Hladna krožna žaga

EISELE VMS III-PV

Stanje: dober (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0783, Mitre Cold Circular Saw EISELE Model: VMS-III-S-PV Type No.: 430 Machine No.: 0783 Year of manufacture: 1986 Cutting capacity at 90° (round): Ø 120 mm Cutting capacity at 90° (flat): 150 x 110 mm Cutting capacity at 45° (round): Ø 100 mm Cutting capacity at 45° (flat): 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 & 34 rpm Mitre cuts: 45° to the left, 90°, and continuously adjustable up to 30° (60°) to the right Motor power: 2 and 2.6 kW Ksdpfx Ast A Ar Sjf Nell Power supply: 380 Volt, 50 Hz Equipment/features: - Semi-automatic vertical cold circular saw - Pneumatic quick-acting material clamping device - Infinitely variable pneumatic saw blade feed - Convenient mitre adjustment with fixed stops - Saw carriage on a highly stable rectangular guide - User-friendly and stepless lifting adjustment of the sawing unit via clamping lever - Generously dimensioned gearbox - Equipped with Eisele rotation compensation for extended saw blade lifetime - Easy saw blade changeover - High productivity while requiring minimal floor space (less than 1 m²) - Coolant system integrated in the machine base Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight: 460 kg The machine can be tested/inspected under power on site by arrangement. All specifications are subject to change. Prior sale reserved. The item is sold under exclusion of any warranty. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duty by the seller, as well as for injury to life, body, or health.

Stanje: rabljeno, Leto izdelave: 1995, Univerzalni CNC rezkalni stroj Proizvajalec: HERMLE Tip: UWF 902 S Leto izdelave: 1995 Delovne ure: 65.071 Krmiljenje: HEIDENHAIN TNC 426 Klodpov Rxa Sefx Af Nol Delovno območje X/Y/Z: 600 x 450 x 500 mm Območje vrtljajev: 20 - 6.300 min⁻¹ Orodni držalo: SK 40 M & H 3D tipalo (za tipanje obdelovanca) Vertikalno-horizontalna rezkalna naprava Vrtalna pinola Hladilna naprava Kotna miza: 900 x 458 Teža: 4.000 kg Dimenzije stroja (DxŠxV) cca: 3.900 x 2.000 x 2.000 mm

Stanje: rabljeno, Leto izdelave: 1985, Saw blade dimensions Ø 320-350 x 3.0 mm Cutting range 120 mm Cutting range at 90 degrees: square 90 x 90 mm Cutting range at 90 degrees: flat 200 x 90 mm Cutting range at 45 degrees: flat 140 x 90 mm Working height 925 mm Saw blade speeds 17 / 34 rpm Compressed air 6.0 - 8.0 bar Motor speed 1400 / 2800 rpm Total power requirement 2.0 / 2.6 kW Weight 470 kg Kjdpfx Afjxacbns Njll Dimensions L-W-H 850 x 900 x 1800 mm Machine from a vocational school (NL) Well-maintained condition (!!) Equipment: - Semi-automatic vertical cold circular saw - Pneumatic quick-release clamping device - Infinitely adjustable saw blade feed - Convenient mitre adjustment with fixed stops - Convenient lifting adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - With Eisele rotation compensation for long saw blade service life - Easy saw blade replacement - High productivity with minimal space requirement (less than 1 m²) - Coolant system * Machine link: ?machineno=1008-9164094

Stanje: rabljeno, Leto izdelave: 1975, Premer žaginega lista 350 mm Območje reza pri 90 stopinjah: okroglo 120 mm Območje reza pri 45 stopinjah: okroglo 100 mm Območje reza pri 90 stopinjah: plosko 150 x 110 mm Območje reza pri 45 stopinjah: plosko 120 x 100 mm Moč motorja 1,8 / 2,6 kW Dolžinski omejevalnik 500 mm Kedpfx Afow Nrvbe Nell Teža 450 kg Dimenzije D x Š x V pribl. 1100x710x1850 mm Polavtomatska vertikalna hladna krožna žaga s pnevmatsko napravo za vpenjanje in podajanje 4 hitrosti žaginega lista (2 preko motorja / 2 preko menjalnika): 11/22/44/88 min⁻¹ Integrirano črpalko za hladilno tekočino

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, dolžina tračnega lista: 4.115 mm, širina tračne žage: 41 mm, skupna višina: 20.000 mm, skupna dolžina: 20.000 mm, skupna širina: 20.000 mm, moč: 0,004 kW (0,01 KM), Fully hydraulic high-performance bandsaw in an extra heavy-duty design, featuring a horizontally parallel-moving saw band for cutting profiles, pipes, and solid materials of all grades, including extremely difficult-to-machine materials (e.g., titanium, Inconel, Hastelloy). Suitable for use with bi-metal and carbide-tipped saw bands. The saw unit is manufactured from solid polymer concrete, providing maximum running smoothness and saw band life. The saw unit is guided via a vertical and a round column guide (dual-column guidance) with hardened and ground guide rails. Features include hydraulic saw band tensioning and hydraulically pre-tensioned carbide saw band guides. Material clamping is accomplished by two hydraulic vices. The machine is designed for simple operation. Cutting length is set via a handwheel with 0.1 mm resolution. Piece count is set by a counter; once the target is reached, the machine switches off automatically. Material feed is via a feed cylinder and ensures maximum cutting accuracy. The machines are easy to operate and function fully automatically. SSB 260 VA 260 mm x 260 mm (Ø 260 mm) Technical data: Bandsaws KASTO Automatic bandsaws Machine type: SSB 260 VA Technical data: Dual-column guided Year: 1991 Cutting range: 260 x 260 mm Saw gearbox drive power: 4 kW Auxiliary unit drive power: 6.5 kW Cutting speed: 15–125 m/min Hydraulic saw feed: Infinitely adjustable Saw band dimensions: 4115 x 41 x 1.1 mm Feed length: 600 mm Max. with multiple feed: 5400 mm Material support height: 850 mm Machine dimensions Length/Width: 1690 x 1900 mm Height: 2030 mm Machine weight: 2100 kg Accessories: Ksdpfxjrnkrue Af Nell Chip conveyor Coolant system Multiple feed Side guide rollers Machine roller conveyor Adjustable side guide rollers Prepared for bundle clamping device Multiple feed counter Hydraulic hold-down device

