CNC stružno-rezkalni center - vertikalni

EMAG EMAG VTC 250

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 10.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 3.000 mm, - CNC control Heidenhain TNC 415B - Controlled 2-axis NC milling head, 2.5° - Coolant system The machine is sold without the platen table. Accessories: Approx. 20 tool holders DIN 2080 with drawbars DIN 69872 Various spare parts such as bevel gears for the milling head and ball screw for X-axis. Lrodpfx Aewrzkzocaer Technical Data: X-travel (longitudinal): 10,000 mm Y-travel (cross): 1,500 mm Z-travel (vertical): 3,000 mm Spindle taper: SK50 Spindle speed (2-speed): 35–3,000 rpm Feed rate: 6–10,000 mm/min Rapid traverse X, Y, Z: 10, 15, 10 m/min Main motor power 100% duty cycle: 37 kW Machine weight approx.: 39,300 kg Technical data, accessories and machine description are not binding.

Stanje: rabljeno, Leto izdelave: 1973, Spindle diameter: 130 mm X travel: 3,000 mm Y travel: 2,000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Boring spindle diameter: 130 mm Spindle taper: SK 50 Ljdpfx Aot Hwt Sjcajrr Working area: X – Column longitudinal travel: 3,000 mm Y – Spindle housing vertical travel: 2,000 mm Z – Spindle stroke: 1,000 mm Table size (lower): 3,300 x 2,400 mm Load capacity per m²: 10 t/m² Mounted table approx.: xx,000 mm Min./Max. position of working spindle above table: 770 / 2,770 mm Feed rate: 0.9 – 2,000 mm/min Rapid traverse for spindle headstock and column: 5,000 mm Quill feed: 0.5 – 1,200 mm/min Spindle speed range, partially infinitely variable: 4.5 – 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: • Heidenhain 3-axis digital readout, hardened guideways, ball screws • Infinitely variable spindle speeds and feeds, individually motorized feed drives • Operator’s traveling platform, pendulum panel control, manual hand panel, platform • Hydrostatic column displacement • Planed clamping plate 3,200 x 2,500 mm with T-slots, auxiliary table approx. 1,400 x 2,600 x 900 mm (H), one side face machined • Hydraulic clamping for column/carriage, motorized tool clamping • Extensive accessories including tool holders with and without tools • Separate chip extraction system, clamping aids, 1 clamping angle plate and plates, and much more

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.500 mm, skupna dolžina: 4.500 mm, skupna višina: 3.200 mm, Offered is a double-spindle pick-up lathe EMAG VSC 250 DUO. There are 2 almost identical machines of this type available. Each machine is equipped with 2 independent work spindles and 2 EMAG turrets. The machine is capable of either machining 2 identical workpieces with the same operation simultaneously, or producing one workpiece in two consecutive machining steps. The VSC 250 DUO will be completely overhauled before delivery and will receive a control system upgrade to Siemens Sinumerik ONE. If required, the machine can be equipped with further peripherals (chip conveyor, coolant system, external automation, etc.). CONTROL Siemens Sinumerik One TECHNICAL DATA Workpiece diameter: max. 250 mm Workpiece height: max. 150 mm Chuck diameter: 250/315 mm Swing diameter: 350 mm X-axis travel: 745 mm Z-axis travel: 300 mm TOOL CARRIERS Work area 1: Lrodpfxjr Nc Ufo Acajr 1x EMAG disc turret, 12x VDI 50 stations, no driven tools Work area 2: 1x EMAG disc turret, 12x VDI 50 stations, with driven tools Price, delivery time, and machine configuration upon request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 2.500 mm, hitro pomikanje X-os: 35.000 m/min, hitri pomik os Y: 40.000 m/min, hitri pomik na osi Z: 40.000 m/min, skupna širina: 5.800 mm, skupna višina: 4.500 mm, skupna dolžina: 13.500 mm, dolžina mize: 10.000 mm, širina mize: 1.250 mm, Travelling column – high performance, precision, and metal removal capacity Linear RAM guide combined with HDS hydrostatic guidance ACD2 milling head with 5,000 rpm and 1,400 Nm torque Aitek ATC chain magazine with 60 positions, L = 400 and Ø 250, max. 35 kg Filtration with high-pressure coolant (IKZ) 15 bar Chip conveyor BLUM 3D touch probe Wide bed, linear guided in X-axis, traverse path W = 930 mm Rotary table drive prepared in control cabinet X-axis: 8,000 mm Y-axis: 1,300 mm Z-axis: 2,500 mm Table length: 10,000 mm Table width: 1,250 mm Spindle power: 40 kW Spindle speed: 5,000 rpm Tool holder: 40 ISO/Bt/Mk X-axis feed: 35,000 mm/min Ledsyr Dmdepfx Acaorr Y-axis feed: 40,000 mm/min Z-axis feed: 40,000 mm/min Milling head auto-index: 0.001 x 0.001 degrees Operating hours: 3,800 h Length: 13,500 mm Width: 5,800 mm Height: 4,500 mm Weight: 45,000 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, no representation or contractual conditions are implied. We recommend verifying all critical details.

