CNC palica-obdelovalni center

ELUMATEC 122/73

Leto izdelave: 2018, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Machine Information: The machine comes from a metalworking company specializing in the production of aluminium windows, doors, and façades. It was purchased in 2018 to relieve several 5-axis machines, specifically for aluminium entrance door manufacturing. Due to internal restructuring, the machine was no longer used and became available. The machine has been carefully cleaned, inspected, and serviced on the premises of Weyand. All worn components have been replaced. Programming can be done either directly at the machine (eluCam) or via the included office software eluCad. The software option package for data import of ECW, NCW, and V6 files (e.g., LogiKal or Wictop) is also included. Machine Description: - Efficient machining of aluminium, plastic, and steel profiles - A-axis infinitely adjustable from -120° to +120° - Linear guides for clamp shifting - Enhanced machining results through intelligent control technology - Rapid positioning of the machining unit (up to 120 m/min) via dynamic servo drives - Thread cutting without floating tap holder - Automatic clamp recognition and positioning - Automatic tool changer - 4-axis control - No referencing run required for main axes thanks to absolute encoder systems Djdpfxjyr H Abj Altsuw - Collision avoidance via automatic clamp detection and positioning - Power torque milling motor with closed-loop speed control for short spindle acceleration and braking times - Certified, drive-integrated safety functions Low power consumption due to intelligent control technology. Energy recovery through common DC-link coupling of axis drives with feedback and buffering of braking energy. Green-Line cooling unit for control cabinet with reduced energy consumption - Windows operating system - 15" flat panel display, USB ports and network connection - Simple and user-friendly programming via eluCam at the operator terminal, even during machining operations - Remote maintenance via TCP/IP with available internet connection Equipment: - Operator safety enclosure - Four horizontal pneumatic clamping systems - Material stop left - Minimal quantity lubrication system - Handheld control device - Depth gauge Technical Data: - Max. machining length without end-face operations: 4,050 mm - X-axis travel: 4,176 mm, Vmax 120 m/min - Y-axis travel: 1,040 mm, Vmax 60 m/min - Z-axis travel: 540 mm, Vmax 30 m/min - Machining directions 3+2 (top, rear, front) - Positioning accuracy: +/- 0.1 mm - Milling spindle speed: max. 20,000 rpm - Milling spindle power: 7 kW, S1 (water-cooled) - Tool interface: HSK-F63 - Automatic tool change - Twelve tool positions in the automatic magazine - Max. disc milling cutter diameter: 120 mm - Max. tool length (from taper): 150 mm - Automatic clamp shifting - Basic clamp (with round guide) - Software: eluCam - Compressed air connection: >7 bar - Electrical connection: 400 V, 50 Hz, 22 A - Air consumption per minute (with spraying): approx. 185 l Accessories included (used): - Full enclosure SBZ122/7x (rear wall + roof) - Complete HSK-F63 d16 L=155 holder for disc milling cutter - Disc milling cutter D=92x6.0 mm, Z=14, d=16, carbide teeth - Right stop SBZ 122170171173 with second clamping circuit, for machining oversized parts - Various used tool holders and milling cutters - ESTA chip extraction system eluCad - License for connection to eluCad - eluCad data import package for ECW, NCW and V6 files

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Three small window and profile processing machines are available: 1) Urban WS 103 water slot router, year of manufacture: 2008. 2) Urban AKS 1105 single-head welding machine with new cylinder. Dedowwvwyjpfx Alteuw 3) Stegmaier AK 84 low threshold for outer frames, year of manufacture: 1984. Inspection on site is possible. Individual sale possible.

