Stroj za brušenje nožev

Emco Maximat Super 11

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar diameter of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with 2 high-performance spindles with a 66 mm bar capacity, 2 turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis for both upper and lower turret. A 35-bar high-pressure coolant system with filtration and an additional tank is included. Please refer to the attached brochure for further details or contact us directly. Equipment: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter Lhjdpfexmhdnjx Aacoc - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Coolant washing nozzle - TA/06000/10 coolant chiller, 8000 W - Machine status light - Tool life management - Tool load monitoring - Programmable automatic part catcher (pneumatic) - The parts extractor is equipped with a pneumatic gripper for part removal (opens and closes pneumatically) - Pneumatic ejector for sub spindle with 100 mm adjustable stroke, end position detected by sensor - Coolant supply through right-hand spindle - Interface for bar loader (unimag) - Preparation for extraction unit, connection flange Ø100 The machine is supplied with chip conveyor, coolant unit and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information available on request.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machinable length: 200 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 8,000 [rpm] - Spindle drive power: 1.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 10 - Number of driven positions: 5 - Driven tool speed: 5,000 [rpm] FRONT TOOL POST - Number of positions: 4 SUB OPERATIONS - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Footprint: 2,110 x 1,085 [mm] - Machine height: 1,832 [mm] - Machine weight: 2,200 [kg] MACHINE HOURS - Operating hours: 32,264 [h] ACCESSORIES - Controller: Meldas - Driven guide bushing - Parts catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump Lhsdpfsuhazgjx Aacec - Bar feeder: FMB MINIMAG 20

Stanje: rabljeno, Leto izdelave: 1969, Wheel diameter - max. 160,175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Centre distance between centres 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Axis distance between cutter and workpiece - max. 138 mm Axis distance between cutter and workpiece - min. 30 mm Milling head - swivelling 120° Cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Lhedpevzhf Sjfx Aacjc Equipment/accessories: - Change gears - Milling arbors - Clamping devices - Documentation

