Hladna žaga

Eisele VA-0-H

Leto izdelave: 1997, stanje: zelo dobro (rabljeno), A used, very well-maintained cold circular saw from EISELE equipped with a 370mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Speed: 17/34 rpm Fsdekfp D Tspfx Acdogf Cutting capacity: Round 90°/45° right/left/30° right: 130/130/105mm Square 90°/45° right/left/30° right: 120x120/100x100/90x90mm Rectangle 90°/45° right/left/30° right: 200x100/140x100/100x100mm Pneumatic connection: 7 bar Working height: 900mm Machine dimensions (W x D x H): 865 x 1332 x 2175mm Weight: 460kg For further technical data, please refer to the PDF document. Technical data and dimensions: Subject to change and errors.

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), Cloos welding robot Qirox QRC 320 including V 6 controller, Pedestal for upright installation, Cloos welding machine Quinto II 603 (600 A), wire feeder, welding torch, torch hose package, mechanical cleaning, pressure booster 1 rotary tilting table WPK 5000, load capacity 500 kg, 1 pre-selection start, 1 control for customer-supplied sliding door Fgedpfxsizwv Ns Acdsf Gas nozzle sensor, arc seam tracking, point editor The system will be completely overhauled and serviced before delivery. A second station with an additional identical rotary tilting table is possible.

Stanje: dober (rabljeno), Leto izdelave: 2008, Schnittbereich rund | Sawing capacity round | 115 mm Max. Sägeblattdurchmesser | Max. saw blade diameter | 350 mm Schnittbereich rechteck | Sawing capacity rectangular | 200 x 70 mm Schnittbereich quadrat | Sawing capacity square | 105 x 105 mm Sägeaggregat | Sawing unit power | 6.5/8 kW Drehzahl der Sägewelle | Speed on sawing shaft | 1700/3400 rpm Maximale Vorschublänge | Maximum feed length | 9999 mm Kürzeste Vorschublänge | Shortest feed length | 10 mm Gewicht | Weight | 2300 kg Ausstattung / Equipment: - BEHRINGER SPS Steuerung / BEHRINGER PLC control - Micro-Sprüheinrichtung / Micro-spray lubrication system - Gesteuerte Nullkante / Controlled zero-point - Schnittspalterweiterung / Cutting width extension - Maschinenleuchte / Machine light - Vertikale Hauptspannung / Vertical main clamping - Rücklaufsperre / Non-return device - Absauganlage vorbereitet – (Keller Absaugeinheit ist nicht Bestandteil der Lieferung) / Extraction system prepared – (Keller extraction unit not included in delivery) Fgederz Rw Rjpfx Acdjf - Rollenbahn Zulauf ca. 5000 mm Marke Eigenbau / Roller conveyor infeed approx. 5000 mm, custom-made

Stanje: dober (rabljeno), 3 "GOODY" bench vises Fjdsrai Akspfx Acdogf

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.000 mm, premer struženja: 480 mm, • Prenova revolverja leta 2021 • Vgradnja KSS črpalke z večjim tlakom/preskrbo leta 2021 • Obnovljena vlečna cev in novo ležajeno ter brušeno vreteno leta 2022 • Pripravljeno za avtomatsko vstavljanje delov z robotsko celico Krmiljenje: CNC krmiljenje s barvnim zaslonom Siemens 840 D TEHNIČNI PODATKI Maksimalni premer vrtenja: 550 mm Maksimalni stružni premer: 480 mm Stružna dolžina: 1000 mm Premer vretena: 78 mm Pogonska moč (50%): 53 kW Območje vrtljajev (1-stopenjsko): 30 – 4000 1/min Revolverska glava: Število mest za orodja: 12, od tega gnanih: 6 Vpenjalo za cilindrična stebla: 40 mm Območje vrtljajev (2-stopenjsko): 20 – 2500 1/min Konjiček (hidravlična nastavitev pinole) Fgedpevr Tkzsfx Acdof OPREMA/PRIBOR  Popolna ohišja z osvetlitvijo delovnega prostora  Samodejna motorizirana drsna vrata  C-os  Programirano povlečen konjiček z raznimi centrirnimi konicami  12-kratna revolverska glava  Pogonski sklop za revolver  Transporter za odrezke  Naprava za hlajenje z okrepljeno črpalko, pribl. 4 bara  Vmesnik za avtomatizacijo  Razni dodatki  1x vpenjalni tulec Heimbuch SK 80, brez vpenjalnih klešč  1x triveljasto vpenjalo Schunk Rota NCF 315  1x triveljasto vpenjalo Schunk Rota NCF 250  1x dvoveljasto vpenjalo Schunk Rota NCF 250  1x strižna glava WTO  2x gnano orodje CAPTO-aksialno orodje  2x gnano orodje CAPTO-aksialno radialno orodje  3x gnano orodje CAPTO-radialno orodje  7x fiksno držalo za orodje  Elementi za postavitev  Dokumentacija

Stanje: dober (rabljeno), Leto izdelave: 2001, Stroj je v dobrem stanju. Deli, ki so prikazani ročno, niso vključeni. Rezalna orodja niso priložena. Fgjdpfx Acsrpk Rmodof

Stanje: dober (rabljeno), Leto izdelave: 2011, From company liquidation: Berg und Schmid VKS 370 HA Year of manufacture: 2011 Semi-automatic 4-meter roller conveyors on both left and right sides Left side stop with digital length measuring system, adjustable via handwheel Cutting capacities with 370mm saw blade: Round: 120mm – Square: 100mm – Rectangle: 180x100mm at 90° At 60°: Round: 110mm – Square: 90mm – Rectangle: 90x100mm Mitre cuts: left up to 60°, right up to 45° Saw blade mount: 40mm Saw blade speed: 15-70 rpm 380 Volts Coolant pump Semi-automatic operation: 1. Clamp material 2. Start saw 3. Lower frame in rapid feed mode to material start, or for series cuts begin cutting immediately 4. Stop saw band 5. Raise frame just above the material Fsdewa Ecqspfx Acdsgf 6. Release the vise

