Stroj za površinsko brušenje

ELB-Schliff ELB-Schliff Smart S5 STC

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 825 mm, pomik po osi Z: 1.100 mm, hitro pomikanje X-os: 48.000 m/min, hitri pomik os Y: 80.000 m/min, hitri pomik na osi Z: 48.000 m/min, širina mize: 835 mm, dolžina mize: 3.500 mm, obremenitev mize: 3.500 kg, 3-Axis Machining Center MATEC - 40 HV MACH-ID 9178 Manufacturer: MATEC Model: 40 HV Control: Heidenhain iTNC530 Year of manufacture: 2008 X-axis travel: 3000 mm Y-axis travel: 825 mm Z-axis travel: 1100 mm B-axis: -3° to +105° Table length: 3500 mm Table width: 835 mm Table load capacity: 3500 kg X-axis feed rate: 48,000 mm/min Y-axis feed rate: 80,000 mm/min Z-axis feed rate: 48,000 mm/min Tool holder: HSK 100 ISO/BT/MK Spindle power: 37 kW Spindle speed: 8,000 rpm Tool changer: 40 positions Internal coolant supply: 25 bar Number of controlled axes: 4 Chip conveyor: Yes Coolant system: Yes Length: 8,000 mm Dusdpowyv Nzsfx Altew Width: 3,800 mm Height: 3,800 mm

Stanje: skoraj kot novo (rabljeno), Los compresores GA (W) VSD (accionados por variador de velocidad) son compresores de tornillo, de una sola etapa, de inyección de aceite, accionados por motor eléctrico, estacionarios. El sistema de refrigeración está equipado con un enfriador de aire y un enfriador de aceite. Los modelos GA VSD son compresores refrigerados por aire; el aire de refrigeración es generado por un ventilador. Características principales: Dusdpfx Aewxwxzjltsw - Temperatura máxima de entrada del aire: 40°C. - Temperatura máxima de salida del agua de refrigeración: 50°C. - Temperatura del aire a la salida de la válvula de escape aprox.: 30°C. - Capacidad de aceite aprox.: 17,9 L.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2000, obratovalne ure: 25.000 h, potovalna razdalja osi X: 10.300 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.800 mm, hitrost pomika os X: 10 m/min, hitrost podajanja osi Y: 10 m/min, hitrost podajanja os Z: 10 m/min, položaj glave za glodanje: 2.5 x 2.5 °, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 60 obr/min, širina mize: 3.300 mm, dolžina mize: 12.000 mm, montažni premer: 50 mm, skupna višina: 48.750 mm, skupna širina: 100.000 mm, skupna dolžina: 212.000 mm, skupna masa: 100.000 kg, Duplex-Fräsmaschinen bestehen aus zwei Maschinen, die einander gegenüber angeordnet sind und entweder separat oder als eine Einheit betrieben werden können. Das Werkstück kann dabei mit zwei simultan arbeitenden Spindeln bearbeitet werden. Produktivitätssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen, also Einzel-Fräsmaschinen Verbesserte Bauteilgenauigkeit, da die Bearbeitung in den meisten Fällen in nur einer Aufspannung erfolgt Ein einziger Bediener kann die DUPLEX-Fräsmaschinen steuern Dusdpfx Alorx Rxtetew Geringerer Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation der Investition aufgrund der hohen Produktivität DUPLEX-Lösungen ermöglichen verschiedene Konfigurationen: Einzelner Arbeitsraum oder Pendelbearbeitung Geeignet zur Bearbeitung von Baggerarmen/-auslegern wie z.B. von CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Achse: 10.300 mm Y-Achse: 2.000 mm Z-Achse: 1.800 mm Tischlänge: 12.000 mm Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Spindelleistung: 22/30 kW Spindeldrehzahlen: 60 - 3.000 min⁻¹ Spindelaufnahme: 50 ISO / BT / MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf, automatisch indexierend: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Stanje: rabljeno, Leto izdelave: 2012, Turning diameter: 350 mm Turning length: 650 mm Control system: 840 D SL ShopTurn Siemens Swing diameter over bed: 385 mm Swing diameter over cross slide: 350 mm Main spindle speed range: 0 – 4,500 rpm Main spindle drive power: 11.5 / 8 kW Max. torque: 340 Nm Spindle diameter at front bearing: 130 mm Spindle bore: 87 mm Max. bar capacity: 65 mm Max. chuck diameter: 250 mm Spindle nose: 170 h5 Number of tool stations: 12 positions Shank diameter DIN 69880: 30 mm Number of driven tool stations: 6 positions Speed range – driven tools: max. 4,500 rpm Drive power on driven tool stations: 5.5 kW Dodpfxey E Tvvj Altsuw X-axis travel: 255 mm Z-axis travel: 800 mm Tailstock quill travel: 680 mm Tailstock taper: MT 4 Clamping force: 6.8 kN Feed rate: 0 – 30,000 mm/min Rapid traverse (X / Y / Z): 30 / - / 30 m/min Feed force (X / Y / Z): 4.5 / - / 6.2 kN Total power requirement: 28 kW Machine weight: approx. 3.3 t Space requirements: approx. 5.0 x 2.5 x 2.3 m CNC universal lathe GILDEMEISTER - NEF 400 V3 - C-axis - Driven tools - Only approx. 8,093 spindle hours - incl. 1x workbench - incl. 1x tool cabinet - incl. 1x cabinet for VDI holders - incl. 8x tool holders - incl. 4x driven tools (2x radial, 2x axial)

