Stroj za točkovno varjenje

ElmaTech GmbH MIDIspot Vision QSVM 9000/12000T

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, ElmaTech MIDISpot Vision QSVM 9000/12000T + ELMA Vision CM – MF Spot Welding System Manufacturer: ElmaTech GmbH System consists of: MF Inverter: MIDISpot Vision QSVM 9000/12000T MF Transformer Handheld Gun: ELMA Vision CM Serial numbers: 9420357 IMA 9420363 IMA Standard: EN500063 Condition: Used, technically flawless Description For sale is a complete MF spot welding system by ElmaTech, comprising a high-performance medium-frequency inverter (QSVM 9000/12000T) and the corresponding MF transformer handheld welding gun ELMA Vision CM. This system is designed for industrial resistance spot welding applications. Typical fields of use include: - Vehicle manufacturing - Automotive suppliers - Metal processing - Robotic welding cells (e.g. KUKA, ABB, FANUC) - Manual spot welding stations Thanks to medium-frequency technology (10 kHz), the system offers high energy efficiency, rapid control response, and high weld quality. Technical Data – MF Inverter QSVM 9000/12000T Output U₀: 560 V Frequency: 10 kHz Current range: 0 – 200 A Duty Cycle: 5% Input Voltage: 3~ / 400 V Frequency: 50/60 Hz Power: 75 kVA Protection class: IP 21 Other specifications Insulation class: F Cooling type: WF (water cooling) Weight: 95 kg Technical Data – ELMA Vision CM (MF Transformer Handheld Gun) Output U₂₀: 12.5 V Current range: 0 – 15 kA Energy / I₂max: 15 kAs Input Uₙ: 560 V Frequency: 10 kHz Duty Cycle: 50% Power: 30 kVA Protection class: IP 21 Kwsdpfx Abox Au Tnobet Other specifications Weight: 35 kg Insulation class: F Cooling type: WF (water cooling)

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.200 mm, Schlatter MG900, širina 1.200 mm, s 4 x 100 kVA transformatorji, posodobljen nadzor s Siemens S7-300 PLC iz leta 2016. Mehansko popolnoma obnovljen in vsi kontrolni kabli novi. Ksdpevvf T Aofx Abbewt

Stanje: rabljeno, 4,000 linear metres of construction profiles, C-shape, galvanised Used goods, in good condition, see photos Length per piece: approx. 12 m Profile: 110 x 90 mm Material thickness: approx. 3 mm Negotiable price: €4.90/linear metre net ex stock Goods in stock. Transport and installation available upon request. Inspection possible at any time by appointment. Further information available on request. Kwedpfx Abour Ikrobst Over 5,000 linear metres of pallet racking from various manufacturers constantly in stock. (Subject to changes and errors in technical data, specifications and prices. Intermediate sale reserved! See our general terms and conditions. All prices excl. VAT ex stock.)

Stanje: generalkompletno obnovljen (rabljeno), Rated power at 50% duty cycle: 63 kVA Short-circuit current: 31 kA Electrode force: max. 730 daN Weight: approx. 98 kg --- with 800 mm electrode arms --- Welding control B200/MPS10 5-cycle, 8-program --- Spring balancer optional --- Warranty: 6 months --- Training and commissioning available on request --- Spot welding electrodes and spare parts available from stock --- Kwjdpfx Abjtq E Ahsbot Further information on our website

