Super Chopper SC1412

Eldan SC1412

Stanje: novo, lastna masa: 17.500 kg, največja dovoljena obremenitev: 43.500 kg, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.550 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 400 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - For tractor units: 6x4 or 8x4 Lowbed: - Lowbed with external beams, extendable version, "SUPER LOW" design, approx. 7,550 mm long - Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking device - Service lines are protected within the extendable beams and automatically adjust to the lowbed length Rear Undercarriage: Fpsdpfxsh Hm Thj Apleg - Rear chassis with closed outer frame, checker plate cover, and continuous prism-shaped excavator trough approx. 1,450/900 x 505 mm, open at the rear - 2 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame Axles and Tires: - "PENDULUM AXLE", all axles hydro-mechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pins for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 / 3PMSF Included Accessories: - Prepared for bolt-on container positioning for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanized steel front wall approx. 400 mm high - One spare wheel with holder - At the galvanized front adapter bar yellow-red air couplings - 4 wheel chocks - Remote rear steering from front and rear via cable remote control with pushbuttons, including single-track monitoring for axles - Hydraulic line connections from gooseneck to lowbed with multi-coupling instead of screw coupling - Electro-hydraulic power pack - White reflective tape to EU specifications on sides, extension, and rear red - 2 wooden blocks 500x250x200 mm - European reflective plates (red-yellow) on the trailer rear - At the gooseneck and rear wall left and right each a bracket for warning boards including socket - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 - Load gauge for determination of axle loads including load diagram - On the gooseneck, plug-in ALU side and rear boards approx. 2,000 x 400 mm - The rear galvanized insert posts are removable (body length approx. 2,120 mm) - Separate air connection for air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Rear upper section of gooseneck closed with removable cover - 1 pair of steel ramps to bridge the lowbed's pick-up hooks - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm - Wireless remote control for rear steering in addition to cable remote, with signal lights at receiver for single-track monitoring - 6 pairs of threaded blocks between lashing rings under the top chord on the outer beams for mounting screwable RUD rings VLBG-4 - 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading bed - Foldable extensions, approx. 230 mm per side - Loading area features a painted sand layer for anti-slip protection - Dipper stick trough of rear chassis closed at front and rear with plug-in plates - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - alu 15%)

Stanje: dober (rabljeno), Industrijski roboti Proizvajalec: Kuka Tip: KR6, KR6-2, KR6arc Tip: KR16L6, KR16L6-2, KR16, KR16-2, KR16-2 S, KR16-2 F Vsi tipi z upravljalnikom KRC2ed05 Fjdpfotuc U Rox Aplspg Kuka KR6 KRC2ed05 Leto izdelave 2006 Kuka KR6-2 KRC2ed05 Leto izdelave 2011 Kuka KR6arc KRC2ed05 Leto izdelave 2006-2007 = več na zalogi Kuka KR16L6 KRC2ed05 Leto izdelave 2009 Kuka KR16L6-2 KRC2ed05 Leto izdelave 2011 Kuka KR16 KRC2ed05 Leto izdelave 2007-2009 = več na zalogi Kuka KR16-2 KRC2ed05 Leto izdelave 2010-2012 = več na zalogi Kuka KR16-2 Speed KRC2ed05 Leto izdelave 2012 = več na zalogi Kuka KR16-2 Foundry KRC2ed05 Leto izdelave 2012

