja hitrost vretena: 1.800 obr/min, skupna masa: 1.920 kg, teža obdelovanca (maks.): 17 kg, najv. debelina jeklene pločevine: 32 mm, vrtilni moment: 250 Nm, višina mize: 900 mm, Used DONAU Rapid Radial Drilling Machine Type DR 32 - Fully overhauled by vaumatec in 2022 - Equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 support feet to relieve the table frame) Technical data: Drilling capacity (solid material): St 60/E335, Ø 32 mm (with feed rate 0.20 mm/rev): GG 22, Ø 45 mm Tapping capacity: St 60/E355, M26 Tapping capacity: GG22, M35 Tool holder: MT4 Column diameter: Ø 195 mm Spindle nose to table distance (min./max.): 260/660 mm Table height: 900 mm Quill stroke: 190 mm Iodpfxern Riqs Agpsa Column travel: 400 mm Spindle speeds, Range I: 41-1800 rpm Feeds: 0.1-0.15-0.20-0.3 mm/rev Spindle torque: max. 250 Nm Arm travel resistance (radial): 25 N Arm travel resistance (axial): 25 N Clamping force (radial): 3500 Nm Clamping force (axial): 5500 N Feed force: 7500 N Max. permissible mass: 17 kg Max. permissible moment of inertia: 0.002176 kgm Workpiece: Max. table load: 1000 kg Center of gravity: centered on the working surface

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R2EV3502, stružna dolžina: 310 mm, premer struženja: 220 mm, potovalna razdalja osi X: 160 mm, pomik po osi Z: 310 mm, največja hitrost vrtenja: 6.300 obr/min, skupna dolžina: 1.630 mm, skupna širina: 2.250 mm, skupna masa: 3.300 kg, prehod palice: 45 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, TECHNICAL DETAILS Swing diameter over bed: ø 430 mm Maximum turning diameter: ø 220 mm Maximum turning length: 310 mm Ijdpfxswxwvaj Agpoa Maximum bar capacity: ø 45 mm Distance between centers (spindle nose - tailstock center): 687 mm Carriage travel range Carriage travel X-axis: 160 mm Carriage travel Z-axis: 310 mm Main spindle Spindle nose according to DIN 55026: KK5 Spindle external diameter at front bearing: ø 80 mm Main spindle drive AC motor, power (100%/40% duty cycle): 9/13 kW With integrated holding brake for driven tools Speed range (steplessly adjustable): 0–6,300 rpm Max. torque: 78 Nm C-axis (rotary axis) Rotary axis resolution: 0.001° Input Sinumerik/Fanuc drive: 1,000 / 100 rpm Spindle indexing (disc brake, for driven tools): 0.01° Feed drives AC motors on X and Z axes Feed force X/Z: 4,000 / 6,000 N Rapid traverse speed X/Z: 20 / 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Positioning scatter Pₛₙ according to VDI 3441 in X/Z: 3 / 3 µm Tool system Disc turret with directional logic Tool holders according to DIN 69880: VDI 30 Tool interface for square tools: 20 × 20 mm Boring bar shank diameter: ø 32 mm Number of tool stations: 12 Turret indexing time: 0.14 s MACHINE DETAILS Total power requirement: 17 kW Machine weight: approx. 3.3 t Installation space: 2.25 x 1.63 x 1.940 m

Stanje: rabljeno, Leto izdelave: 1979, X-hod 800 mm Y-hod 300 mm Z-hod 400 mm Območje vrtljajev 25 - 2.000 min^-1 Pogonska moč 4 kW Pomik 5 - 500 mm/min Hitri pomik 1,5 m/min Delovna miza: 1.000 x 700 mm Vpenjalni stožec SK40 Teža 1,8 t Prostorske zahteve cca 2,50 x 2,40 x 2,00 m Iodpfowwwqhsx Agpea Stroj je v dobrem stanju Digitalni prikaz je pokvarjen (merilni trakovi delujejo) Izmenljiva rezkalna glava Brez dodatne opreme

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Control: OSP-P20L-R Swing diameter over bed: 450 mm Swing diameter over cross slide: 350 mm Iedpfx Agovk Sqkjpoa Swing diameter over compound slide: 300 mm Spindle bore: 43 mm Spindle speed range: 75 - 3,000 rpm X-axis feed: 0.00001 - 39.37 mm/rev X-axis rapid traverse: 20 m/min Z-axis feed: 0.00004 - 38.37 mm/rev Z-axis rapid traverse: 25 m/min Tool turret: 12 stations Driven tools Tool holder: VDI30 Machine weight: approx. 3,800 kg Bar loader: BREUNING IRCO