Stanje: rabljeno, Leto izdelave: 2001, Technical details: X-travel: 2500 mm Y-travel: 1000 mm Z-travel: 750 mm Dusdpfxovptmws Altew Table size: 3220 x 1000 mm Workpiece weight approx.: 3000 kg Spindle taper ISO: 50 Spindle speed range: 20 - 5000 rpm Feed rate: 1-30000 mm/min Rapid traverse: 30 m/min Total connected load: 40 kW Required space approx.: 6.9 x 4.1 x 3.7 m Machine weight approx.: 21 t Equipped with: - CNC control HEIDENHAIN TNC 426 - 30-position automatic tool changer - RENISHAW probe - Coolant system with through-spindle coolant (IKZ) and chip conveyor - Various tool holders *

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: Dujdpfxjt Hw Shs Altsw 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: novo, Leto izdelave: 2026, dolžina brušenja: 700 mm, širina brušenja: 400 mm, COSMOS E 7040 NC precizni ploščinski brusilni stroj, brusilno območje 700 x 400 x 350 mm, moč vretena 3,7 kW, brusni kamen 300 x 50 x 76,2 mm, Mitsubishi PLC krmiljenje in pogonska tehnika, zelo uporabniku prijazen, vključno z magnetno vpenjalno ploščo 700 x 400 mm z nastavljanjem oprijemne sile, brusilno vreteno z regulacijo števila obratov, avtomatski brusilni cikel z grobim brušenjem, finim brušenjem, iskanjem in dvigovanjem, oblačenje z merilno kompenzacijo, vodni sistem s papirnatim trakom filtrom. 12 mesečna garancija. Ogled z napajanjem in preizkusno brušenje je mogoče kadar koli. Z veseljem prevzamemo postavitev/izobraževanje na lokaciji ter kasnejši servis! Financiranje/leasing ni problem, z veseljem pripravimo ponudbo! Dedpfx Asrwwt Soltouw

Stanje: dober (rabljeno), Centre bore: 2-50 mm Workpiece diameter: 8-125 mm Workpiece length: 50-1000 mm Grinding wheel speed: 13,000-45,000 rpm Dodpfx Aljrivlueteuw Various accessories MARCELS MASCHINEN AG

Stanje: rabljeno, System: Used piston-diaphragm high-pressure pump / feed pump Type: HMD-G-50-500 Flow rate: 40.0 m³/h Pressure: 1.6 MPa Duedpfx Asdkdi Teltsw

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: A-07/471A, Sheet width - max.: 130 mm Straightening roller diameter: 40 mm Djdpfxocxxx Rs Altouw Number of straightening rollers: 5 Feed rollers: 2+2 Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6x0.65x1.15 m Strip straightening machine with integrated infinitely variable VARI drive, forward and reverse operation, mode selector switch for manual and automatic operation, entry roller basket, position display of the straightening rollers via analog display, adjustment of straightening roller positions via handwheels, automatic loop control, very good condition