Procesni center

Elumatec SBZ 150

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1500050285, potovalna razdalja osi X: 7.800 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 630 mm, največja hitrost vretena: 24.000 obr/min, število mest v zalogovniku orodij: 14, Oddanie oferty zobowiązuje do terminowego odbioru w dniu 23.12.2025! DANE TECHNICZNE Przesuw w osi X: 7.800 mm Przesuw w osi Y: 1.000 mm Przesuw w osi Z: 630 mm Posuw szybki oś X: 70 m/min Posuw szybki oś Y: 40 m/min Posuw szybki oś Z: 40 m/min Długość obrabianego elementu (max.): 7.300 mm Prędkość obrotowa wrzeciona (max.): 24.000 obr./min Gtsdpfx Aexx Uf Njfqet Moc silnika wrzeciona: 15.000 W Liczba wrzecion: 1 Liczba miejsc w magazynie narzędzi: 14 Średnica narzędzi: 100 mm DANE MASZYNY Napięcie zasilające: 400 V Rodzaj prądu wejściowego: prąd przemienny (AC) WYPOSAŻENIE Dokumentacja/instrukcja obsługi Magazyn może być wyposażony w dziewięć narzędzi standardowych, pięć narzędzi specjalnych i jedną tarczę piły Dziesięć urządzeń mocujących Dwie oddzielne strefy robocze do pracy wahadłowej Wyświetlacz kolorowy 15" Stacja dyskietek System operacyjny DOS

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1500050123, največja hitrost vrtenja: 18.000 obr/min, delovna dolžina: 12.000 mm, Brez minimalne cene – zagotovoljena prodaja najvišji ponudbi! Gtodpfoxnz Ivjx Afqst TEHNIČNI PODATKI Največje število obratov: 18.000 min⁻¹ Obdelovalna dolžina: 12 m Pnevmatske vpenjalne glave: 20 kosov PODROBNOSTI O STROJU Električni podatki Napetost: 400 V Faze: 3 ~ Frekvenca: 50 Hz Poraba toka: 76 A Delovni tlak: pribl. 8 barov OPREMA Samodejna menjava orodja Kotna enota

Leto izdelave: 2001, Stanje: rabljeno, Pictures coming soon – machine currently undergoing refurbishment Technical Data: - X-axis travel: 7,300 mm Gtodpfx Afjt Ea Tfjqjt - Y-axis travel: 1,000 mm - Z-axis travel: 650 mm - A-axis swivel angle: 0–90°, freely programmable - C-axis swivel angle: 0–355°, freely programmable - Max. machining length without end-face machining: 7,300 mm - Max. machining length with end-face machining: 6,980 mm - Tool changer with 10 positions and a saw blade holder - 9 material clamps - Tool holder: SK30 - 2-layer machining

Leto izdelave: 2005, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, elumatec SBZ150 Profile Machining Center 6.0 m 5-axis control. Efficient machining of aluminum and steel profiles Working length: 6,000 mm Description: Gedpfx Aow A Rv Iefqstt Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the machining unit along the X-axis; Low-wear direct drive; Automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Rigid machine bed for working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, of which 3 axes are trajectory controlled; Highly dynamic three-phase servo drives with resolver and digital servo controller; Swivel angle of A and C axes freely programmable; With color monitor and floppy disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connectivity; Barcode scanner, Label printer, etc. Integrated network card 10/100 MBit, RJ 45 connection (network connection by customer's administrator) Analog modem (customer must provide analog phone line) Technical data: Travel range X-axis: max 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90°, freely programmable Swivel angle C-axis: 0-355°, freely programmable For further details on milling area, see drawing no. 150 05 17 08 Max. machining length for face machining, left+right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100-22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: max. 100 mm Saw blade diameter: 400 mm Tool length: max. 150 mm from reference taper dimension Included accessories: Automatic tool changer (without tool holders) Dual-circuit clamping system with 2 pneumatically retractable material stops Automatic clamp detection and positioning 8 horizontal pneumatic material clamping units Tool preset gauge Front light barrier Saw blade DM400 with arbor Angle milling head Important: The profile machining center is equipped as standard with front light barriers. Any required lateral and rear safeguarding must be provided by the customer or please inquire about our safety fence options. Incl. Angle milling head for underside machining

Leto izdelave: 2000, Stanje: potreben popravila (rabljeno), Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 1500050136, Technical specifications: - X-axis travel: 7300mm - Y-axis travel: 1000mm Gedpfx Aev Avg Hefqott - Z-axis travel: 650mm - A-axis swivel angle: 0-90°, freely programmable - C-axis swivel angle: 0-355°, freely programmable - Max. machining length without end-face machining: 7300mm - Max. machining length with end-face machining: 6980mm - Tool changer with 10 stations plus a saw blade holder - 9 material clamps - Tool holder: SK30 - 2-level machining