Stanje: novo, Leto izdelave: 2025, skupna višina: 4.000 mm, skupna dolžina: 7.000 mm, skupna širina: 3.000 mm, trajanje garancije: 24 meseci, temperatura: 80 °C, potreba po zraku: 36.000 m³/h, vhodna napetost: 380 V, ogrevalna zmogljivost: 345 kW (469,07 KM), moč: 40 kW (54,38 KM), gorivo: utekočinjeni naftni plin (LPG), poraba energije: 40 kWh, izolacijski material: Mineralwolle, debelina izolacije: 50 mm, nazivna moč: 345 kW (469,07 KM), Oprema: osvetlitev, MAIN SPECIFICATION Our spray booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. All processes inside the booth are managed via a PLC system, ensuring consistent adherence to set values. OPERATING PRINCIPLES OF THE BOOTH Processes inside the booth are controlled via an operator panel, which manages the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn from outside, passed through front filters, and directed into the plenum chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) capture paint particles, and the air passes through final exhaust filters before being released. FLASH-OFF PROCESS After painting, the booth continues to run for approximately 15 minutes to extract residual solvents and thinners. During this phase, fresh air from outside continues to circulate within the booth. DRYING PROCESS In this phase, 80% of the air circulating through the booth is heated to 60°C and supplied into the booth through a distribution system. As approximately 20% of the solvent is released during drying, it is expelled together with this air. Industrial coatings are typically cured at 60°C, but booth temperature can be adjusted via the operator panel as needed. COOLING PROCESS After the 30-minute drying phase, the heating coil is deactivated from the operator panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels manage the functions and operation of all machinery and equipment inside the booth. The panel is made of durable galvanized sheet metal and steel sections and is fully enclosed to protect against dust and moisture. Electrical devices and control panel: • The control panel contains essential components such as circuit breakers, fuses, signal lamps, thermal relays, contactors, and connectors. Kwjdpswzmcbsfx Abbst • Heat-resistant cables are used for the command and control connections between the control panel and motors or other electrical equipment. • Electrical wiring is designed to allow for relocation of the booth if required. • Operating equipment uses 380 V 50 Hz, while control devices use 220 V. • The booth operating time can be monitored on the electronic panel for easy maintenance tracking. • Temperature and timer settings for flash-off, intermediate drying, and final drying can be easily programmed to the required values on the electronic control panel’s digital display. • Users can monitor and adjust drying times via the heating thermostat and timer relay.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1989, številka stroja/vozila: SI73, Technical Data: 1x Demag KBK 1 column-mounted slewing jib crane, rated load 250 kg Kwedpfx Ajwv N Ezjbbst Load capacity at full outreach: 250 kg / 0.25 t Height: approx. 2.83 m Underside of jib: approx. 2.3 m Outreach: 3 m Hook height: approx. 1.85 m Total weight: approx. 400 kg including anchor plate 71x71 cm Equipped with Demag PK chain hoist, 250 kg lifting capacity Including pins, cable trolley, trolley, end cap, etc. Slewing range: 300°, connection: 400 V / 16 A Crane is dismantled and available immediately Location: 75053 Gondelsheim More cranes available, capacities 80–5000 kg – please inquire See photos Shipping via freight carrier or collection by appointment only

Stanje: novo, Wisniowski Industrial Sliding Gate 6 x 2 m List Price €16,800 Brand: Wisniowski Description Kedeh I Nvbopfx Abbewt Clear opening approx. 600 cm Leaf length approx. 800 cm Leaf height approx. 200 cm Including light barrier and 1 transmitter Sliding direction from street side to the right, without galvanized base. Includes motor and keys Color: black Photos for reference Item condition: new Find more new and used items in our shop! International shipping costs on request!

Stanje: rabljeno, Détails techniques : Puissance électrique : 100 kVA Profondeur de col de cygne : 600 mm Entraxe des bras : 600 mm Commande : Bus de terrain programmable Bosch Ouverture des pinces réglable : 240 - 540 mm Interface : RS 485 Tension de soudage : 500 V Tension d’alimentation : 380 V Kjdpfxsu Nv Eae Abbowt Pression d’air : 6 bar Consommation d’eau de refroidissement : 14 l/min Poids de la machine env. : 770 kg Encombrement env. : 1,5 x 0,95 x 2,1 m SOUDAGE PAR POINTS – TRANSFORMATEUR DE SOUDAGE Application : Soudage par points, par bosses et en série 1 - 1000 Hz Force de l’électrode par vérin : 11 daN Redresseur moyenne fréquence PSI 6000 avec fonction de commande intégrée (alimentation secteur 50/60 Hz) Bras d’électrode Ø 35 mm Réglage du support d’électrode : 200 mm (manuel) Entraxe des bras min. 240 mm, max. 540 mm (réglage manuel) Commande par pupitre Rexroth IntraControl VCP05 et pédale Groupe frigorifique externe pour eau de refroidissement marque Rittal SK3320.609 Incl. électrodes de rechange (refroidies à l’eau)

Stanje: rabljeno, Moč . kVA Doseg . mm Pritisk varilne glave . kp Mere ca. 650 x 800 x 2050 mm Teža stroja ca. 140 kg Ta točkovni varilni stroj s najsodobnejšo inverter tehnologijo 125L omogoča varjenje visoko trdnostnih pločevin ter vseh drugih kovinskih pločevin. Večnamenski stroj z vodnim hlajenjem je idealen za vse intenzivne naloge pod težkimi obremenitvami. OPIS: - Varilni aparat za vse naloge točkovnega varjenja in poravnanja - Pnevmatska klešča z visoko napetostjo Pritisk na elektrodah: 550 N pri 7 bar s 100 mm elektrodnimi rokami - 2,5 m vodno hlajeni kabel za klešče in 3 m zračno hlajeni kabel za pištolo - Napajalni kabel 8 m - Teleskopska roka z izenačevalnikom - Pnevmatska klešča z daljinskim upravljanjem - 78 varilnih programov Kedpoxb Ef Sefx Abbjwt

Stanje: rabljeno, nazivna moč pri 50-odstotnem delovnem ciklu: 25 kVA, – Capacity: 25 kVA – Pneumatic – Timer – Clearance: 560 mm Kedpfxsvkklao Abbewt – Arms adjustable in both straight and angled positions – Lower arm height adjustable – 380V