Naprava za obračanje zabojnikov

DUMETA D-TLRS-5 SET

Stanje: rabljeno, Tehnične podrobnosti: Premer struženja nad posteljo: 560 mm Premer struženja nad suportom: 280 mm Dolžina struženja: 2000 mm Višina konic: 280 mm Razdalja med konicami: 1600 mm Izvrtina glavnega vretena: 65 mm Območje vrtljajev: 9...1800 / 24 stopenj min⁻¹ Vzdolžni pomik: 0,025-0,09 mm/obrat Prečni pomik: 0,012-0,045 mm/obrat Pomik pinole konjička: 225 mm Priključek konjička: MK5 Redjwa I Shepfx Ah Ior Skupna priključna moč: 18 kW Teža stroja pribl.: 3,8 t Mere stroja (DxŠxV): 3,7 x 1,6 x 2,05 m Trivpenjalni vpenjalni tulec D=320 mm Zgornji suport vrtljiv ±45°

Stanje: dober (rabljeno), Unit: REWA chamber filter press, used Type: 470-15-25K-HP Design: side-bar guided Filter plate size: 470 x 470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available, tailored to the specific medium Rodpfjqakbrex Ah Ior Chamber volume: approx. 57 dm³ Filtration pressure: approx. 15 bar Material (product-contacting parts): Flange, tie rods stainless steel, PP or rubber-lined Material (non-product-contacting parts): Stainless steel Purchase or rental: Inspection of the equipment can be arranged by appointment at our facility. Other information: We supply this unit used, fully functional or refurbished and customized to your requirements. Are you interested in renting or purchasing this unit? Contact us, we are happy to assist you.

Stanje: novo, Bernardo Horizontal Bandsaw HBS 275 - 400 V Rsdpfx Asd Du T Ieh Ier Technical Specifications Cutting capacity round 90°: 225 mm Cutting capacity square 90°: 200 x 200 mm Cutting capacity flat 90°: 245 x 150 mm Cutting capacity round 45°: 160 mm Cutting capacity square 45°: 160 x 160 mm Cutting capacity round 60°: 100 mm Cutting capacity square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds 400 V: 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery • Saw blade • Workpiece stop • Base frame • Band tension pressure gauge • Quick-action vice • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Stanje: novo, Leto izdelave: 2025, New machine. Please request the current daily price and delivery time. Dimensions and Weights: Length (product): approx. 2129 mm Width/Depth (product): approx. 1046 mm Height (product): approx. 1687 mm Weight (net): approx. 645 kg Electrical Data: Drive motor power: 3 kW Supply voltage: 400 V Mains frequency: 50 Hz Hydraulic pump motor power: 1.4 kW Coolant pump motor power: 100 W Rjdpfx Aorah S Heh Ijr Total connected load: 3.8 kW Machine Data: Saw band speed(s): 20 – 80 m/min Saw band length: 3770 mm Saw band width: 34 mm Saw band thickness: 1.1 mm Cutting angle: -45 – 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting Ranges: Cutting range 0° round (solid material): 355 mm Cutting range 0° square (solid material): 300 mm Cutting range 0° upright rectangle (solid material): 300 x 490 mm Cutting range -45° round (solid material): 290 mm Cutting range -45° square (solid material): 250 mm Cutting range -45° upright rectangle (solid material): 250 x 250 mm Cutting range +45° round (solid material): 350 mm Cutting range +45° square (solid material): 290 mm Cutting range +45° upright rectangle (solid material): 290 x 340 mm Cutting range +60° round (solid material): 230 mm Cutting range +60° square (solid material): 180 mm Cutting range +60° upright rectangle (solid material): 180 x 220 mm

Stanje: novo, Leto izdelave: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials. Two-pole drive motor enables saw band speeds of 30 and 65 m/min. Electromechanical blade tension monitoring via microswitch. When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking at the cylinder is needed. Saw arm inclined by 25°, resulting in longer saw band service life. Precise and robust band guides with adjustable carbide plates. After completion of the cutting process, the saw band stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting ranges 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular (hollow section, horizontal): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular (hollow section, horizontal): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular (hollow section, horizontal): 90 x 90 mm Rodpfxjg U Uv Re Ah Ier Item no.: 3680001 Location: In stock, 54634 Bitburg - Immediately available -