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 650 mm, pomik po osi Z: 550 mm, največja hitrost vrtenja: 12.000 obr/min, skupna masa: 7.500 kg, For sale: CNC 5-axis machining center, brand DMG, model DMU 60 P The machine is fully functional and ready for immediate use. In 2021, a new spindle was installed and all maintenance work has been carried out. History: 2019: New ball screw (KGT) 2021: New spindle Lhjdpfx Aaewbhq Hscjc 2022: Single-shift operation 2023: Occasional job orders 2024: Taken out of operation but still connected to the power supply 12/2025: Disassembled, cleaned, and placed into storage Technical data: X-axis travel: 600 mm y-axis travel: 650 mm z-axis travel: 550 mm Control system: Heidenhain TNC 426 Spindle speed range: max. 12,000 rpm Spindle drive power: 15 kW Max. torque: 130 Nm Tool holder: SK 40 Table diameter: 630 mm Max. table load: 500 kg Number of tool stations: 60 positions Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 m/min Feed speed: 20 - 10,000 mm/min Total power requirement: 44 kVA Space requirement approx.: 7.0 x 6.0 x 2.7 m Machine weight approx.: 7.5 t No chucks or vices are included in the offer. Transport and loading can be organized throughout Europe upon request and for an additional charge. Prices are quoted plus VAT. Viewing by appointment is possible. Contact us—our team will be pleased to assist you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you planning to sell your machine? For further information or to contact us, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 25.05.004, skupna dolžina: 9.500 mm, skupna širina: 2.250 mm, skupna višina: 2.300 mm, vhodna napetost: 380 V, moč: 50 kW (67,98 KM), skupna masa: 21.000 kg, lastna masa: 18.000 kg, priključek za stisnjen zrak: 7 letvica, Oprema: dokumentacija / priročnik, Paper size 730 x 1060 mm and printing area 710 x 1040 mm Paper thickness 0.05 mm - 0.5 mm Set maximum speed (due to simulating sheet travel times of high-speed presses) is 4,000 per hour, but the machine can run much faster for commercial jobs. Four-cylinder central impression drum which completes all four print units in a single gripper closure. 1988 FAG Speedproof with control console for ink fountains and cylinder adjustment, ensuring extremely precise register printing. Attached is an original factory brochure. Fully dry ice cleaned, and the cylinders are in very good condition. This machine is offered strictly on an “as is” basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is strictly fixed and based on the removal of parts that we could otherwise sell separately, such as: - The Mabeg feeder with vacuum belt infeed; - The four-section Baldwin stainless steel unit, providing each color with its own basin, a mixer, and adjustable temperature—meaning each basin can be set to a different temperature and alcohol content. We have dry ice cleaned the machine. The original intent was to use it prominently for printing electronic paper, but due to excessive startup losses, the project was discontinued. The machine has been with us for three years now, and due to its size I want it sold quickly. Hence, this very low price—it's an excellent machine. If the machine needs to be set up for testing and trial runs, this is possible at an additional cost of €10,000, of which €5,000 must be paid upfront as a deposit under specific conditions. All relevant information can be found in the original FAG brochure available as a PDF via this advertisement. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) Ljdpeuf Sy Ajfx Aacohc - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lb) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, DOOSAN PUMA 400LMA FANUC 32i (Jahr 2011) HAUPTSPEZIFIKATIONEN: - CNC FANUC 32i mit 10,4” LCD-Farbdisplay und Manual Guide - Umlaufdurchmesser über Bett: 770 mm - Umlaufdurchmesser über Schlitten: 590 mm - Max. Drehdurchmesser: 560 mm - Max. Drehlänge: 2.064 mm - X/Z-Verfahrwege: 357 mm / 2.155 mm - Stangendurchlass: 90 mm - Hydraulisches Spannfutter Durchmesser 400 mm Lsdpsyb Sqpofx Aacohc - Spindel: 22 kW / 3.000 U/min (ASA A2-8) - BMT 75P Revolver mit 12 Stationen und angetriebenen Werkzeugen - Angetriebene Werkzeuge: 7,5 kW 3.000 U/min INKLUSIVE AUSSTATTUNG: - S-HS-12 Hydraulikspannfutter Durchmesser 305 mm mit Backensatz - C-Achse 360º (0,001º) - Automatischer Werkzeugvermesser - Programmierbarer Reitstock - Hochdruckpumpe 14,6 bar - Späneförderer - Vorbereitung für hydraulische Lünette (Sockel, Logik, Hydraulik) - SMW SLU X-4-ZS Hydraulik-Lünette Durchmesser 30-245 mm - Komplettes Halterset mit 4 Innen-, 4 Außen- und 4 angetriebenen (2 winkel- und 2 gerade)* - Satz Handbücher und Dokumentation ZUSTAND: Maschine in EXZELLENTEM Zustand, unter Strom in Barcelona zur Besichtigung.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7/61, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 760 kg Customs tariff number: 8459.2930 External dimensions: approx. 1250x1000x1700 mm TECHNICAL DATA: WORKING AREA X and Y travel: 200x200 mm Vertical quill stroke: 250 mm Drill spindle travel: 70 mm Max. clearance between table and spindle nose: 330 mm Clearance between column and spindle center: 260 mm Max. drilling capacity (in steel): 10 mm Max. boring capacity: 50 mm TABLE Usable surface: 400x300 mm Load capacity: up to 100 kg X and Y movement: motorized Number of T-slots: 6 (longitudinal) DRILLING HEAD Drill spindle internal taper: Morse 0 Drill spindle speed, steplessly adjustable: 150-3000 rpm Drill spindle feed: 0.015 mm/rev Measurement system: direct, optical Measuring elements: graduated scales, division 1 mm Readout: screen Zero-point shift: yes Direct readout: 0.001 mm Guaranteed positioning accuracy: 0.002 mm Installed power: 1.2 kW Ledpod Amgkjfx Aacshc All technical data subject to change or error. Inventory no. 2160006, Machine equipped with: 1 rotary table Ø 220 with optical measurement 1 centering microscope with three-point suspension, 40x magnification, illumination 1 centering device with dial gauge, capacity 3 mm, MK0 1 center point MK0 1 touch probe with spring-loaded tip MK0 1 center punch MK0 1 chuck for centering drills MK0 1 self-tightening drill chuck 0-5 mm, MK0 1 boring head type 0, capacity 0.5-30 mm, MK0 1 leveling foot with 2 round leveling supports

