Stroj za pihanje

Dynaplast SB 3000 5E

Stanje: rabljeno, Stretch blow moulding machine by Etek ISBM Line = Injection Stretch Blow Moulding Stretch blow moulding machine for single-use PET bottles from PET preform blanks Stretch blow moulding machine for rotary table production Manufacturer: ETEK / GF-Industries, Model Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power rating: 90 kW Pgsdpfokucxljx Andsn Power supply: 400 Volt, 50 Hz Net weight approx. 6,000 kg As-new condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 13-13, Stroj za pihanje BLOMAX 4 model 13-13. Stroj je brez napak in deluje v odličnem stanju s popolno funkcionalnostjo. Napajanje: 400 V / 150 A / 60.000 W Leto izdelave: 2000 Psdjt Akgwepfx Andogn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, A complete 5-layer co-extrusion blown film line with 5 extruders and all peripheral equipment is available. Overall system dimensions (L/W/H): 14m/22m/11m. Die head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melt output: 500kg/h, total power requirement: approx. 300kW. 1) Double winder by Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6 inches. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, overhauled: 2010. 3) Adhesion-promoting extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Central extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion-promoting extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 6) Outer layer extruder Kiefel Worms 80.25D, power: 125kW, screw: 5-zone barrier screw, speed: 150rpm. 7) Film calibration device Reinhold SRK 200/9.6. The entire line is controlled by a Plast Control system. Further features include: integrated width measurement, C-Scan for profile measurement, web guiding system, corona treatment, and film draw-off. Included: one spare 5-layer FSBK die head with IBC, spare rollers, ring gap blower with filter, extraction units, crane, and external control terminal. Documentation available. On-site inspection possible. Pjdev T An Sopfx Andsgn

Leto izdelave: 2010, stanje: skoraj kot novo (rabljeno), BATTENFELD PE PIPE HEAD RK 315 spiral mandrel, screen basket with 315 PE tooling Slightly used Pgedshy Aq Iepfx Andon Condition: As new The pipe head is my property Sachal Extrusion Machines Bahnhofstr 6 D-26345 Bockhorn-Grabstede

Stanje: rabljeno, BARMAG Extrusion Line comprising: 1x BARMAG Extruder KEP 200-26,3,3-S 1x KNÖDLER Translation Gearbox FZ 6000 2_Z-ED 200 – NEW, Year 2016 1x SIEMENS Drive Motor 1GG6208 with forced ventilation, 470V, 468A, 206kW, 2600rpm, excitation 310V, 6.8A – NEW, Year 2015 1x Control unit 1x SCHOLZ Dosing Unit incl. feed hopper with level sensor – Year 2004 Plant features: - Single-screw extruder, approx. year 1973 - Output: 800 kg/h - Retrofitted with new drive and gearbox in 2016 - Screw diameter: 200 mm - Screw length: 5266 mm - Process-engineering length: 26.3D - Geometry: Feed zone – barrier – mixing section - Screw material: nitrided steel - Technical documentation available Subject to prior sale Enquiries by email only please Pjdpsuak Nljfx Andegn Note: The machine is still installed and can be inspected on-site. Disassembly and transport must be organised by the buyer and are not included in the asking price.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 200 h, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 65 mm, skupna masa: 9.000 kg, vpenjalna sila: 785 kN, skupna širina: 1.800 mm, skupna dolžina: 4.500 mm, skupna višina: 3.000 mm, moč: 0,045 kW (0,06 KM), Oferujemy na sprzedaż lekko używaną wtryskarko-rozdmuchiwarkę w doskonałym stanie. Podpfxsthk Rze Andjgn Maszyna jest podłączona i w pełni sprawna, możliwość prezentacji podczas pracy. Możemy również zaoferować kilka gotowych form do produkcji kanistrów oraz kloszy lamp. Maszyna przystosowana jest do pracy z tworzywami typu PMMA, PC, PP oraz PE.