Leto izdelave: 2022, stanje: novo, Lifting capacity: 10,000 kg Rotational speed: 0.03–1.6 rpm Rsdpfxsfxgp Uj Ah Ijr Faceplate diameter: 1,500 mm, extendable to 2,500 mm Welding current transmission: 800 A

Stanje: rabljeno, • Load capacity: 350 kg • 6 suction pads, 250 mm diameter, adjustable Rsdpfexnvq Ejx Ah Isr • Vacuum lifter can rotate 90° and tilt 90° • Suction pads with guide tube and electric trolley • 4 units available, new and unused • Available immediately IV: + Design Standards 1. The construction of the system strictly complies with the European CE standard EN13155:2016, the American ASME (Mechanical Engineering Association) B30-20-2006 standard, and the German UVVI8 standard, with the key design parameters exceeding those required by the above standards. 2. Safety factor: The main structure features a safety factor of 4.0; the vacuum safety level is 65%, with the standard at 85%, which is 20% above the minimum safety standard. V+ Equipment Testing and Standards 1. General requirements Whether all materials are complete, whether the equipment’s exterior is painted or scratched, whether any suction pads or tubes are damaged. 2. Items tested before leaving the factory © Equipment suction test © Pressure retention test © Alarm function test © Various control components • Price on request

Stanje: novo, Leto izdelave: 2023, doseg roke: 1.400 mm, nosilnost: 6 kg, New welding robot TIG OKIO AB6-C1400 -Country of origin: China -Model: AB6-C1400 -Number of axes: 6 Rjdpfx Aheqnt N De Isr -Reach: 1400 mm -Maximum payload: 6 kg -Control cabinet -Remote control -Wire feeder -Welding power source: TIG WSM400R -Cooler

Stanje: novo, Cutting capacity at 90 degrees, round: 240 mm Cutting capacity at 90 degrees, square: 240 mm Cutting capacity at 90 degrees, rectangular: 165 x 310 mm Saw band length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Emulsion pump - Eccentric clamp - Base frame Rsdpjhpktvsfx Ah Ior - Saw band - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Stanje: novo, Leto izdelave: 2024, Drilling and Milling Unit Kudu with CNC Control and Tool Changer (3-axis) Drilling and milling unit with traversing machining head – the table remains stationary while the drilling head moves. The unit supports both manual and fully automatic operation modes. After each drilling cycle, the machining unit automatically repositions itself in both the X and Y axes to the next drilling position. The operation is kept very user-friendly. Data transfer to the machine control is possible in DXF/DWG file formats via a programming station. Alternatively, programming can be performed directly at the machine control. The machine is highly robust and built from proven machine components. Technical Specifications: - Measuring length: 6,000 mm - Total length: 8,050 mm - Rigid machine base frame - Drilling head speed: up to 2,500 rpm (standard version); delivered with the optimal speed for your application - Tool holder: SK 40 - X, Y, and Z-axis driven by servomotors - Rapid traverse in X-axis: 20 m/min - Rapid traverse in Y-axis: 5 m/min - Distance from table top to tool holder bottom: 400 mm - Table width: 480 mm - Working height: 1,050 mm - Drilling diameter: 3 to 30 mm in St. 50 (tool-dependent) - Tapping: M4 – M30 (with compensation chuck) - Y-axis machining travel: 300 mm - X-axis tolerance: ±0.1 mm - Y-axis tolerance: 0.06 mm - Z-axis tolerance: 0.06 mm - Drilling head drive motor: 5.5 kW - Machine weight: 2,300 kg - Machine dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) - Power supply: 32 A - Air supply: 8 bar - Front safety via light barrier - Rear access protection via machine fence - Control: 21.5" touch screen panel with reinforced front glass - Simple programming at the machine - Milling of long holes and circles - Lubrication via minimum quantity spraying system - Without material clamps - Remote maintenance via TeamViewer possible (LAN interface) - Tool storage for drilling tools, with dimensions and speed - Simulation of work processes - Digital handwheel Your Advantages: - Workpiece surfaces are protected - Clear, graphical user interface - Machining right to the end of the workpiece is no problem - 50% space saving compared to moving-table systems - Chips are collected in an integrated chip tray Rjdpfx Ajfu Ivzjh Ier - Easiest programming & operation - Minimum quantity spraying system (standard) - Programming errors are eliminated through CAD/CAM You are welcome to inspect the desired system at our production/demo facility at any time. Please feel free to contact us. Plantec Maschinen GmbH