Stanje: rabljeno, Leto izdelave: 2011, EMCO Hyperturn 45 - CNC Lathe - Siemens SINUMERIK CNC control Fgodpfxjyglx Re Acdef - Main spindle equipped with full clamping cylinder (operation with bar feeder not possible; loading and unloading via automatic swing loader, see video) - Year of manufacture: 2011 Technical Data Working Area: - Max swing diameter over bed: 430 mm - Swing diameter over cross slide: 300 mm - Max turning diameter: 300 mm - Max part length: 480 mm - Max bar capacity: 45 mm - Distance between main spindle and counter spindle (spindle noses): 720 mm Slide Travel Range: - Slide travel X / X2: 160 / 150 mm - Slide travel Z / Z2 / Z3: 510 / 510 / 510 mm Main Spindle (Spindle 1): - Spindle nose - DIN 55026: KK 5 - Spindle bore: 53 mm - Spindle bearing (inner diameter): 85 mm - Max moment of inertia for clamping device and workpiece: 0.08 kgm² Main Spindle - Clamping System: - Hollow clamping cylinder (hydraulic) with draw tube, max pass-through: 45 mm - Max chuck size standard: 160 mm Main Spindle Drive: - AC hollow shaft spindle motor, power (100%/40% duty cycle): 11 / 15 kW - Speed range (stepless): 0 - 7000 rpm - Max torque at the spindle: 100 Nm Counter Spindle (Spindle 2): - Spindle nose - DIN 55026: KK 5 - Spindle bore: 53 mm - Spindle bearing (inner diameter): 85 mm - Z3 travel: 510 mm - Travel speed: 45 m/min - Max moment of inertia for clamping device and workpiece: 0.08 kgm² - Counter spindle clamping system: Hollow clamping cylinder with draw tube and integrated pneumatic parts ejector - Max chuck size: 160 mm Counter Spindle Drive: - AC hollow shaft spindle motor, power (100%/40% duty cycle): 11 / 15 kW - Speed range (stepless): 0 - 7000 rpm - Max torque at the spindle: 100 Nm C-Axes (Spindles 1 and 2): - Rotary axis resolution: 0.001 ° - Rapid traverse speed: 1000 / 100 rpm - Spindle indexing (disc brake): 0.01 ° Feed Drives: - Rapid traverse speed X / Z: 30 / 45 m/min - Feed force X: 4000 N - Feed force Z / Z2 / Z3: 5000 / 5000 / 6000 N - Position scatter Ps according to VDI 3441 in X / Y / Z: 3 / 3 / 3 µm Turret 1 and 2 (upper and lower system): - Radial tool turret: with directional logic and driven tools - Number of tool stations per turret: 12 - Tool holders according to DIN 69880: VDI 25 - Tool cross-section for square tools: 16 × 16 mm - Shank diameter for boring bars: 25 mm - Turret indexing time: 0.2 s Driven Tool Stations (coupling per DIN 5480): - Number of driven tool stations per turret: 12 - Speed range: 0 - 6000 rpm - Max drive power: 4 kW - Max torque: 16 Nm - Max permissible duty at max speed or power: 25 % Lubrication System: - Guideways, ball screws: automatic central oil lubrication - Main spindle, counter spindle: grease lubrication Chip Conveyor: - Hinged belt conveyor, discharge height: 1200 mm Electrical Connection: - Voltage supply: 400 V ~3/PE - Machine connected load: 30 kVA - Max pre-fuse for the machine: 80 A - Required short-circuit power: 2500 kVA Dimensions / Weights: - Turning axis height over floor: 1126 mm - Total height (incl. oil mist separator): 2325 mm - Installation area (incl. chip conveyor, without cooling unit): 3830 × 1950 mm - Machine net weight without chip conveyor: 4200 kg Sound Pressure Level: - Average sound pressure level: 78 db(A)

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 600 mm, Obseg rezanja okroglega jekla pri 90°: 220 mm, For sale: 1 used CNC aluminum circular saw automatic including extraction unit Manufacturer: Tronzadoras MG Model: GAA-600 - CNC Year: 2015 TECHNICAL DATA • Cutting range round: 220 mm, rectangle: 300 x 90 mm, square: 175 mm • Drive power: 4.1 kW / 400 V / 50 Hz • Speed: 3,000 rpm • Cutting speed: 55 m/sec • Blade dimensions: 600 x 50 mm • Max. cutting height: 220 mm • Dimensions: 2,020 x 1,510 x 975 mm • Weight: 650 kg The machine comes complete with a 6 m infeed roller conveyor and matching extraction unit. The saw can be inspected at our warehouse in 09599 Freiberg. Fgedpfx Ajuyyhaecdef

Leto izdelave: 1992, stanje: pripravljen za uporabo (rabljen), Swing diameter over bed/cross slide: 420mm/280mm, turning length: 1000mm, spindle bore: 78mm, max. spindle speed: 3550rpm, drive power: 35kW, tool stations: 12 (with driven tools), tool holder: VDI50, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4100mm/2300mm/2200mm, weight: approx. 10,000kg, control: Siemens 840T with C-axis. After a buffer battery replacement, the machine’s software was deleted, resulting in the loss of some machine parameters for which no documentation is available; therefore, automatic operation is currently not possible. Expected to be available from Q1, 2025. Fodpfx Acsu D H Hwsdegf