Barvni sortirnik in sortirnik polimerov

SESOTEC Colour Sorter and Polymer Sorter

Leto izdelave: 2022, stanje: skoraj kot novo (rabljeno), Piovan dryer SIST. DEUM. GMP150+2xPTUN2000 COOLING SYSTEM GMP150+2xPTUN2000 As new, unused The PTUN... module is a single drying unit for plastic material. The machine consists of the following components: • Hopper. • Support frame. • Heating chamber. Nodpsvhb S Sofx Agxswf • Connection lines. • Air control valves.

Leto izdelave: 2021, stanje: zelo dobro (rabljeno),

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 92 880 13, complete system: Nwsdpfjlhrufjx Agxef with feed hopper, discharge chute, feed conveyor belt, MFL-VORTEX impact crusher, discharge chute under the crusher

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, 8x4 (2,4 x 1,2 m) dvonadstropno sito 2,2 kW pogonski motor Teža: 1800 kg Nodpein E Hqjfx Agxswf Dolžina: 5000 mm Širina: 2000 mm Višina: 2300 mm 4,5 m transportni trak za fine delce 3 kW pogon z menjalnikom 8,5 kW bencinski vgrajeni generator Kmetijska ali cestno legalna kolesa Možna je dostava po vsem svetu, ponudbe trgovcev dobrodošle,

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25-029, skupna širina: 800 mm, skupna dolžina: 4.700 mm, skupna višina: 1.900 mm, vrsta vhodnega toka: trifazni, poraba energije: 2 kWh, Very good metal separator / metal detector for the separation of all metals (including stainless steel, VA) from a material flow. Can be used before or after an eddy current separator (non-ferrous separator) or as a stand-alone machine. Separates all metals from a grain size of approx. 1 mm. Suitable for applications with metal content up to 60%. Unique flap technology (flipper), no compressed air required. The machine is ready for immediate operation and can be inspected and tested. Camera option available on request! If the machine is too small, we also manufacture larger models. This is our demonstration machine. The maximum throughput depends on the material and application. Nodpfoqabm Eox Agxswf Price negotiable!

Leto izdelave: 2018, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: H3000TM, Universal Testing Machine H3000TM Made in Germany Crosshead travel: 520 mm Working space depth: 66 mm Total height: 1010 mm Weight: 45 kg Test speed: 1 to 500 mm/min Return speed: 500 mm/min Travel resolution: 0.01 mm We offer a very large selection of clamping tools: screw clamps, wedge grips, pneumatic and hydraulic grips. Pressure plates, bending fixtures, friction coefficient fixtures, and much more. Extensometers, long-travel transducers, clip-on gauges, climate chambers. Load cells (selectable): 50 N, 100 N, 200 N, 500 N, 1000 N, 2000 N, or 3000 N Includes Hess software for Windows 8, 9, 10, or 11 for universal test procedures; simple tests can also be performed without a PC. Includes one 5 kN SP 56g screw clamp with pyramid or rubber jaws, 30x50 mm. Factory calibration certificate with DAkkS-calibrated measuring equipment. Calibration in both tension and compression in 10 steps. Nsdpfjt Rg H Aox Agxswf The H3000TM series universal testing machine is a single-spindle machine with a robust construction made from aluminium and V2A stainless steel, featuring ball screw drives, linear ball bearings, and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor-controlled and features a membrane keypad. The two-line LCD display shows both force and travel. The testing machine can be used either as a standalone unit or with a PC via USB interface. Travel measurement is by encoder, with 0.01 mm visible resolution on the LCD (internal resolution 0.0001 mm). The machine comes with a standard load cell with 0.03% linearity and corresponding calibration. Optionally, a second channel for an additional load cell or displacement transducer can be added. The universal testing machine is available with two different travel lengths, 500 mm or 1200 mm (measured without load cell and test fixture). Scope of delivery: One load cell of your choice (50 N, 100 N, 200 N, 500 N, 1000 N, 2000 N, or 3000 N), certificate, 220 V power cable, USB cable, manual, and CE declaration of conformity. Load Cell 3000N Measuring range: 1–3000 N (tension and compression), nominal 2 mV/V output signal Overload protection: +/-100% Linearity: +/-0.05% Hysteresis: +/-0.03% Repeatability: +/-0.02% Including 1.5 m connection cable and calibration certificate.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, obratovalne ure: 470 h, nosilnost: 2.500 kg, dvižna višina: 5.850 mm, vrsta goriva: dizel, gradbena višina: 1.920 mm, lastna masa: 4.800 kg, vrsta pogona: Diesel, gradbena širina: 1.810 mm, Rigid telescopic handler Load centre: 500 Technical condition: very good Front tyres type: Pneumatic Front tyres size: 12-16.5 Front tyres condition: 80 - 100% Rear tyres type: Pneumatic Rear tyres size: 12-16.5 Rear tyres condition: 80 - 100% Battery voltage: 12V Nsdpfx Aev Ntfyogxjwf Image for illustration purposes only - Fork carriage - Interior rear-view mirror - Radio antenna - Radio pre-wiring - Additional hydraulic function info - Tilt function shut-off JSM - Sun visor, front roof window - Rear-view mirror at the rear of the machine - Roof window wiper - 95mm power cable - Engine pre-heating - Diesel pre-heater - EU version - Easy Link STD module 3rd valve, rear work lights, front work lights, particulate filter, fully enclosed cab, CE certificate,