Leto izdelave: 2016, stanje: rabljeno, Proizvajalec: Emmegi S.p.A. Stroj: Čistilni stroj za PVC Model: Trimmer E Leto izdelave: 2016 CNC čistilni stroj za vogale okvirjev iz PVC, s 3 interpoliranimi osmi, v avtomatskem ciklu. Opremljen je z rezilom premera 300 mm, ki omogoča z različnimi delovnimi programi čiščenje zunanjih kotov različnih profilov. Teža: 600 kg Tlak zraka: 6 – 7 bar Motor: E48 63/2 Duedpsywu A Iofx Altjw Hitrost: 2850 1/min Moč: 3,5 kW Tok: 6 A Napajanje: 400/3 V Frekvenca: 50 Hz

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, It is important to note that a total of two welding machines and two CNC corner cleaning machines are available, resulting in two complete production lines. The machines are operational and still in daily use. CE conformity: Yes (CE marking on the machine) Power supply: 400 V Frequency: 50 Hz Power connection: 25 A Main switch: Industrial main switch with safety interlock Operating air pressure: 7 bar Main components: - 4 welding heads - Linear motion system - Profile clamping units - Welding plate system - Pneumatic pressing units - Electronic temperature control - Central control unit - Safety light curtain Operation: Profile clamping – inserting the heated welding plate – PVC melting – generating welding pressure – welding cooling – frame removal The system operates semi-automatically/automatically. Included: - Automatic head positioning - Pneumatic clamping system - Digital temperature control - PLC control - Control panel and industrial PC Control system: Industrial PC control Dsdpfx Aoyyavrjltouw Safety system: - Light curtain - Emergency stop button - Safety covers - CE conformity Still under power in Hungary, the system can be dismantled and delivered around June.

Leto izdelave: 2014, obratovalne ure: 9.544 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1400040735, Maksimalna dužina obrade: 7.720 mm bez obrade čeonih strana Maksimalna dužina obrade: 7.600 mm sa obradom čeonih strana X-os hod: 7.720 mm, maksimalni posmak 63 m/min Y-os hod: 845 mm, maksimalni posmak 60 m/min Z-os hod: 620 mm, posmak 60 m/min A-os opseg nagiba: -90° 0° +90° Smer obrade: odozgo/napred/nazad/(levo/desno) Poziciona tačnost: +/- 0,1 mm Snaga vretena: 11 kW; S1 vodeno hlađeno Obrtaji vretena: maks. 24.000 o/min Prihvat alata: HSK 63 F Menjač alata: automatski Pozicije za alat u magacinu: 8 mesta Automatski menjač alata za ugaonu glavu: 1 mesto Prečnik disk freze: 120 mm Dužina alata (od konusa): 150 mm Automatsko pomeranje stegača Stegači: 8 komada Operativni sistem: Windows Proizvodni softver: EluSoft, EluCAM Priključak za komprimovani vazduh: 7 bara Električni priključak: 400 V, 3 faze, 50 Hz, 25 A Potrošnja vazduha po minutu: cca 185 l sa prskanjem Potrebna površina (D x Š x V): 11.240 mm x 3.400 mm x 2.950 mm Dedpfsza D Scsx Altjuw Težina: 8.200 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, številka stroja/vozila: 390701, Naprodaj je dvoglavni varilni stroj URBAN model AKS 3900. Stroj je popolnoma delujoč. Uporabljen v enosmenski proizvodnji. Letnik izdelave 2021. Račun o nakupu iz leta 2022. Dusdpfx Aljzd Ra Tstew

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, moč: 2,2 kW (2,99 KM), vhodna napetost: 380 V, vrsta vhodnega toka: trifazni, največja višina reza: 373 mm, največja širina rezanja: 218 mm, premer žaginega lista: 600 mm, nastavitev nagiba žaginega lista: 135 °, vrsta nastavitve višine: električni, vrsta aktuacije: električni, največja hitrost vrtenja: 2.800 obr/min, vrtljajska hitrost (min.): 2.800 obr/min, skupna dolžina: 7.800 mm, skupna širina: 2.100 mm, skupna višina: 2.120 mm, skupna masa: 2.400 kg, višina mize: 70 mm, Oprema: CE označba, dokumentacija / priročnik, zaščitni pokrov žaginega lista, Rezila Ø 600 mm, Dusdpfxjzh E Umo Altsw Digitalni nagib glav, Rezalni koti od 20° do 135° Odprtina 5 m, Moč motorjev: 2,2 kW, Z dovednim transporterjem na premični glavi: 2500 mm, Zložljiva sredinska podpora 4 vodoravne in 2 navpične vpenjalke, Programska oprema FSTCUT4 Leto 2020

