Naprava za obračanje zabojnikov

Dumeta CHGK-5-NDPU

Stanje: novo, Leto izdelave: 2024, Tank rotator with 10-ton load capacity Prodpfx Agjifk Rbopsd Dual synchronized drive Axle spacing steplessly adjustable via threaded spindle Speed steplessly adjustable with foot remote control For diameters from 300 mm to 3,500 mm Roller width and diameter: 120 x 270 mm Speed: 200 – 1,200 mm/min.

Leto izdelave: 2022, Stanje: novo, Technical data: - Load capacity: 10,000 kg - Dead weight: 850 kg - Workpiece diameter range: 50 - 3,500 mm Prodpfxsfxw H Aj Agped - Roller diameter: 250 mm - Roller width: 160 mm - Rotation speed: approx. 100–2,000 mm/min - Dual-pedal foot switch - Potentiometer for stepless speed control

Stanje: novo, Leto izdelave: 2024, Protec welding turntable, 20,000 kg load capacity Steplessly adjustable speed: 0.05 - 0.35 rpm Prsdpfxeid Szkj Agpod Hand-held remote control Foot pedal remote control available at an additional cost of €390 Height: 700 mm Diameter: 2,000 mm

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Predpfsqt Dmyox Agpjd Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GM3000.10000 H-202.41.10000.4E 160.20, Load capacity 3.2 t Reeving 4/1 Lifting height 10 m Lifting speeds 5/0.8 m/min Trolley travel speeds 20/5 m/min FEM Group 2M Operating voltage 400 V Pedsvx E Ncopfx Agperd Control voltage 230 V Flange width 300 mm Immediately available from stock

Leto izdelave: 2009, Stanje: delavnici obnovljeno (rabljeno), The roller stand is also available for rental (trial rental possible). Maximum load: 100t per set, consisting of 1x drive and 1x idler unit Workpiece diameter: 500 – 7,500 mm Rotation speed: approx. 130 - 1250 mm/min Roller material: polyurethane Predomk Iktspfx Agpsd Control: wired handheld pendant Additional options available, e.g.: additional idler units, foot switch

Stanje: novo, Leto izdelave: 2024, nosilnost: 300 kg, Welding rotary table Protec KT 300 H, 170/400 special version Horizontal load capacity: 300 kg, tilted load capacity: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Table height: 500 mm Welding current transmission: 400 A Quick-action chuck diameter 300 mm, surcharge €550 Quick-action chuck diameter 400 mm, surcharge €750 Crank gear motor with stepless adjustment 0–90° Infinitely variable speed: 0.01 to approx. 5 rpm Incl. foot remote control Digital display with welding time limitation (optional) Psdpjrypmgsfx Agpsrd

Stanje: novo, Leto izdelave: 2023, Welding turntable, vessel rotator 6000 kg load capacity Digital display with foot control Pedpjk Adl Hefx Agpsrd Diameter range: 180 mm to 3500 mm Drive roller diameter: 300 mm Dimensions: Length: 1900 mm x Width: 470 mm x Height: 390 mm Infinitely variable speed: 200 - 1800 mm/min.

Leto izdelave: 2018, Stanje: skoraj kot novo (rabljeno), Dumeta hydraulic height-adjustable welding positioner 500 kg load capacity, height-adjustable welding positioner with through-hole 100 - 200 mm Table diameter: 700 mm Horizontal height: min. 0.6 m, max. 1.2 m Psdpfx Agjhua Dqjperd Tilted height: min. 0.40 m, max. 1.0 m Rotation speed: 0.11 - 1.25 rpm Weight: 750 kg Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction

Leto izdelave: 2022, Stanje: novo, Lifting capacity: 10,000 kg Pedpfjfxgp Ujx Agpjrd Rotational speed: 0.03–1.6 rpm Faceplate diameter: 1,500 mm, extendable to 2,500 mm Welding current transmission: 800 A