Stanje: dober (rabljeno), Leto izdelave: 2000, Težki stružnica ERNAULT SOMUA P72 s tremi vodili premer nad ležiščem 2200 mm premer nad vozičkom 2000 mm hitrost 1,5 do 3000 obr/min - 75 KM Lsdexq D Tyopfx Aacehc teža stroja 39 t dovoljeno breme 16 t stroj si je mogoče ogledati v delovanju

Stanje: rabljeno, Leto izdelave: 2005, The Sakurai 466 SIP, year of manufacture 2005, carries serial number HF113105 and is a four-colour offset printing press with a maximum sheet size of 470 x 660 mm and a total output of 25 million impressions. The machine is currently in operation at a print shop in Germany and is equipped with the DTC Delivery Top Console featuring a touchscreen and complete remote control capabilities. It includes advanced automation systems such as SIS (Sakurai Interactive System) for print job preparation, SAS (Sakurai Auto Set) for paper size and thickness adjustment, and SPC (semi-automatic plate changing), as well as a plate travel register system and a tension register for precise alignment. The machine is fitted with automatic washing systems for the blanket cylinders and ink rollers, an Olivermatic dampening unit, and a Baldwin refrigeration and Bal Control system to ensure consistent print quality. The feeder features a suction belt feed table with electronic double sheet and side lay detectors, while the chrome-coated impression cylinders provide increased durability and performance. Additionally, the equipment includes a perfecting unit for 4/0 or 2/2 printing with full automation, medium-pile delivery, and a powder spray system. Lsdpfxoxa Eame Aacjhc The scope of delivery for the press includes a plate punch, a compressor, tools, and manuals. This makes the Sakurai 466 SIP a comprehensive and well-equipped solution for high-quality and efficient offset printing production. Format: 470 x 660 mm Equipment: - DTC Console (Sakurai Delivery Top Console) with touchscreen. Full remote control: - SIS (Sakurai Inter Active System) for make-ready - Plate travel register system - SAS (Sakurai Auto Set) for paper size and thickness - SPC (Semi-automatic plate change) - Tension register - Automatic washing systems: blanket cylinders & ink rollers - Olivermatic dampening system - Baldwin refrigeration system & Bal Control - Feeder with suction belt feed table - Electronic double sheet and side lay detector - Chrome-plated impression cylinders - Perfecting 4/0 - 2/2 (fully automatic) - Medium-pile delivery - Powder spray Including: plate punch, compressor, tools, and manuals

Stanje: rabljeno, TECHNIČNI PODATKI MIZA - Velikost mize: 3100/800 [mm] - Najv. obremenitev mize: 7000 [kg] - Hodi osi X/Y/Z: 3000/1000/1200 [mm] - Hitrost hitrih pomikov (X/Y/Z): 15000/15000/15000 [mm/min] REZKALNA GLAVA Ročna glava REZKALNO VRETENO - Vpenjanje orodja: ISO50 - Hitrost vrtenja vretena: 4000 [obr/min] - Moč pogona vretena: 27 [kW] MENJEVALEC ORODIJ - Tip menjalca: Parapluie - Število orodij v zalogi: 24 TEŽA IN DIMENZIJE - Potrebni prostor: 7913/5043 [mm] - Višina stroja: 3440 [mm] - Teža stroja: 13410 [kg] Ljdpfx Aaew Tnhbjcjhc ELEKTRIČNO NAPAJANJE - Napetost: 400 [V] - Skupna moč pogona: 38 [kW] DELAVNI ČAS - Ure pod napetostjo: 24689 [ur] - Delovne ure: 23809 [ur] - Ure vretena: 7658 [ur] OPREMA - Krmiljenje: Heidenhain iTNC530 - Elektronski ročni volan - Vmesnik: RS232/RJ45/USB - Teach-in programiranje - Rezervoar za hladilno tekočino - Držalo za orodje