Dvojna kotna žaga

Elumatec DG 104

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, Ponujamo pripravljeno za uporabo dvoglavo potezno žago Elumatec DG 104, letnik 1995. Stroj je povsem delujoč. Dolžina 6 m, 3 osi. Proizvajalec: Elumatec Model: DG 104 Codpfjy Hpfvex Ahxogt Letnik izdelave: 1995 Tip stroja: dvoglava potezna žaga Za dodatna vprašanja ali informacije nam pišite ali nas pokličite.

Leto izdelave: 2005, obratovalne ure: 900 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Rezkalna žaga GMM - Lexta 36 (4 osi) Večnamenska žaga za marmor, granit in kamen, ki zagotavlja visoko natančnost in enostavno uporabo. Značilnosti: - 4 osi Cgedpfx Ahjx A A Nwsxot - Miza: 3540x1850 mm - Disk: premer 800 mm - Zanesljiv in enostaven za uporabo stroj

Stanje: rabljeno, Leto izdelave: 1987, Dolžina reza 4500 mm Žagine liste so nagibni in rotacijski Stroj je bil revidiran leta 2019 Na voljo od maja 2026 Prosto naloženo na tovornjak Cjdjymx Ewjpfx Ahxsgt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, obratovalne ure: 193 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 7.200 mm, pomik osi Y: 480 mm, pomik po osi Z: 340 mm, največja širina rezanja: 335 mm, dolžina obdelovanca (maks.): 6.000 mm, največja hitrost rezkalne vretena: 6.000 obr/min, dolžina odseka (maks.): 6.000 mm, TECHNICAL DETAILS – Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control system: eluCAM graphical interface, Windows XP operating environment Workstations: 2 independently operating stations Revolver tool changer: 8 tools, servo-driven Tool holder: BT 30 Disc cutter diameter: 180 mm Tool length: 150 mm (measured from holder interface) Cgodpfjwprmzox Ahxot Travel Paths X-axis travel: 7,200 mm (without end-face machining), 7,080 mm (with end-face machining) Y-axis travel: 480 mm Z-axis travel: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y/Z-axes: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min Electrical connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT - Two independent workstations with light curtain and camera system - Fixed angular milling head for 2 tools, ER20A, up to 18,000 rpm - Swivel angular milling head 4 × 90°, ER20, up to 22,000 rpm - Non-swiveling angular milling head for steel, ER20A, 1,554 rpm - Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts - Carbide-tipped saw blade Z=100, D=300 mm, kerf 3.2 mm - Tool holder i=1:3.86 for 18,000 rpm, ER25 - Cooling/lubrication unit for steel machining - Disc milling cutter holder BT30, D=16 mm - Disc milling cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL DETAILS – Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable to 90° and 45° (interior); intermediate angles and acute 22.5° adjustable manually with digital display Cutting angle (tilt): pneumatically adjustable to 90° and 45° (interior) Sawing direction: saw blades move from bottom to top Control System Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic clamping Operating system: Windows Saw Unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 hp) Saw blade cooling: included Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electrical connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT - Automatically closing safety covers - Electronic positioning of heads with +/- 0.1 mm/m accuracy - Digital angle display for manually adjustable special angles - Pneumatically adjustable saw blade rotation and tilt angles - Operation via Windows control system with 8.4" display and handwheel - Saw blade cooling system included - Saw unit with bottom feed for optimal cutting force

Stanje: novo, Leto izdelave: 2023, stiskalna sila: 120 t, skupna dolžina: 3.000 mm, skupna širina: 1.300 mm, obratovalna temperatura: 120 °C, premer cilindra: 85 mm, širina odpiranja: 400 mm,

Leto izdelave: 1985, stanje: dober (rabljeno), Offer 22556 Technical Data: - Saw blade diameter: 420 mm - Saw blade bore: 30 mm - Max. cutting length: 3000 mm - Minimum cutting length at 90° and 45°: 335 mm - Cutting range: see attached diagram - Manual swivel range inward: 90° - 22.5° - Manual tilt range inward: 90° - 45° - Saw blade speed: 2800 rpm - Drive: 380 V / 2 x 4000 Watt - Compressed air connection: 7 bar - Air consumption per cycle approx.: 64 l - Space requirements approx.: W 4500 x H 1950 x D 1600 mm Cgsdpfxeimdlre Ahxet - Weight approx.: 1400 kg - With: - Adjustable cutting length with positioning control - Positioning control renewed ca. 2002 by WOLFF - Saw unit can be swiveled and tilted for tall and wide profiles - Also suitable for compound/miter cuts

Stanje: dober (rabljeno), Leto izdelave: 2009, Elumatec SBZ 140 Long version: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Light barriers Automatic clamp detection Central lubrication Cooling spray system Chip trolley Conditioning unit Max. spindle speed: 24,000 rpm Tool holder: HSK-63F mount, 8-position automatic tool changer. Max. milling diameter: 80 mm Max. saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining centre (axes: X, Y, Z + A). It is designed for aluminium and thin-walled steel profiles. 4-axis CNC machining centre (X/Y/Z + tilting/rotating axis A) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis travel speed: X-axis up to approx. 65 m/min, Y and Z axes up to approx. 60 m/min (depending on configuration) Csdpfx Ahjx E Ahzsxogt Control: 4-axis CNC control system with PC operation, colour display, USB & network. Software: eluCam. Automatic material clamps, automatic positioning via locating pins Pendulum/shuttle operation (two work zones) improves production throughput. Besides milling and drilling, also tapping, sawing, profile machining—all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The displayed price is exclusive of VAT (VAT deductible for businesses).

Stanje: rabljeno, številka stroja/vozila: 008167, Delovno območje os X: 6000 mm Delovno območje os Y: 1750 mm Delovna površina: Z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 12 kW Cgsdpfex A Hczjx Ahxot Število krmiljenih osi: 5 osi Število vrtalnih vreten: 30 Število mest za orodja: 72

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: HOLZMA Model: OPT HPP 350/43/43/X Cgodsxwwfvspfx Ahxjt Tip stroja: Žarkovna žaga Leto izdelave: 2005 Obratovalno stanje: še priklopljen Dolžina reza: 4.300 mm Hod potiskača: 4.250 mm Število prijemal: 6 Maksimalna hitrost pomika: 130 m/min Neprestano nastavljiv pomik Izstop žaginega lista: 80 mm Maksimalni premer žaginega lista: 350 mm Moč glavnega motorja: 9 kW Predrezila: Da Stran zadrževalnika: desna stran Krmiljenje: HOMAG POWER CONTROL, HOLZMA CADMATIC 4.0 Oznaka skladnosti: CE Teža: 5.000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, The Vertical Machining Centre enables drilling, milling, cutting, and notching operations within the technical parameters specified in the manual, on workpieces made of: plastic, PVC, ABS, methacrylate, polycarbonate, thermoplastic, composite, and aluminium materials. The vertical worktable allows for easy loading and unloading of processed parts and minimises the maximum dimensions of the machine to the essential minimum. Tool changing using a 10-position side-mounted tool magazine enables a wide range of operations without the need to remove the workpiece from the table. Maximum workpiece dimensions: Cgsdpfxjmzbr So Ahxst X = 4200 mm Y = 1600 mm Z = 20 mm Rapid traverse speed (m/min): X = 30 Y = 30 Z = 15 Milling head units T1 and T2: Spindle power (kW): 3.3 Spindle speed (rpm): max 18,000 Electric spindle with clamp – ER32 Drilling head unit T3: Spindle motor power (W): 370 Spindle speed (rpm): max 2,800