Center CNC za struženje in rezkanje

DOOSAN Puma TT2100SYY

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 780 mm, premer struženja: 270 mm, moč vretenovega motorja: 15 W, potovalna razdalja osi X: 195 mm, pomik osi Y: 120 mm, pomik po osi Z: 780 mm, CNC Lathe Nakamura-Tome WT-300 Year of manufacture: 2006 CNC Control: FANUC Series 18i-TB Machine weight: 12,000 kg Machine dimensions: Length: 5,230 mm Width: 2,500 mm Height: 2,300 mm Machining capacity: Max swing diameter on upper/lower turret: Ø 310 mm (both upper and lower) Distance between spindles (min - max): 120 mm – 1,200 mm Max turning diameter main spindle / sub-spindle: Ø 270 mm Max turning length: 780 mm Bar capacity main spindle / sub-spindle: Ø 65 mm Axis travels: Axis X1 / X2: 195 mm Axis Y: 120 mm (±60 mm) Axis Z1 / Z2: 780 mm Axis B: 850 mm Dcedpfewx Hicox Aa Hjr Axis C: 360° (continuous) Main spindle and sub-spindle: Spindle speed: 50 – 4,500 rpm Spindle nose: ASA A2-6 Chuck diameter: Ø 225 mm Minimum programmable C-axis increment: 0.001° Spindle motor power (cont./30 min): 11/15 kW (both spindles) Turret No.1 & No.2 (identical): Tool positions (static / driven): 24 positions (12 driven) Driven tool speed: 3,600 rpm Driven tool motor power: 3.7 / 5.5 kW Turning / boring tool dimensions: 25×25 mm / Ø 32 mm Rapid traverses: Axis X1 / X2 / Y: 16,000 mm/min Axis Z1 / Z2: 24,000 mm/min Axis B: 36,000 mm/min Axis C: 100 rpm Axis B: 27,000 mm/min Included accessories: LNS MOVE bar feeder (2,300 mm length capacity) Chip conveyor Coolant collection tank with wash pump High-pressure pump with external coolant tank Various fixed and driven toolholders Tool presetting arm with dual RENISHAW probe heads Part unloading arm Manuals, electrical diagrams and CE Declaration

Stanje: dober (rabljeno), Leto izdelave: 2015, In very good condition. FANUC 31IB controller Dcjdpfxjv Acpho Aa Her

Stanje: rabljeno, Leto izdelave: 2004, Technical details: Swing diameter over bed: 850 mm Swing diameter over cross slide: 580 mm Turning length: 4000 mm Centre distance: 4000 mm Faceplate diameter: 800 mm Control system: Siemens 810D Spindle speed: 1 - 1600 rpm / 2-step Spindle torque: 6000 Nm Feed drive AC: X = cross + Z = longitudinal: 16,000 / 20,000 N Rapid traverse x-axis: 4 m/min Rapid traverse y-axis: 7 m/min Spindle bore: 130 mm (Spindle nose DIN 55027 size 11) Operating hours / On-time: to be read out h Tailstock quill taper: ISO MK 6 Tailstock quill stroke: 350 mm Max. workpiece weight between centres: 5,000 kg Max. workpiece weight unsupported: 1,800 kg Interface: RS 232 / V24 Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Total installed power: approx. 52 kW Machine weight approx.: 14.0 t Machine dimensions (LxWxH) approx.: 2.6 x 9.1 x 2.5 m Cycle lathe with Siemens cycle control Motor: 37 kW, rated speed 1,500 rpm; max. speed 6,500 rpm; torque 235 Nm two gear ranges Range II: spindle torque 258.9 to 1,364.6 Nm Range I: spindle torque 1,050.4 to 5,536.1 Nm Feed drive: three-phase servo drive 2x chip conveyors Double electric cabinet Parat quick change toolholder Coolant system Dcodeu Ix Izepfx Aa Hjr Incl. various accessories (see photos), as well as steady rest and 3-jaw chuck Ø 500 mm Rota-S plus