Stanje: novo, moč: 90 kW (122,37 KM), Leto izdelave: 2026, Dvovretenski drobilnik s kladivom je vrsta drobilnika, pri kateri sta na eni osi nameščena dva rotorja, ki skupaj tvorita vrteči se rotor. Dvovretenska zasnova izboljšuje zmogljivosti drobljenja ter zagotavlja bolj učinkovito in zanesljivo rešitev v primerjavi z enovretenskimi drobilniki. Ključne lastnosti in značilnosti dvovretenskega drobilnika s kladivom: 1. Dva rotorja: Kot že ime pove, ima drobilnik dva rotorja, ki se vrtita v nasprotnih smereh na skupni osi. Ta konfiguracija omogoča večjo silo udarca in večjo moč drobljenja. 2. Visoka zmogljivost: Zaradi dvojnega rotorja lahko drobilnik obdela večje vhodne kose in zagotavlja večjo kapaciteto kot drobilniki z enim rotorjem. Primeren je za drobljenje materialov z visoko trdoto in velikimi dimenzijami. 3. Večnamenskost: Dvovretenski drobilniki s kladivom so vsestranski in se uporabljajo v različnih panogah, kot so redukcija apnenca, sadre, premoga in drugih podobnih materialov v rudarstvu, cementni in gradbeni industriji. 4. Drobljenje z udarcem: Glavni mehanizem drobljenja je udarec kladiv ob material. Material se dovaja v drobilnik, kjer ga hitro vrteča se kladiva razbijejo in razdrobijo. 5. Nastavljiva režna odprtina: Ti drobilniki pogosto omogočajo nastavljanje reže med rotorji in udarnimi ploščami, kar omogoča nadzor nad končno velikostjo zrn. 6. Trpežnost: Robustna konstrukcija omogoča dolgotrajno uporabo pri težkih materialih in neprekinjenem obratovanju. 7. Manjša obraba: Dvojni rotor omogoča bolj enakomerno porazdelitev obrabe med kladiva in druge obrabne dele, kar lahko podaljša življenjsko dobo drobilnika. Tipične tehnične specifikacije: (Podatki se lahko razlikujejo glede na proizvajalca – navedene so standardne vrednosti za industrijske modele): Model (velikost rotorja), Maks. vhodna velikost, Izhodna velikost, Kapaciteta (t/h), Skupna moč motorjev 600 × 400, ≤110 mm, ≤3 mm, 10 – 15, 18,5+18,5 kW 800 × 600, ≤120 mm, ≤3 mm, 40 – 50, 45+45 kW 800 × 800, ≤180 mm, ≤3 mm, 50 – 60, 45+55 kW 1000 × 800, ≤180 mm, ≤3 mm, 70 – 80, 75+55 kW 1100 × 1000, ≤200 mm, ≤3 mm, 70 – 100, 90+110 kW 1400 × 1200, ≤200 mm, ≤3 mm, 90 – 110, 132+160 kW Fedpfx Ajq Nf Enjpljpg Za dodatne informacije o dvostopenjskem drobilniku s kladivom oziroma drobilniku z dvema rotorjema nam pošljite sporočilo – naša ekipa vam bo odgovorila v najkrajšem možnem času.

Stanje: novo, lastna masa: 17.250 kg, največja dovoljena obremenitev: 48.700 kg, skupna masa: 66.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.550 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 375 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 17.250 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize loading platform length, approximately 3,750 mm long - Gooseneck hydraulically liftable, lowerable, and detachable - For tractor units: 6 x 4 and 8 x 4 (or 6 x 4 with optional 1-axle dolly) Lowbed: - Lowbed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length x width approx. 7,550 mm x 2,740 mm - Mechanical locking of the extension Chassis: - Rear chassis with closed outer frame - Checker plate surface and continuous prism excavator trough approx. 1,450/900 x 505 mm, open at the rear Axles, Suspension, and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced steered - Burst protection valve on the axle compensation cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and plug pins for securing in raised position - Final coating of axles: two coats of single-color 2-component paint in "FAY-Grey-34-0260" - Technical axle load 12,000 kg - Hydraulic axle compensation - 245/70 R 17.5 Accessories: - Detachable steel front wall, approx. 400 mm high - 4 wheel chocks - Rear upper gooseneck area closed with removable cover - 1 pair of steel ramps with climbing bars and locking bolts to bridge the lowbed mounting hooks - Ramps can be positioned over or between the hooks - Mounting options for steel drive-on ramps at the rear, between the outer beams of the gooseneck - Locking point approx. every 1,000 mm on the extension - 1 lashing ring each, left and right, on the front cross member - Supply line connection strip for tractor unit, mounted at the height of outer frame profile - 6 pairs of threaded blocks on the exterior of the load floor inner beams for attaching M24 screw rings - 6 pairs of recessed lashing rings on the outside of the load floor outer beams, foldable inwards and outwards - 1 pair of threaded blocks on the front and rear of the load floor outer beams for M24 screw rings - Mounting rail for loose aluminum approach ramps on the end cross member of the vehicle - Central lubrication system with 2 pumps, brand BEKAMAX - Remote steering front and rear, cable remote controlled, with axle tracking control - 3 kW electro-hydraulic power unit for hydraulic operations, except hydraulic winches - Removable galvanized loading floor, can be placed in 3 elements between the outer beams, with hardwood covering - Foldable extensions, approx. 230 mm per side - Loose extension boards, steel-edged - 4 warning signs approx. 423 x 423 mm - Radio remote control for rear steering - 3.5” kingpin - Anti-slip coating on the left chamfer of the gooseneck - Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings Fodpsh Hm Tzefx Aplspg - Guide plate from gooseneck for the fifth wheel plate, approx. 800 mm wide - 1 spare wheel with mounting adapter - Parking position on the gooseneck for warning signs when not in use - 2 pairs of stake pockets integrated into the chassis outer frame, for plug-in stakes approx. 100 x 50 mm - Excavator stick trough of rear chassis closed at the rear with a removable plate - Trailer color: Mercedes-Benz 7350 Novagrey

