Ekscentrični tisk

Ebu Exzenterpresse [100 t] Ebu STA 100/1000

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 001669, Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Decoiler with auxiliary drive and brake Fixed coil loading saddle + decoiler traversing device Included: Pgjdpjhigmbsfx Adyjg High-Performance Precision Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine No.: 001669 Maximum pass-through width: 620 mm Number of straightening rolls: 9 Straightening roll diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rolls are multi-point supported against deflection All rolls driven via distribution gearbox and cardan shafts. Used, as-is ex stock, immediately available. Overhaul available on request. Delivery time by arrangement. Further data available shortly or on request.

Stanje: rabljeno, Leto izdelave: 1969, Wheel diameter – max. 160 mm Wheel width 355 mm Module – max. 4.5 Module – min. 0.5 Centres distance 450 mm Total power requirement 11 kW Machine weight approx. 3.8 t Space requirement approx. 2x1.7x1.6 m Wheel diameter – max. 160/175 mm Wheel width 355 mm Module – max. 4.5 Spindle bore 75 mm Centres distance 410 mm Number of teeth – min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece – max. 138 mm Centre distance between cutter and workpiece – min. 30 mm Milling head – swivel 120° Cutter speeds 70 – 400 rpm Axial feeds 0.25 – 4.0 mm/rev Radial feeds 0.09 – 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/Accessories: - Change gears - Milling arbors - Clamping devices Dra8M7 Pgodpfx Adjvz Ec Ieyjg - Documentation

Stanje: rabljeno, Coil line with decoiler and straightening machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with inactive straightener: 6 mm Sheet thickness with active straightener: 2 mm - Excellent equipment and feed aids Required floor space for complete line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition STRAIGHTENING MACHINE HMS Type RS 47-04/1, machine no. Strip width, nominal: 400 mm Strip width, max. entry width: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 pcs Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 pcs Pinch roll diameter: Ø 80 mm Inlet height, pass height: 1500 mm - Straightening rolls hardened, ground, and hard-chrome plated, center-supported - Pinch rolls hardened, ground, and hard-chrome plated, with hydraulic lift - Manual straightening roll adjustment - Hydraulic entry assistance with extendable tongue and adjustable diverting roller - Adjustable lateral strip guides - All straightening rolls driven via distribution gearbox and cardan shafts - Both pinch rolls driven via gearbox and cardan shafts - Frequency-controlled drive via gear motors - Straightener opening stroke 250 mm for cleaning or for running thicker material, stroke via trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons DECOILER HMS Type BA 1.5-06/80, machine no. Coil weight: max. 8000 kg Coil outer diameter: max. 1600 mm (with loading saddle) Coil outer diameter: max. 2000 mm (without loading saddle) Turntable diameter: Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal: max. 630 mm Gripper jaw width: 750 mm Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor and gear - Pneumatic overrun brake on the mandrel (TWINFLEX) - Hydraulic mandrel expansion, centrally via wedge slider system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil car with 12 tons lifting capacity and 300 mm stroke - Decoiler on above-floor frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central hydraulic unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Podeif Sg Sjpfx Adysgg Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical cabinet (adjacent) - All cable connections via Harting plugs Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, število ravnalnih valjev: 7, zunanji premer tuljave: 1.400 mm, notranji premer tuljave: 508 mm, premer valja: 80 mm, število podajalnih valjev: 2, premer napajalnega valja: 80 mm, premer ravnalnega valja: 80 mm, širina tuljave: 400 mm, nosilnost: 3.000 kg, 1. Odvijalec Proizvajalec: Dimeco Tip: 2371 E-FPS Letnik: 2006 Nosilnost: maks. 3 t Širina traku: maks. 600 mm Razpon razpiranja: 470 – 530 mm Zunanji premer koluta: maks. 1.400 mm Opremljen z: • Hidravlično razpiranjem • Pnevmatski pritiskalni valj od zgoraj • 6 kosov omejevalnih rok za trak • Pnevmatska kolutna zavora 2. Ravnalni stroj Proizvajalec: Dimeco Tip: 1676 C-VV Letnik: 2000 Širina traku: maks. 400 mm Debelina traku: 0,8 – 4,5 mm Število ravnalnih valjev: 7 kos Število dovajalnih in izhodnih valjev: po 2 kosi Premer valjev: 80 mm Pgodpfotgvgpjx Adyog Opremljen z: • Pogon s frekvenčnim pretvornikom • Hidravlična pomoč za vodenje traku z nosilno mizo, vodilnim nožem in zgornjo pritiskalno roko • Pnevmatsko odmikljiv dovajalni valj • Stranski vodilni valji za trak • Pnevmatsko zložljiva prehodna miza med ravnalcem in podajalnikom