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Turning-milling center Takisawa TMM 250 3, year of manufacture 2016, Fanuc control Turning length: 1300 mm Turning diameter: 350 mm Spindle speed (max.): 4000 rpm 9 axes 2 x spindles 2 x C-axis Swing diameter: 780 mm Max. turning diameter: 350 mm Max. turning length: 1,300 mm Chuck diameter left: 250 mm Chuck diameter right: 200 mm Upper tool carrier with Y-axis 260 mm and B-axis 230° / +/- 115° Complete with 30-position tool changer Lower tool turret: 15-station revolver – all positions driven Fully simultaneous 5-axis machining with turning/milling support. Tool changer with 30 stations Workpiece magazine, right side of the machine, with gantry handling Driven tools at the turret Dedjrt Ip Nspfx Aa Hocr C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle, 20 bar Due to excessive administrative expenses (customs regulations), we do not deliver to Turkey, Iran, Russia, or Belarus.

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), Na voljo je CNC 5-osni stružno-rezkalni center Mazak z nasprotno glavo. Premer nihanja: 820 mm, obdelovalni premer: 820 mm, obdelovalna dolžina: 1500 mm, maks. teža obdelovanca v vpenjalni glavi/med konicama: 650 kg/150 kg, glavna vretena hitrost: 1600 vrt/min, premer vretena: 185 mm, moč: 30 kW/40 kW, sila konjička: 15 kN, iztez konjička: 1466 mm, orodje: BT50, število obratov: 10.000 vrt/min, hodi X/Y/Z: 870 mm/500 mm/1600 mm, hitri pomik: 40 m/min. Dimenzije stroja X/Y/Z: pribl. 6500 mm/3700 mm/3200 mm, teža: pribl. 26.000 kg, krmiljenje: Mazatrol Matrix. Dokumentacija je na voljo. Možen je ogled na kraju samem. Stroj se nahaja na Kitajskem. Dcsdpfx Aaoxf Iklo Her

Stanje: rabljeno, Leto izdelave: 1999, Maximum wheel diameter: 280 mm Wheel width: 330 mm Module - max.: 5 Module - min.: 1 Control unit: LIEBHERR CNC Total power requirement: 28 kW Machine weight: approx. 12 t Space requirement: LIEBHERR CNC-controlled gear grinding and profile grinding machine Model: LCS 282 Year of manufacture: 1999 # 1099 ----- Max. workpiece diameter: 280 mm Module: 1 - 5 Helix angle: +/- 35° Distance from table center to tool center: 15 – 285 mm Vertical grinding slide stroke: 330 mm Shifting/traversing stroke: 200 mm Minimum number of teeth: 7 Grinding spindle position above table (min./max.): 70 - 360 mm Clamping length of workpiece: 420 up to max. 620 mm Worm grinding wheel / profile grinding wheel diameter: 145 x 210 / 175 mm Speed of worm wheel/profile tool: 2,500 – 10,000 rpm Maximum table speed: 750 rpm Spindle drive: 28 kW Total drive capacity: approx. 50 kW – 400 V – 50 Hz Total weight: approx. 12,000 kg Accessories / Special Features • LIEBHERR CNC control system Type LH 90 GG, a user-friendly CNC control (B+R / IPC 5000) with gear-specific operator interface and diagnostic functions for quick troubleshooting. (Remote diagnostics possible) • Equipped with automatic threading device for positioning the grinding wheel in the tooth gap • The machine operates with three grinding processes: a. Generating grinding using CBN worm wheels = fastest processing b. Profile grinding using CBN profile grinding wheels (one or two wheels) = highest accuracy! Dedpfx Ast Hwu Asa Hocr c. Combination of a and b (most economical solution): pre-grinding with worm wheel / finish-grinding with profile grinding wheel by single part method • Automatic shifting of worm grinding wheel and automatic positioning of profile wheel • Automatic workpiece loading via a ring loader mounted on the counter column, which automatically loads and unloads raw and finished parts. Workpieces are transported to the ring loader via a separate FLEX LINK conveyor, picked up, and removed again. Thus, unmanned operation is possible. • Hydraulic workpiece clamping on the table, but without clamping device. Tailstock slide present on counter column, but without tailstock. Slide stroke up to approx. 350 mm • Completely enclosed work area with sliding door and separate CO2 fire extinguishing system/IR sensor • No original coolant system (due to central supply), and no dresser provided. Condition: good to very good – under power and ready for demonstration, compact design! Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice We appreciate your interest – over 200 gear machines constantly in stock.