Stanje: rabljeno, Leto izdelave: 1989, Saw blade diameter: 320 mm Cutting diameter: 140 mm Total power requirement: 3 kW Machine weight: approx. 0.5 t O F F E R We can offer you, subject to prior sale and errors, from stock, without obligation: EISELE Circular Saw for Straight and Mitre Cuts Type: VMS III-S-PV Year of manufacture: 1989 _____ Max. saw blade Ø: 320 mm Cutting range: tubes approx. 130 mm tube material approx. 130 mm flat material 200 x 100 / 140 x 100 mm solid material (square) 120 mm Mitre cuts may result in slightly reduced cutting sizes. Up to max. 140 mm Saw carriage stroke, manual vertical: approx. 200 mm Saw blade speed: 17–34 rpm Saw blade drive: approx. 2/2.6 kW Total drive: approx. 3 kW – 380 V – 50 Hz Weight: approx. 500 kg Accessories/Special equipment: • Saw head can be angled for mitre cuts at 30 / 45 / 90°, adjustable via scale • 2-speed pole-changing three-phase motor, max. 2.6 kW drive Kjdpow Dvivsfx Af Nell • Saw carriage feed is manual, with a long and adjustable lever • Manual workpiece vice, jaw width: approx. 120 mm • Integrated coolant system with chip tray • Roller conveyor material feed, approx. 2,000 mm • 2 spare saw blades Condition: very good – ready for demonstration Delivery: ex-stock – as inspected Payment: net – upon receipt of invoice We look forward to receiving your order. We also have larger EISELE cold circular saws and other (band, bow, cold circular) saws in stock. Further sawing machines always available – please inquire with us.

Leto izdelave: 2008, Stanje: zelo dobro (rabljeno), SANDMASTER FG2-20-2-9 Shot Peening Machine Kljdjfcpxujpfx Af Nsl Drive for Nozzle Traverse: 0.10 kW, Lighting: 24 W, Blasting Pressure Range: 0.5 - 8 bar, Abrasive Grain Size: 0.1 - 0.30 mm, Fan Motor: 250 W, Filter Surface Area: 1 m², Pressure Drop in Filter Housing (Inlet - Outlet Total): 170-250 Pa, Noise Level with Built-In Silencer: 62 dBa, Electrical Connection Voltage: Socket 3 x 400 V 50 Hz, 16A (3P+N+E), Compressed Air Connection: min. 1/4" air line with hose nipple for compressed air hose with 13 mm inner diameter, Required Compressed Air Quality: ISO 8573-1, Class 1.7.2, Maximum Traverse Length: 350 mm.

Leto izdelave: 2004, Stanje: dober (rabljeno), A well-maintained used double-miter cold circular saw from KASTO, model: “KASTOdisc A10” - Fully automatic operation - Single cut function - Hydraulic clamping devices - Central lubrication for saw guides - Coolant system - Documentation included Saw blade diameter: 350 mm Cutting capacity: - Round 90°/45°: 100/100 mm - Square 90°/45°: 100x100/100x100 mm - Rectangular 90°/45°: 170x100/130x100 mm - Shortest remnant length for single cut at 90°: 30 mm - Shortest remnant length for automatic operation at 90°: 260 mm Working height: 950 mm Dimensions (W x D x H): 1530 x 1348 x 1890 mm Weight: 980 kg For further technical details, please refer to the PDF document. Technical data and dimensions: Subject to change/errors. Ksdpfx Afjkfvhko Njll

Stanje: novo, Centre distance ----- 1000 mm Centre height ----- 230 mm Swing diameter ----- 460 mm Spindle bore ----- 80 mm Bed width ----- 336 mm Spindle speed ----- 25-1800 rpm Motor ----- 5.5 kW HEAVY-DUTY MODEL - WEIGHT 2400 KG Kledpfxega Tz Uo Af Nel INCLUDES * 3-axis digital readout by SINO * Multifix type TOOB2 quick-change tool post with 4 tool holders * 3-jaw chuck 250 mm * 4-jaw chuck 320 mm * Face plate 350 mm * Fixed and travelling steady * LED work lamp and coolant system * Electric brake CE * Toolbox with various tools

Stanje: novo, Thread diameter M10 - M33 mm Stepless speed adjustment 35/115 rpm Torque 320 Nm Air pressure 6 - 8 bar Working range 400 - 2000 mm The pneumatically driven D-JSC tapping machine features, among other things, a compressed air motor with a quick-action chuck and a stable, flexible working arm. Kedpfx Afjfg U Sls Njll The drilling arm can be mounted directly to the workbench using the mounting flange and is immediately ready for operation, ensuring quick changeover times. The tap can easily be brought to the desired tapping hole without the need to position the workpiece underneath the machine. This version features an adjustable angle, allowing the quick-action chuck to be tilted, making horizontal tapping possible as well. Pneumatic tapping machines for threads M3 - M12, angle adjustable. Includes 6 quick-change chucks with slip clutch. Options: - Clamping table with T-slots: 750x600x650mm or 990x700x800mm. - Magnetic base.