Leto izdelave: 1995, stanje: rabljeno, številka stroja/vozila: 18891, Tractive force: 10 t. Lift: 1000 mm Lredpfsbrcmksx Acasr 3 clearing stations With chip conveyor + platform for above-floor installation and safety door.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Offered is a double-spindle pick-up lathe EMAG VSC 500 DUO. The machine is equipped with 2 independent work spindles and 2 EMAG turrets. The machine allows for either simultaneous machining of 2 identical workpieces with the same operation, or sequential machining of one workpiece in two consecutive processes. Depending on requirements, the machine can be equipped with additional peripherals (chip conveyor, coolant system, external automation, etc.). CONTROL SYSTEM Siemens 840 Dsl TECHNICAL DATA Workpiece diameter: max. 440 mm Workpiece height: max. 250 mm Chuck diameter: 450 mm Swing diameter: 550 mm X-axis travel: 925 mm Z-axis travel: 400 mm TOOL CARRIERS 2x EMAG disc turrets, 12x CDI 68, with driven tools Lrodet Du Tdjpfx Acaer Price, delivery time, and machine configuration upon request.

Stanje: rabljeno, Leto izdelave: 1999, Tlak 130 t Dolžina upogibanja 3550 mm Razdalja med stebri 3060 mm Vgradna višina 510 mm Krmiljenje Cybelec DNC 80 Izsek 320 mm Hod 250 mm Lrodovxwqfepfx Acajr Delovna višina 900 mm Teža stroja cca 12000 kg Prostorske zahteve cca 4,05x2,1x2,85 m Krmiljenje Cybelec DNC 80 Osi Y1; Y2; X; R Premik matrice z ročnim kolescem 4 omejitveni prsti Hidravlično vpenjanje zgornjega orodja WILA Hidravlično vpenjanje matrice sistem Amada 2 podporni roki Varnostno dvoročno/pedalno upravljanje Različni zgornji in spodnji orodji

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, leto zadnje generalne obnove: 2023, General Description: Year of Manufacture: 2001/2023 Manufacturer: Emag Machine Type: VL3 Technical Specifications: Control: Fanuc 21i-T Swing Diameter: approx. 210 mm Maximum Spindle Speed: 6,500 rpm Turret: VDI 40 mm, 12 stations The machine is not equipped with live tooling. Hinged belt chip conveyor Spindle Mount: Gr. 5 Continuous parts conveyor Machine weight: approx. 5.5 t The following overhaul work was carried out in 2023: - Machine was completely disassembled, cleaned, and repainted - Main spindle bearings replaced - Guides and guide shoes on X and Z axes replaced - Ball screws on X and Z axes replaced - New central lubrication unit and hoses installed - Hydraulic unit checked and serviced; drive coupling between motor and pump replaced - Cooling unit checked and serviced; temperature difference controller replaced - Clamping cylinder bearings replaced and resealed - A-axis gearbox bearings replaced and coupling between motor and gearbox replaced - Electrical cabinet cleaned - Operating panel replaced - New monitor - New internal lighting - Turret disassembled, wear parts checked, cleaned and resealed - Turret encoder and encoder wheel cleaned Lsdpotpu Szofx Acasrr - Linear measuring systems on X and Z axes disassembled and cleaned - Springs at pickup station replaced - X and Z axis motors checked for bearing damage - Work door windows replaced - Chip conveyor completely disassembled, bearings replaced, cleaned, and repainted - Various small parts replaced as standard The product has been described by us with the utmost care. This description is non-binding and should be verified during inspection.

Leto izdelave: 1980, stanje: dober (rabljeno), Bandwidth: max. 1,650 mm Lrjdpfxogrylqj Acaer Band thickness: max. 3 mm Knife shaft diameter: 165 mm Speed: max. 150 m/min

Stanje: rabljeno, Leto izdelave: 1965, Dimensions (length/width/height): 10,460 × 5,715 × 5,537 mm Horizontal spindle head adjustment: 3,160 mm Vertical spindle head adjustment: 1,000 mm Milling length: 2,250 mm Machine weight approx.: 76,660 kg Ledpfxouh E Tbe Acaerr