Stanje: rabljeno, Leto izdelave: 2003, Krmiljenje 840D-PCU 50 V1 Kosov na zalogi: 3 Hladilna tekočina: da Transporter za ostružke: da, kW Nazivni tok generatorja: 110 A Priključna moč: 56 kW Dcedpjqn A Rrofx Aa Hsr

Stanje: rabljeno, Leto izdelave: 2008, Article: Vertical Turning and Grinding Center Brand: EMAG Model: VSC 250 DS Year of Manufacture: 2008 Control: SIEMENS 840D Grinding Spindle Speed: 30,000 rpm Turning Spindle Speed: 3,000 rpm Turret Tool Stations: 12 Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Dsdpjia Rtdofx Aa Hscr Parts handling system Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled by a spindle repair shop. Otherwise, the machine is in very good condition and fully operational. Please contact us for further information and pictures via mail(at) or

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 25.320 h, potovalna razdalja osi X: 700 mm, pomik osi Y: 400 mm, pomik po osi Z: 330 mm, največja hitrost vretena: 24.000 obr/min, delovne ure vretena: 8.221 h, Accessories: - Coolant tank MCO incl. belt filter system and scraper conveyor - M&H 3D probe - Fanuc zero-point option - Spare spindle - 2GB data server (program memory) Travel X/Y/Z mm 700 x 400 x 330 Table size mm 850 x 410 Max. table load kg 300 Machine weight/with DDR-TiB t Dcjdpfxjxmhmvo Aa Hor 2.1/2.3 Max. tool length mm 250 Max. tool diameter mm 80 Max. tool weight kg 3 Total weight kg 33 Number of tools 21 Spindle taper 7/24 taper No. 30/SK30 DIN 69871A Spindle taper BBT30 Distance spindle nose to table (with HC100) mm 250-580 Control 31i-B5 Plus Spindle speed rpm 24,000 Spindle load at 24,000 rpm (1 min) Nm | kW 35 | 26 Spindle load at 24,000 rpm (continuous operation) Nm | kW 7.5 | 5.5 Rapid traverse in all axes m/min 54 Maximum programmable feed rate mm/min 30,000 S Tool change time (2 kg tool) (cut-to-cut) 1.6 Bidirectional positioning accuracy of one axis (ISO230-2:1988) mm < 0.006 Bidirectional repeatability of axis positioning (ISO230-2:1997,2006) mm < 0.004 Air pressure consumption L/min | MPa 160 | 0.35-0.55

Stanje: rabljeno, Leto izdelave: 2016, Travel distance - X: 800 mm Travel distance - Y: 450 mm Travel distance - Z: 510 mm Control: HEIDENHAIN TNC620 Table dimensions (L x W): 1,000 x 450 mm Number of tool changer positions: 30 Vertical machining center | DOOSAN DNM 4500 equipped with 30-position tool changer, through-spindle coolant system (IKZ), and chip conveyor. The machine has only 5,365 spindle hours. The machine is in well-maintained condition. Dcjdpjwq S Aljfx Aa Hjr A video of the machine at its current location is available upon request. Technical data of the machine will follow shortly. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM4500 | DNM-4500