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), Na voljo je Stürtz horizontalni dvoglavi stroj za obrezovanje, namenjen sočasni obdelavi dveh 90° notranjih in zunanjih kotov na zvarjenih PVC oknih. Število pozicij za orodja zgoraj/spodaj: 8/8, min. dimenzija izdelka X/Y brez obdelave prečke: 320 mm/370 mm, min. dimenzija izdelka X/Y z obdelavo prečke: 640 mm/370 mm, min. notranja mera okvirja X/Y: 180 mm/180 mm, maks. dimenzija okvirja X/Y: 4000 mm/3000 mm, obseg gradbene globine: 30 mm-135 mm, obseg vidne širine profila: 25 mm-120 mm, oprema: 4 agregati za vrtanje tesnilnih utorov/4 merilniki notranjih vogalov/4 rezila za utor sence/2 enoti za zunanji obris. Vključuje razno dodatno opremo in orodja. Dokumentacija je na voljo. Možen je ogled na lokaciji. Duodpjyn N Apsfx Altow

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), Na voljo je celotna linija za proizvodnjo oken Stürtz. 1) Stroj za obdelavo profilov Stürtz STBAZ-IPT-4000-V za okvirje, krila in prečke, letnik 2004. 2) Štiriglava varilna linija Stürtz SE HSM-25/26-Compact-Plus za krila, letnik 2006. 3) CNC čistilni stroj Stürtz 4MC Motion Control za linijo kril, letnik 2011. 4) Obratna postaja Stürtz WST-25-CNC pri čistilcu kril (3), letnik 2011. 5) Horizontalna štiriglava varilna linija Stürtz SE-HSM-40/26-Compact-Plus za okvirje, letnik 2006. 6) CNC čistilni stroj Stürtz 2MC Motion Control v liniji za okvirje, letnik 2008. 7) Obratna postaja Stürtz WST-30 v liniji za okvirje, letnik 2008. 8) Ščetkasto dvižno mizo Stürtz SE-BHT-3000 kot omejevalo in transportno mizo pred omejevalom za krila, letnik 2008. 9) Stroj za privijanje okovja kril Stürtz FBS-1 v pretočnem načinu, letnik 2008. 10) Razdelilni in skladiščni voziček Stürtz SE-VW-FT v sistemu za začasno skladiščenje kril, letnik 2008. Gre za popolno proizvodno linijo za izdelavo oken. Na voljo je dokumentacija. Ogled na lokaciji je možen. Dodpfx Aozcyqmoltouw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, skupna masa: 2.600 kg, This 3-axis SCHÜCO PDG E CUT was manufactured in 2009. It features a maximum blade diameter of 600 mm and operates at a motor speed of 2,410 rpm. The machine is equipped with a discharge conveyor and an extraction system for efficient operation. If you are looking for high-quality cutting performance, you should consider the SCHÜCO PDG E CUT double mitre saw we have for sale. Contact us for further details. • Motor speed: 2,410 rpm • Max. saw blade diameter: 600 mm • Motor type: M 100, 4 kW • Electrical connection: 3~ 400 V / 50 Hz / 7.7 A • Processable material: Aluminium • Height [mm]: 1,870 • Depth [mm]: 2,100 Dodpfjyv E Edox Alteuw • Compressed air: 7 bar • Coverage ratio: 53 • Consumption unit: NL/cycle • Mounting hole: 32 mm • Control voltage type: DC • Width [mm]: 7,125 • Supply voltage (machine): 400 V • Voltage type (machine): AC • Frequency (machine): 50 • Motor power: 2 x 2.2 kW • Control voltage: 24 V • Max. cutting length: 5,000 mm • Min. cutting length: 350 mm • Min. cutting length with software: 270 mm • Configuration: 5 m • Angle adjustment: via servo motors • Outer tilting angle: up to 20° • Inner tilt angle: up to 45° Additional equipment • Discharge conveyor belt • Extraction unit, make: Emmegi