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 83 mm, stružna dolžina: 1.000 mm, premer struženja: 570 mm, premer struženja nad zgornjim sanežem: 340 mm, premer tulec: 80 mm, hod vretena: 200 mm, skupna masa: 3.200 kg, zunanji premer vpenjalne glave: 250 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Machine is in very good condition. Iodpfjwxw S Isx Agpsa Available immediately! Can be tested under power.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8044000703A, Siemens 840 D control Country of manufacture: EU – Poland Voltage: 400V Dimensions: 3082x2260x1775 mm (with chip tray) 4228x2260x1775 mm (with chip conveyor) Net machine weight: 3400 kg TECHNICAL SPECIFICATIONS CTX 310 ecoline V1/V3 New Design Working capacity Swing over bed: 330 mm Swing over cross slide (X): 260 mm Maximum turning diameter: Ø 200 mm Chuck diameter: Ø 210 mm X-axis travel: 182.5 mm Z-axis travel: 455 mm Centre height: 190 mm Distance between centres: 581 mm Feed drive Rapid traverse X and Z axes: 30 m/min Control: Siemens Sinumerik 840D Slim Line C-axis with Siemens control Iodpew T Sqyefx Agpsa Speed: 0 – 100 rpm Torque: 112 Nm Accuracy: < 0.04° Spindle Spindle nose: 140 h5 mm Front bearing diameter: 100 mm Spindle bore: Ø 74.3 mm Bar capacity: 51 mm Main drive with Siemens control Drive power (40% / 100% duty cycle): 16.5 / 11 kW Torque (40% / 100% duty cycle): 166.5 / 112 Nm Max speed: 5,000 rpm Tool turret Number of tool stations: 12 Tool holder: DIN69880 (VDI 3425) Turret disc diameter: 30 mm Tool change (with locking): 0.95 sec Tool change (without locking): 0.4 sec Powered turret with Siemens control Number of driven tools: 12 Drive power (40% duty cycle) at 4000 rpm: 8.4 kW Torque (40%): 20 Nm Max speed: 4,500 rpm Tailstock Automatic movement: 396 mm Quill bore: flange Maximum quill axial force: 400 daN Hydraulic unit Tank capacity: 50 L Maximum pressure: 50 bar Cooling system Tank capacity: 175 L Capacity with conveyor: 200 L Pump power: 0.85 kW Pump flow at 5 bar: 30 L/min Electrical connection Maximum power: 21 kVA Current: 400V Frequency: 50–60 Hz Fuses: 33A Pneumatics Compressed air connection: 6 bar Environmental conditions Ambient temperature: +15 to +35°C Maximum humidity: 75% Unless otherwise stated, the technical information is provided without guarantee of accuracy or completeness.

Stanje: dober (rabljeno), Leto izdelave: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year: 2018 Only approx. 1,000 spindle hours since spindle replacement Total machine hours: approx. 20,500 2024: Spindle replaced (18,000 rpm) 2024: Geometry re-calibrated Travel paths: X 650 / Y 850 / Z 500 mm Rotary table: 360° continuous Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle taper: HSK-A63 The machine is equipped as follows: - 60-position tool changer - ICS (20 bar) with belt filter system - Air through spindle - Kessler table, 500 mm diameter - Infrared part measurement – 3D probe - Tool measurement via BLUM laser - Rotational viewing window - POS DCM collision module - Mobile electronic handwheel - Oil mist extraction - Heidenhain linear measuring systems X, Y, Z - Purge air for all linear measuring systems - Active air-to-air electrical cabinet cooler - Active cooling for 4th & 5th axis, controlled - Network and USB connection - Controlled spindle chiller - Heidenhain rotary measuring system - POS contour monitoring - External hinged belt chip conveyor - Coolant pump at head, controlled via M functions - Pump for chip rinse system - Chip rinsing equipment - Machine status indicator Ijdewz I Acspfx Agpea - Air at spindle - Oil/coolant separator, electromechanical - Automatic coolant level monitoring - 3-fold media connection at table center - Hydraulic unit incl. control via M function Connected load: 60 kVA Installation dimensions: W 4800 / D 4600 / H 3000 mm + ICS unit (LxWxH): 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in very well-maintained condition and comes from a small, family-run company. In 2024, the spindle was replaced and geometry was calibrated (guides repaired and aligned). Since then, the machine has seen only limited use.

Leto izdelave: 2017, Stanje: pripravljen za uporabo (rabljen), Laser power: 10kW (10,000W), Working area: 3000mm x 1500mm, Maximum material thickness: Mild steel: 25mm, Stainless steel: 30mm, Aluminium: 30mm, Copper: 12mm, Brass: 15mm. Positioning speed: 120m/min, Positioning accuracy: +/-0.05mm, Maximum workpiece weight: 1,100kg. Machine dimensions (X/Y/Z): approx. 9500mm x 3500mm x 3500mm, Extraction unit dimensions (X/Y/Z): approx. 1500mm x 1500mm x 4000mm, Machine weight: approx. 12,000kg, Operating hours: approx. 17,000h. Documentation available. On-site inspection possible. Expected to be available from June 2025. Isdsvyiqgepfx Agpja

Stanje: rabljeno, Leto izdelave: 1998, maks. premer obdelave 20 mm maks. dolžina obdelave 320 mm premer vrtanja 10 mm premer prehoda vretena 24 mm hitrost vretena 200 - 8.100 min⁻¹ Upravljanje MITSUBISHI CNC - avtomat za vzdolžno struženje | CITIZEN - M-20 opremljen s podajalnikom palic. Stroj je zelo dobro vzdrževan. Video stroja na lokaciji tovarne z veseljem posredujemo na zahtevo. Ijdpfevnwf Iex Agpoa Za dodatne tehnične podrobnosti si oglejte ponudbo. ----- #Tags: M20 | M 20