Stiskalnica za stiskanje prahu

Dorst DACS

Stanje: rabljeno, TECHNICAL DATA - Grinding diameter: 0.1 – 10 mm - Max. stroke: 10 mm - Working stroke: 0–10 mm - Working grinding wheel dimensions: 150 x 50 x 50 mm - Driven grinding wheel dimensions: 100 x 50 x 40 mm - Driven grinding wheel diameter: 100 mm - Working grinding wheel speed: 4500 rpm - Driven grinding wheel speed: 20–50 rpm - Power: 6 kW - Minimum pressure: 5.6 bar Fsdpouhb N Sefx Afloft - Dimensions: 1300 x 1100 mm - Weight: 700 kg

Stanje: dober (rabljeno), Roots blower Manufacturer: Leybold Model: RUVAC WSU 2001 Cat. No.: 11741 Pumping capacity: approx. 2000 m³/h Condition: Fully overhauled Warranty: 12 months (Image similar) Fsdpfx Afodnv D Selsft

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 13.116 h, Max. bar capacity mm 20 Max. Z-axis travel, sliding/fixed headstock mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Swivel angle B-axis degrees 105 Lower turret: Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Back working attachment: Tool stations qty. 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Tool holder diameter mm 25 Sub spindle: Max. spindle bore mm 20 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant unit (basic): Pump pressure bar 3 / 8 Tank capacity l 250 Delivery rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions: Length x width x height mm see installation plan * Ffsdewuddvopfx Afljt Weight kg 5,000 * Connected load kW 40 (47 kVA)

Stanje: rabljeno, Leto izdelave: 1988, obratovalne ure: 30.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20992, Spoštovani, predstavljamo vam priložnost za nakup vakuumske peči IPSEN VTTC-324, letnik 1988. Tehnične značilnosti vakuumske peči: - Nazivna moč (Sn): 165 kVA - Nazivna napetost (Un): 400 V, 50 Hz - Nazivni tok (In): 240 A - Uporabne dimenzije komore: 450 mm x 600 mm x 900 mm - Moč grelcev: 120 kW - Napetost grelcev: 43 V, 50 Hz - Tok grelcev: 1613 A Fjdowah R Ropfx Afljft - Temperaturno območje: 350 – 1320 °C - Absolutni vakuum: 1 x 10⁻⁵ (difuzijska črpalka) - Absolutni tlak: 5 bar Skupaj s pečjo prejmete tudi veliko rezervnih delov in dodatne opreme za proces toplotne obdelave (posoda za plin, grelci, večje število krmilnikov, polnilniki ipd.). Za vse dodatne informacije me, prosim, kontaktirajte.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 mm - Max. workable length: 195 mm - Spindle speed: 10,000 rpm - Spindle drive power: 8.2 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 25.4 mm - Spindle speed: 10,000 rpm - Spindle drive power: 8.2 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 9 - Number of driven positions: 4 - Driven tool speed: 5,000 rpm TOOL HOLDER 2 - Number of positions: 8 SECONDARY MACHINING - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 7,500 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Required space: 2,912 x 1,300 mm - Machine height: 1,720 mm - Machine weight: 2,400 kg MACHINE HOURS - Power-on hours: 44,140 h - Operating hours: 28,118 h - Spindle hours: 15,281 h EQUIPMENT - Control: Fanuc 31i-B - 3-color status light - Powered tooling motors at: S11, S51 - Powered guide bushing - Parts removal unit - Parts conveyor belt Fsdpouha U Hefx Aflsft - Parts ejector - Chip conveyor - Coolant tank: KNOLL KF 200/1200 * with high-pressure pump - Bar feeder: Tornos Robobar SBF 326 - Fire extinguishing system * NB: Functionality not guaranteed. To be inspected by a qualified company appointed by the buyer.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, skupna višina: 1.810 mm, skupna dolžina: 1.930 mm, skupna širina: 1.800 mm, teža obdelovanca (maks.): 20 kg, največja hitrost vretena: 10.000 obr/min, vrsta vhodnega toka: trifazni, premer brusilnega koluta: 203 mm, skupna masa: 4.500 kg, potovalna razdalja osi X: 384 mm, pomik osi Y: 317 mm, pomik po osi Z: 217 mm, moč motorja brusilnega vretena: 12.000 W, vhodna napetost: 400 V, nos vretena: HSK-40F, CNC stroj za brušenje orodij ANCA FX 5 Linear TEHNIČNE LASTNOSTI: Barvni zaslonski zaslon na dotik: 19 ["] Pomik po osi X: 384 [mm] Ločljivost osi X: 0,0001 [mm] Pomik po osi Y: 317 [mm] Ffodpfox Nqf Njx Aflst Ločljivost osi Y: 0,0001 [mm] Pomik po osi Z: 217 [mm] Ločljivost osi Z: 0,0001 [mm] Pomik osi A: 360 [°] Pomik osi C: 230 [°] Ločljivost osi C: 0,0001 [°] Maks. dolžina brušenja: 200 [mm] Maks. premer brušenja: 200 [mm] Priklop brusilnega vretena: HSK-40F Maks. hitrost brusilnega kolesa: 10.000 [vrt/min] Moč motorja brusilnega vretena: 12 [kW] Maks. premer brusilnega kolesa: 203 [mm] Maks. teža obdelovanca v vpenjalni glavi: 20 [kg] Napajalna napetost: 400 [V] Potrebna skupna moč: 16 [kVA] Dimenzije stroja: 1930 x 1800 x 1810 [mm] Teža: 4500 [kg] OPREMA VKLJUČENA: x1 FANUC robot za nalaganje orodja x1 komplet steklenih merskih letvic na oseh X in Y x1 RENISHAW merilna sonda za obdelovance Več informacij na zahtevo.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1988,

