Stroj za obdelavo filmov

Duo Folienabroll- und Schneidgerät

Stanje: rabljeno, Leto izdelave: 1990, MAN 125KVA dizelski generator Redpfx Asw U N Daefaew

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Connected load: 4 kW, weight: 1 t. Rodpfehlp Efjx Afajw

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 Redpfx Aot Hw Shofaow _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: zelo dobro (rabljeno), 13 straightening rolls, Ø 150 mm Rjdpfxsv S Ad Do Afasw Strip width: 600 – 2,000 mm Strip thickness: 6 – 15 mm Design: 4-Hi cassette

Stanje: rabljeno, Leto izdelave: 2003, obratovalne ure: 200 h, Funkcionalnost: popolnoma funkcionalen, vrsta goriva: dizel, barva: modra, moč: 80 kW (108,77 KM), izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, nazivna moč: 80 kW (108,77 KM), nazivna (navidezna) moč: 100 kVA, neprekinjena (navidezna) moč: 100 kVA, Rabljeni dizelski agregat – Volvo Penta TAD 520 GE | 100 kVA / 80 kW | Zaprt Tehnične specifikacije: Znamka: SES (Scandinavian Engineering Systems A/S) Model motorja: Volvo Penta TAD 520 GE Izhodna moč: 100 kVA / 80 kW Napetost: 400/231 V Frekvenca: 50 Hz Obrati: 1500 Leto izdelave: 2003 Ohišje: Da (vključen zvočno izoliran zaboj – glejte slike) Redpfx Aewzimcsfaow Hlajenje: vodno hlajenje Krmilna plošča: integrirana Stanje: rabljeno, v dobrem delujočem stanju Dodatne informacije: Nazivna moč motorja: 102 kW PRP (trajna nazivna moč): 94,0 kW Tip alternatorja: UC 274 D Popolnoma zaprt zaboj – primeren za zunanjo namestitev Redno vzdrževan Pripravljen za ogled in takojšnjo odpremo Fotografije na zahtevo.

Stanje: zelo dobro (rabljeno), stiskalna sila: 150 t, širina mize: 3.100 mm, Zum Verkauf steht: 1 gebrauchtes, hochwertiges und sehr gut erhaltenes Bystronic Xpert CNC-Abkantpresse 3 Meter x 150 Tonnen mit motorischer Blechauflage. Rodpfxsttl D No Afajw Bystronic Beyeler Xpert 150×3100 Hersteller: Bystronic Modell: Xpert150 Baujahr: 2010 Achsen insgesamt: 9 – Hinteranschlag 6-achsig: X1, X2, R1, R2, Z1, Z2 – sowie motorische vordere Blechaufrichtehilfe Hydraulische Werkzeugklemmung Freistehend, keine Unterflur-Grube erforderlich Kapazität / Biegelänge / Presskraft: 3 Meter x 3100 mm x 150 Tonnen Komplett gewartet durch Bystronic UK Allgemeine Informationen: Modell: XPERT150x3100 Baujahr: 2010 Technische Daten: Arbeitslänge: 3100 mm Presskraft: 1.500 kN Hub: 315 mm Eilgang: 190 mm/s Arbeitsvorschub: 10 mm/s Rücklaufgeschwindigkeit: 150 mm/s

Stanje: novo, Leto izdelave: 2023, Power (kVA): 650 Rodowpgh Hjpfx Afajw

Stanje: zelo dobro (rabljeno), Stainless steel construction, Length: 1400 mm Width: 1200 mm Height: 1900 mm Redpjhvyzwjfx Afasw Weight: approx. 250 kg

Stanje: novo, Cefla sistem za lakiranje Rjdpfx Afewhbrwsaow

Leto izdelave: 2020, stanje: novo, Ultrasonic cleaning machines for washing, phosphating, chromating, degreasing, and removing paint coatings Materials ROMER ultrasonic cleaning systems use stainless steel to provide protection against acids. The tanks feature an additional insulation layer to minimize heat loss and enable faster heating. Premium materials ensure a long service life for the vibrating components. Heating System The heating elements installed in ROMER tanks are made from top-quality materials and high-temperature-resistant ceramic components. The implemented heating system provides a high thermal efficiency; hot water automatically mixes with cold water, ensuring the entire tank is evenly heated. Ultrasonic Transducers The ultrasonic transducers used in ROMER systems are mounted in submersible modules, which enhance vibration transmission and are easily replaceable. The ultrasonic frequency range is 20–40 kHz, depending on the parts being cleaned—lower frequencies are used for large, high-strength components, while higher frequencies are used for jewelry, delicate mechanical assemblies, etc. All transducers are connected with high-temperature-resistant cables. Rodjfzk Ewepfx Afajw