Stanje: novo, Leto izdelave: 2024, ♻ Univerzalna uporaba (les razni, palete vključno z žeblji in sponkami, iverne plošče in ostanki, furnirji, MDF-plošče, karton, plastika …) ✔ Moč: 30 kW ✔ Dolžina rotorja: 870 mm ✔ Premer rotorja: 270 mm ✔ Hitrost rotorja: 80-120 rpm ✔ Število nožev: 2x19 ✔ Granulacija: 10-50 mm ✔ Kapaciteta: do 7 m3/h* ✔ Odprtina za ekstrakcijo: 200 mm ✔ Vsipna odprtina: 1446 x 1565 mm ✔ Dimenzije D/Š/V: 2,15/1,97/2,04 m ✔ Teža: 2050 kg Nedpfxjiq U D Eo Agxowf 2 leti garancije ali 2000 delovnih ur

Stanje: novo, Leto izdelave: 2025, Powder Coating – The perfect layer for lasting protection. Powder coating is a highly effective and widely adopted method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, ensuring uniform adhesion to the surface and forming an even coating. To achieve optimum adhesion and durability, the substrate is thoroughly cleaned and prepared beforehand. Oils, dirt, and other contaminants are removed to ensure a clean surface. This step is essential to ensure effective bonding of the powder with the substrate, resulting in a robust and long-lasting coating. A typical powder coating system consists of several components and devices required for the application and curing of powder coatings. Powder spray booth and spray area Njdpfx Agjwf Dpgjxowf The booth provides a controlled environment for the application process and ensures uniform powder distribution. Powder coating gun A powder coating gun is used to apply the powder coating to the workpiece. Powder supply system The powder supply system comprises a hopper or container for storing the coating material. It typically includes equipment such as powder pumps, feed hoses, and powder sieves to convey powder from storage to the spray gun. Pretreatment equipment Pretreatment systems prepare the substrate prior to powder coating application. This may involve processes such as cleaning, degreasing, rinsing, and surface treatment to ensure optimal adhesion and durability of the finish. Curing oven A curing oven is a vital component of a powder coating plant. It is used to heat the coated substrate to the appropriate temperature, allowing the powder coating to melt, flow, and cure into a durable surface. The oven commonly features a conveyor or racks to transport coated parts through the curing chamber. Exhaust system An extraction system is installed to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Stanje: dober (rabljeno), Tehnično stanje: dobro Optično stanje: dobro Cena: na zahtevo Za več informacij se obrnite na Ferdinanda Paterja. Njdpot Dlurefx Agxjwf