Stanje: rabljeno, Leto izdelave: 2015, Tehnične podrobnosti: Pedow I E R Nspfx Andsgn Sila zapiranja: 6600 kN Teža stroja pribl.: 45,5 t

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: LC560, Used processing plant for small dairy products, 2,000 l/h Milk Reception and Initial Storage Pgodow Ahg Rspfx Andjn The used processing line for small dairy products (2,000 L/h) starts with a milk intake unit consisting of two Lactofreeze tanks and a feed pump. Initially, operators transfer the raw milk into the tanks, where it remains chilled. This setup ensures thermal stability prior to processing. Additionally, this configuration minimizes microbial contamination while allowing a seamless transfer to the pasteurization stage. Pasteurization and Separation A plate heat exchanger with a retention section and auxiliary systems, all rated for 2,000 liters per hour, is used for pasteurization. Specifically, the pasteurizer rapidly heats the milk and holds it at a predefined temperature to eliminate pathogens. Afterwards, the GEA WESTFALIA separator with a capacity of 3,000 l/h takes over the cream separation. Simultaneously, the RANNIE homogenizer (1,000 L/h) reduces the size of fat globules, thereby enhancing emulsion stability and preventing cream separation. Fermentation and Coagulation After heat treatment, the milk proceeds to fermentation. Here, an insulated double-walled fermentation tank with a 1,000-liter capacity and planetary agitator is used. This ensures uniform bacterial activity and precise temperature control. In parallel, a 1,000-liter coagulation tank equipped with a planetary mixer initiates the coagulation process. Both tanks ensure optimal protein structuring for yogurt, cheese, and cultured cream products. Cheese Processing and Whey Separation Following coagulation, the used processing line for small dairy products (2,000 L/h) continues with cheese processing. The system consists of a 500-liter container with a drainage sieve and two curd drainage vats. Operators can therefore efficiently process large quantities of curd. Furthermore, these components simplify whey separation while ensuring compliance with hygiene standards. Their design also allows for easy cleaning and minimizes cross-contamination. Packaging Operations Once products are ready for packaging, the line integrates semi-automatic and automatic solutions. Initially, a semi-automatic filler doses pasteurized milk into 1-liter pouches. Subsequently, the yogurt cup filler automatically fills and seals 75 mm and 95 mm cups at up to 1,800 units per hour. The ETICAP (2004) rotary labelling machine applies both front and back self-adhesive labels to cylindrical cups, securing consistent label alignment and adhesion. Date Coding, Temperature Control, and Final Packaging In addition, a Videojet 1220 coder (2019) applies expiry dates to each product via conveyor. Further downstream, a vacuum packaging machine handles fresh and cheese portions. Thermal utilities include a solid fuel boiler with 115 to 150 kW output (2014) and dual transfer pumps. An ice water tank (5,000 L, 2014) and a chiller (2018) maintain constant temperatures across the entire processing line.

Stanje: rabljeno, Leto izdelave: 2020, EASYMASTER EM560-SVP-2 Pgjdpfxeubu A So Andjn Clamping force: 560 t Injection volume: 2,544 cm³

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, skupna masa: 120.000 kg, skupna višina: 5.600 mm, stiskalna sila: 1.250 t, zračni tlak: 6 letvica, razdalja med stranskimi nosilci: 1.200 mm, razdalja med stojali: 1.400 mm, hod: 500 mm, dolžina mize: 1.850 mm, širina mize: 1.600 mm, Ravnostranski ekscentrični stiskalnik ERFURT tip PKZe 1250 Odlično delovno stanje, po popolni, profesionalni obnovi. Po obnovi ni bil uporabljen. Specifikacije: Kapaciteta: 1250 ton sile Hod drsnika: 500 mm Nastavitev drsnika: 215 mm Maksimalna zapiralna višina med podložno ploščo in drsnikom (hod dol, nastavitev gor): 860 mm Delovna površina mize (širina x globina): 1600x1850 mm Pedpfx Aoubyrxjndogn Delovna površina drsnika (širina x globina): 1300x1400 mm Odprtina na mizi (širina x globina): 1100x1100 mm Moč glavnega motorja: 90 kW pri 1478 vrt/min Moč motorja za nastavitev berana: 7,5 kW pri 1450 vrt/min Število posameznih hodov: 8 min-1 Kapaciteta blazine: 200 ton sile Hod blazine: 200 mm Višina nad tlemi: 7900 mm Teža stiskalnice: 130.000 kg.