Stanje: novo, Leto izdelave: 2025, Prod-Masz provides you with a brand-new, fully operational machine that has been tested under working conditions. It meets the requirements of applicable standards regarding design and operational safety. - The extension table facilitates handling of large sheet metal panels on the table - Support table with measuring scale - Robust, compact steel construction - High-quality, durable steel blades - Extremely sturdy, heavy cast iron frame - Ground and hardened guillotine shear blades - Rear gauge system with scale - CE-certified quality - Declaration of conformity - For steel sheets up to 1.2 mm - Open design suitable for continuous cutting - Max. working width: 3000 mm Ffedoda I Ihopfx Aflet - Motor power: 2.2 kW - Oil type: HL 46 - Pressing force: 4 t - Working pressure: 120–150 bar - Equipped with hydraulic compensators above the cutter bar Dimensions: Length: 3500 mm Width: 750 mm Height: 1150 mm Weight: approx. 1000 kg Shipping cost: 500 euros We look forward to hearing from you!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2017, obratovalne ure: 132 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20731, potovalna razdalja osi X: 500 mm, pomik osi Y: 350 mm, pomik po osi Z: 300 mm, hitro pomikanje X-os: 90 m/min, hitri pomik os Y: 90 m/min, hitri pomik na osi Z: 90 m/min, nazivna (navidezna) moč: 35 kVA, proizvajalec krmilnikov: Fanuc 31I, največja hitrost vretena: 42.000 obr/min, delovne ure vretena: 132 h, dovod hladilne tekočine: 20 letvica, moč vretenovega motorja: 15 W, nos vretena: HSK E40, vhodna napetost: 415 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Die Maschine befindet sich in einwandfreiem Zustand. Die Bearbeitungsgenauigkeit beträgt +/- 0,0015 mm (gemessen mit Zeiss Micura). Die Maschine ist ausgestattet mit Renishaw OMP400 und BLUM Pico zur Werkstück- und Werkzeugvermessung. Wiederholgenauigkeit beträgt +/- 0,001 mm. High Speed und High Accuracy Option auf Fanuc verfügbar. Fsdpfx Afsvcfi Dsloft Eine Besichtigung der Maschine unter Strom ist möglich.

Leto izdelave: 1983, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of Manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head mounting diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely adjustable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely adjustable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit bottom) Ffsdpfxod Nb A Nj Aflet Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated draw heads according to DIN 1417/18 for locking the broaching tools in the draw bridge. The needle ejector heads in the tool feeder are hydraulically locked. The machine is fitted with a coolant system with an integrated magnetic tape chip conveyor for pit installation. Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle ejectors are available on request. The machine can be inspected at our warehouse.