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), A shredder manufactured by Gross Apparatebau GmbH, previously used in the wood industry, is available. Feed opening (X/Y): 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90 rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm–40mm, extraction nozzle diameter: 160mm, machine dimensions (X/Y/Z): approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation is available. On-site inspection possible. Fpjdpfeu Nlkxjx Apljg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25,000-liter mixing tanks, one casting robot, and two release agent robots is available. Performance: 225 t/24h, mold carriers: 42, mixing positions for additive blending: 10, mixing head type: MQ, max. working pressure: 180 bar, pressure vessel: 330 bar. Foam types: rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid fill foam, cold-curing flexible foam, hot-curing flexible foam. Multiple mold foaming is possible. Complete documentation available. On-site inspection is possible. Fedpfxjttbd Ns Aplspg

Stanje: novo, Leto izdelave: 2026, Comprising Large Bale Breaker Type MHB and Straw Shredder Type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (lead time approx. 15 weeks) Suitable for round or square bales. Includes frequency inverter (FU) – this controls the speed of the sliding floor. The bales are placed on the sliding floor and the feed of the milling unit is started. The tines of the milling unit tear the straw from the bale and throw it into the hopper. Ideally, the bale breaker is combined here with a straw shredder. Technical Data Bale Breaker: Capacity: 1–2 bales per hour, up to a maximum of 600 kg per hour (depending on sieve size used in the straw mill, kW rating of the straw mill). Without the straw mill, the bale breaker can process up to 900 kg/h of straw. Max size square bale: 2400 x 1200 x 800 mm (L x W x H) Milling unit motor: 5.5 kW, 380 Volt Sliding floor feed: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for larger straw shredder (18.5 kW) + €3,940 net Technical Data MHZ with Special Hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting knives Sieve with interchangeable inserts available in (10, 12, 15) 22, 30, 45 mm perforation With star-delta switch, overload protection, and 8 m power cable, ready to plug in Blow-out spout 160 mm Blow distance approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg Fpedpob Nulhefx Aplsg --- Options at additional cost: Feeding auger + €970 net Cyclone (suspension to be provided by customer) *should be no more than 10 m away + €2,970 net Simple filter €1,750 net --- Other options: Industrial extraction system (ex-demo) + from €9,950 net Optional rotary valve *renders material pressureless + €5,750 net Control system: from €1,620 net Special breaker extension 3 m (*other dimensions must be calculated) + €9,750 net Briquette press MPP 180 S; little-used demo unit 70 mm briquette – up to 100 kg/h from €39,700 net * Larger machines upon request --- Description: muetek bale breaker has been developed for dissolving round and square bales of hay and straw. The shredder attached to the bale breaker shreds straw from all types of cereals, hay, maize, and miscanthus. muetek machines of the MHZ / MHB series are characterized by robust construction and heavy-duty build. muetek bale breakers of the MHB series are equipped with a chain conveyor on which the straw bale can be placed using a front loader. The support surface is adjustable depending on the bale type. The chain conveyor pushes the bale against the milling rotor, with adjustable feed speed. The milling rotor is equipped with several teeth that tear up the straw bale. The straw separated from the bale is ejected. --- Basically, the machines are suitable for dry input materials: - Straw - Hay --- Disintegration of hemp is only possible with a special breaker Surcharge approx. €9,720 net (depending on version) Shredding of hemp is not possible with the straw mill. Requirements for the input material: Maximum moisture content 12%

Stanje: dober (rabljeno), Leto izdelave: 2020, Rotor diameter 260 mm Feed opening approx. 800 x 1200 mm Rotor length approx. 800 mm Motor 18.5 kW Technical data available on request Fjdpfowzaizjx Aplopg Required space approx. 2050 x 1550 mm All information provided without guarantee

Stanje: pripravljen za uporabo (rabljen), 🔧 Ključne specifikacije Rezkalni sistem: Štiriosna konfiguracija z dvema rezkalnima gredema in dvema čistilnima gredema. Premer rezkalnega diska: Približno 280 mm (11 palcev). Dimenzije rezkalne enote: Delovna širina 1.000 mm in dolžina 700 mm. Fodpfx Aswnx Uiopljpg Odpiranje lijaka: Približno 1.400 mm x 1.600 mm. Moč motorja: Standardno opremljen z dvema motorjema po 18,5 kW. Obratovalna hitrost: Počasno delovanje pri približno 25 min⁻¹ za visok navor in zmanjšano raven hrupa. Teža: Približno 2.500 kg

Stanje: rabljeno, Eldan granuliatorius HG129 Fodot Uyvrspfx Apljpg