Stanje: rabljeno, Leto izdelave: 2006, številka stroja/vozila: M 91317, Decoiler Coil Weight / Load Capacity: 5 t Pjdpfouqd Udox Adyogg Strip Width: 80 - 500 mm Coil Outside Diameter: 1800 mm Expansion Range: 508 mm Speed: 50 m/min Straightening Unit Strip Throughput Width: 50 - 500 mm Number of Straightening Rolls: 9 pcs. Diameter of Straightening Rolls: 65 mm Number of Feed Rolls: 2 pcs. Diameter of Feed Rolls: 150 mm Strip Thickness: 1 - 8 mm Feed Rate: 50 m/min Feed Length: 0.1 - 9999.9 mm Standard Equipment Coil Loading Station Useful Stroke: 500 mm Load Capacity: 5,000 kg Max. Strip Width: 500 mm

Leto izdelave: 2019, Stanje: novo, Brand: NXZ Model: 6316, 6318, 6319, 6320, 6326, 6328, 30224, 30315, 30316, 30324, 30328, 30330, 32221, 32315, 32316, 32317 Year of manufacture: Unused Approximate weight (kg): 11,360 Manufactured in: China Comments: Individually boxed or bundled, packaged in cartons in multiple units Pgodpfx Adsqa An Ueyog Sales condition: Sale only as complete lot

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Opis sledi Pgjdsx A Hdfjpfx Adyeg

Stanje: dober (rabljeno), Leto izdelave: 2002, skupna masa: 9.500 kg, stiskalna sila: 100 t, Model: PREN-100 Year: 2002 Weight: 9,500 kg Nominal force: 100 T Type: Pneumatic clutch eccentric press Psdjuif Tkepfx Adyegg Stroke position: 580 mm Shut height: 450 mm Maximum flywheel RPM: 500 rpm Stroke length: 13–130 mm Maximum ram adjustment: 80 mm Motor: 11 kW, 380 V, 50 Hz Minimum air pressure: 3.5–6 bar Stopping time: 285 ms Safety distance: 486 mm

Stanje: rabljeno, Pressure: 160 t Distance between uprights: ____ mm Stroke: 200 mm Table area: 2040 x 840 mm Throat depth: 450 mm Strokes per minute: 30 - 55 spm Installation height: 450 mm Ram area: 1700 x 800 mm Ram adjustment: 100 mm Total power requirement: 11 kW Pgodpfx Astqm Dgjdysg Machine weight approx. 21.1 t Space requirements approx. 2.2 x 1.94 x H 3.66 m - Safe for manual loading operations - Conversion to West system - Light curtain

Stanje: rabljeno, Pressure: 100 t Throat depth: 355 mm Stroke: 8 - 130 mm Table surface: 710 x 1200 mm T-slots in table: 3 Clamping plate thickness: 75 mm Pgjdpfx Adjtqm Dhjyeg Stroke rate: 50/80 strokes/min Ram adjustment: 80 mm Ram surface: 450 x 560 mm T-slots in ram: 2 Bore hole (depth x diameter): 100 x 50 mm Max. distance table - ram: 540 mm Clearance between uprights: 400 mm Connected load: 11.5 kW Machine weight approx.: 9.0 t Machine dimensions: 1.65 x 2.25 x 3.05 m - Increased installation height - Equipped with draw cushion - Converted to safe control system (Pilz PLC), safe for "manual insertion work at open tooling"