Različni stroji

ELMA S130 H ELMASONIC

Stanje: kot nova (razstavni stroj), ATEX-CERTIFIED PUMP Oil-sealed rotary vane vacuum pump. Available in stock. Fully overhauled pump with warranty. Rated flow: 30 m³/h at 50Hz. Ultimate vacuum: 1x10^-3 mbar abs. Hfsdjftzgxspfx Adreh For any further questions, please contact us.

Leto izdelave: 1992, stanje: dober (rabljeno), številka stroja/vozila: 20281, Offer 23034 Technical specifications: - Max. grinding length approx.: 350 mm - Max. grinding width: 150 mm - Max. installation height with/without magnet: 150 / 210 mm - Grinding wheel stroke approx.: 200 mm - Clamping surface: 300 x 160 mm - Magnetic clamping plate: 250 x 150 mm - Grinding wheel dimensions approx.: 200 x 80 x 78 mm - Grinding wheel speed: 2800 rpm Hfedpfxsklxwke Adreh - Swivel range of grinding arm approx.: 180° - Manual arm clamping via clamping lever - Wet grinding system - Drive: 400 V / 1.85 kW - Required floor space approx.: W 850 x H 1650 x D 800 mm - Weight approx.: 350 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel VA 0.2 260 N/mm²) → Total connected load 3 kW → Tube feed-in length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display allows for easy and intuitive programming and operation of the machine. After the tube is inserted, it is fixed in place by the chuck in the carriage, ensuring precise positioning and permitting the production of dimensionally accurate geometries. Standard features also include a tube geometry check before the bending process: if the bending process is started at the wrong position, the machine will not release the bending operation—misoperation is prevented. Optional additional features increase comfort, boost output, and thus enhance the system’s efficiency. Data exchange with the optional TBS-3D pipe calculation software (PC version) is done via USB stick or network. Existing tube geometries can be imported using the software. Standard features: → Servo drive on bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Servo-driven feed → Servo-driven rotation → Three-jaw chuck for clamping the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping force → Programmable early mandrel retraction PLC control: → 10" colour touchscreen → ETH 10/100, X2X Link, 2x USB → Foot switch operation → Data transfer via LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly at the machine. After entering length and angle, the controller automatically calculates the feed values and bending angles. Hfodotr U Hljpfx Adreh Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Stanje: novo, Column drill, precise, quiet, and reliable. Manufactured according to strict safety standards. Precision spindle shaft with tempered Morse taper, machined base plate. Hfodeir Aihepfx Adreh Supplied with electronic speed variator. Rotating table + vice 350 x 250 mm. Drilling capacity in steel: R50 mm ø 22. Tapping capacity in steel: R50 mm M 14. Spindle taper: MT2 Spindle stroke: 90 mm. Spindle quill diameter: 52 mm. Column diameter: 98 mm. Distance from column to spindle center: 201 mm. PU belt drive Electronic speed variator (E). Spindle speed: 270 ÷ 4,200 RPM. Motor power: 0.75 kW / 220 V Single Phase. Dimensions (h x w x d): 1950 x 600 x 680 mm. Weight: 220 kg.

Stanje: zelo dobro (rabljeno), Rotary vane vacuum pump Hedpfohmkcnsx Adrjfh Manufacturer: Edwards Type: E1M275 Includes: oil filling Condition: very good (The pump is tested, cleaned, and receives a new service prior to delivery) Warranty: 3 months

Stanje: dober (rabljeno), Leto izdelave: 2009, Stroj bo prispel z robotom. 42.000 vrt/min Hodpoxfu S Njfx Adrsfh

Stanje: dober (rabljeno), 3 "GOODY" bench vises Hjdpjrai Akefx Adrefh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, največja hitrost vretena: 8.000 obr/min, število osi: 9, This 9-axis TRAUB TNL 32 Swiss-type lathe was manufactured in 2014. It features a TX8i-s control unit with a 64-bit RISC CNC/PLC processor, a TFT color display, and an electronic handwheel. The main spindle offers a 32-mm bar capacity, and the machine is equipped with a counter spindle featuring a C-axis. It includes an upper tool turret with double drive and a lower turret with nine tool holders. Consider the opportunity to purchase this TRAUB TNL 32 Swiss-type lathe. Contact us for more information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber optic PC; TFT color flat screen; electronic handwheel • Software/extensions included: Polyform (C-axis programming), Helical (3D Y-axis interpolation), thread cutting without compensating chuck, part-off tool breakage monitoring, part-off tool ejection monitoring, axis disabling, T-ATC • Main spindle: motor spindle with hollow clamping system; 32 mm bar/drill capacity; C-axis max. speed 8,000 rpm • Max. stroke: 305 mm (L version) / 127 mm (K version) • Counter spindle: partial hollow clamping, C-axis; cleaning unit mounted on lower tool turret • Upper tool turret: X/Y/Z/H/B axes; 10 tool holders; double drive Hedpfxox D Drco Adrofh • Lower tool turret: X/Y/Z/H axes; 9 tool holders; combined drive; separate counter spindle operation • Measurement/feedback: glass scales on X axes (upper and lower turret); encoder on C axis • Backworking: 8-position rear station with combined drive for up to 3 tools; ready for internal coolant feed • Clamping: clamping direction reversal device and counter clamping pressure unit on main and counter spindle • Coolant system: standard unit with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), flow rate 19 l/min • Extraction: D 150 mm connection for central extraction system Additional equipment • None specified (no robots, bar feeders, chip conveyors, or external automation listed)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, A Mitutoyo roundness measuring system without monitor is available. Rotational accuracy: 0.02 + H, rotational speed: 2/4/6/8/10 rpm, max. workpiece weight: 30 kg, max. workpiece diameter: 500 mm, machine weight: approx. 200 kg, control unit: Roundpak-400, version: 3.002. Documentation available. An on-site inspection is possible. Hedpev Ac Spofx Adrjfh

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° COUNTER SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° - Travel: 390 / 600 mm TURNING-MILLING SPINDLE - X-axis travel: 350 mm - Y-axis travel: ±80 mm - B-axis stroke: 270° - Minimum B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 Hjdpfjv Ig Avex Adrofh LOWER TURNING AND MILLING SPINDLE - Y-axis travel: ±80 mm - B-axis stroke: 270° - Minimum B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 TOOL CHANGER - Tool changer type: Bar loader - Number of tools in magazine: 80 - Tool change time: 4.5 s ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 68 kW WEIGHT AND DIMENSIONS - Machine height: 2,500 mm - Machine weight: 11,000 kg MACHINE HOURS - Spindle hours: 19,781 h - Turning-milling spindle hours: 9,713 h ACCESSORIES - Control: Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filter * internal coolant supply (ICS) - Chip conveyor - Spindle cooling - Parts removal