Enostolpni tisk

Durendus Montagepresse 20 Tonnen

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Dcsdpfx Afofxyhfsnsd Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: rabljeno, Contact grinding wheel dimensions: 50 x 100 Ø mm Drive motor: 380 V, 0.7 kW Space requirement: 650 x 550 x 1050 mm Djdpfx Asb Tcv Hjfnscd

Stanje: rabljeno, Leto izdelave: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood with automatic identification and removal of wood defects. Dedpfx Afowtgcxsnocd Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Commission number: 0682-10 Mains voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Fusing: 25 A Condition: used

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.154 kg, nosilnost: 210 kg, doseg roke: 3.095 mm, We offer industrial robots from the manufacturer KUKA. The scope of delivery includes the robot arm, control cabinet, and the corresponding cables. The robots come from a fully functional system and have been professionally dismantled. We conduct a functionality test and inspect the robots. If you are interested, we also offer the option of demonstrating the robots’ functions to ensure they meet your requirements. A 14-day return policy is granted for this offer. Any further warranty or guarantee is excluded. - Optional for an additional charge - Dsdpferlmqkex Afnocd We are pleased to offer a new feature for our robots: the Siemens S7-1200 Profisafe safety controller. With this controller, you can easily integrate an emergency-stop function, safety gate, and start-stop interface via the Profisafe bus. The controller is fully commissioned and programmed, allowing you to implement a cost-effective standalone solution with one robot and a safety fence. Additionally, we can provide further support with commissioning upon request. We have an extensive stock of these robots, and the listed prices refer to the package price. Discounts are negotiable for larger order quantities. We invite you to contact us again to discuss further details. Sale to commercial customers only.

Stanje: novo, Hidravlična stiskalnica RHTC 100 TON M/H-M/C-2 Model: 100 TON M/H-M/C-2 Leto: 2025 Stanje: Novo Številka zaloge: 2796 Delovna širina: 1000 mm Dodsxwk E Aepfx Afnecd Hod: 380 mm Največja zmogljivost: 100 ton

Stanje: novo, Load capacity: 30,000 kg Dead weight: 429 kg Dimensions: 2450 mm Height: 535 mm Width: 265 mm Maximum length: 4250 mm Extendable to (+ 800 JP): 6200 mm Extendable to (+ 2 x 800 JP): 8500 mm Warranty: 12 months Shackles: 4 + 4 pcs Extensions (1 set each, 4 pcs.): 800 JP Mounting beam for straps: 800 LKP Additional lifting eye: 800 LK Lifting eye for wide straps: 800 NKL Alignment plate: 800 TL Unwinder: 800 AR 7 Storage rack: 800 ST 2 XLift Lifting Beam – The Number 1 for All Applications Various trades and industrial sectors have different load handling requirements. Therefore, universal cross beams are, of course, available in different load ranges. Our offering extends from lifting beams with a load capacity of three tons up to lifting devices with a load capacity of up to 50 tons. The beams have the lowest possible dead weight without compromising stability and thus safety in use. Each model is easy to handle and, thanks to small hole spacings, can cover a wide range of hanging lengths. Dcedpfx Afsd R Hvyonjd Universal lifting beams are particularly suitable for a wide variety of lifting tasks, as they can be used as beam lifting beams, spreader beams, or 4-point beams. The cross-shaped arrangement of the beams, which gives the traverses their name, also ensures that the vertical faces of the load are only minimally compressed. Adjusting the individual hole spacings is effortless, even for laypersons, making these beams outstandingly user-friendly. When used as an X-beam, a greater distance between the load and chains or slings is achieved under load. Additionally, you can acquire optional accessories perfectly matched to our XLift series, such as lifting gear.

Stanje: novo, Tehnični podatki: Kapaciteta: 60 t Vgradna višina: 820 mm Maks. delovno območje: 820 x 300 mm Hod bata: 400 mm Vhodna hitrost: 6,1 mm/s Povratna hitrost: 10 mm/s Moč motorja: 3 kW Širina: 1460 mm Globina: 850 mm Višina: 2400 mm Teža, pribl.: 700 kg Oprema: - Stransko pomičen valj - Prostorno delovno območje - Višinsko nastavljiva miza - Torzijsko toga konstrukcija iz varjenega jekla Djdok Nz Ndspfx Afnscd - Manometer - Fino nastavljanje tlaka - Dodatna ročna črpalka Ležajne prizme na voljo za doplačilo.

Stanje: novo, Bandwidth 100 mm Belt length 920 mm Belt speed 7.0 m/sec Worktable 300 x 150 mm Motor 0.44 kW Motor 220 Volt Dimensions (LxWxH) 470 x 370 x 210 mm MADE IN GERMANY Features: - Robust electric belt grinding machine - Powerful drive motor - Includes sanding belt - Includes workpiece stop - Manually adjustable deflection roller - Machine base frame Dedpfx Aoxaatujfnscd - Connection cable + plug - Operating manual in German

Stanje: rabljeno, Leto izdelave: 2022, Technical details: Pressure: 30 t Stroke: 142.5 mm Table surface: 500 x 180 mm Through-hole in table: 500 x 160 mm Frame gap: 1000 mm Installation height, table/ram at top: 120 - 1020 mm Approx. machine weight: 176 kg Approx. machine dimensions LxWxH: 0.8 x 0.8 x 1.8 m Dodpfxju N A Eaj Afnecd Simple hydraulic double-column press – custom-made, welded from 20 mm steel plate. Table support with V-block: 260 x 205 mm Lower beam installation height max./min.: 1031 / 151 mm Table height above floor max./min.: 1290 / 300 mm Lower beam, vertical adjustment, manual, 10 increments, increment spacing 100 mm Ram slide, stroke cylinder Ø 63 mm with punch mounting, locating pin bore Ø 25 x 25 mm

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 42,4 kW (57,65 KM), vrsta goriva: dizel, skupna masa: 7.065 kg, Leto izdelave: 2020, obratovalne ure: 2.530 h, Oprema: UVV varnostni pregled, dodatne luči, gumene gosenice, hidravlika, hidravlika prijemala, hidravlično kladivo, kabina, klimatska naprava, računalnik na krovu, programmable auxiliary control circuit with proportional control + shut-off valve, programmable auxiliary circuit with proportional control, Dcodpfxet I Tn Us Afned auxiliary circuit for hydraulic quick coupler, programmable auxiliary circuit with proportional control (electric powertilt switching), auxiliary hydraulics installed up to the dipper arm with high-pressure shut-off valves, automatic engine speed reduction system, electric refueling pump, load holding valve on lift, dipper, and adjustment cylinders, overload warning device + pipe rupture protection, comfort cab ROPS, radio, automatic climate control, air-suspended driver's seat, one-key system for all locking functions, load sensing hydraulic system, automatic hydraulic track tensioning, rubber tracks 400 mm, Adjustable boom: hydraulic quick coupler Lehnhoff HS 08 including mounting kit, original Powertilt, 174° swivel, with load hook, electric grab switch