CNC stružni in rezkalni center

DOOSAN Puma TT 1800 SY

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Stroj je v zelo dobrem tehničnem stanju, možen preizkus po dogovoru. Krmilni sistem Fanuc, transporter za odrezke, zamenjava vijakov. Maks. premer vrtenja nad posteljo 300 mm. Maks. premer vrtenja nad suportom 230 mm. Maks. premer struženja nad posteljo z zgornjo glavo 230 mm. Maks. premer struženja nad posteljo z spodnjo glavo 230 mm. Maks. dolžina struženja 600 mm. Maks. razdalja med čeloma desnega in levega vretena 980 mm. Bledoxtqvyepfx Abxsp

Leto izdelave: 2014, Stanje: pripravljen za uporabo (rabljen), Krmilna enota Znamka: FANUC Model: 31i-MODEL B Glavni pogon Območje hitrosti vretena: 5000 Moč motorja vretena: 18,5 / 22 kW Vpetje orodja: A2-6 Število osi: 9 Pomik Pomik X-osi: 165 mm Pomik Y-osi: 100 mm Pomik Z-osi: 770 mm Bljdpexn U D Rofx Abxjp Dodatna oprema Vmesnik za LNS podajalnik palic Robot ni vključen Ta 9-osni stružni center DOOSAN PUMA TT 1800 SY je bil izdelan leta 2014 in omogoča napredno horizontalno struženje. Stroj je idealen za zahtevnejše obdelovalne naloge, saj zagotavlja visoko natančnost in učinkovitost. Če iščete vrhunsko kakovost struženja, razmislite o stroju DOOSAN PUMA TT 1800 SY, ki ga imamo v prodaji. Za dodatne informacije nas kontaktirajte. Tip uporabe Struženje

Stanje: rabljeno, Leto izdelave: 2007, Swing diameter 300 mm Turning length 600 mm Control FANUC, 18i-TB Swing diameter over cross slide 230 mm Travel X1 165 mm Travel Z1 700 mm Travel X2 190 mm Travel Z2 720 mm Travel Y +/- 50 mm Main spindle bore 76 mm Blsdpfx Aboxn Amtjxsp Main spindle speed 5,000 rpm Main spindle motor 22 kW Spindle torque 208 Nm Counter spindle bore 76 mm Counter spindle speed 5,000 rpm Counter spindle motor 22 kW Spindle torque 208 Nm Tool turret 2 x 12 stations Number of live tool stations 2 x 12 Live tooling speed 5,000 rpm Torque 47 Nm Tool drive power 5.5 kW C-axis resolution 0.001° Rapid traverse X + Z axes 20 / 40 m/min Rapid traverse Y axis 7.5 m/min Total connected load 68.4 kVA Machine weight approx. 7.8 t Accessories: Collet chuck on main spindle, hydraulic 3-jaw chuck KITAGAWA BB208, 210 mm diameter, on counter spindle, various tool holders for turret, short bar loader by HYDRAFEED, model MULTIFEED MX-1B for bar diameter 3 - 80 mm and bar lengths up to 1650 mm; chip conveyor, coolant system with band filter unit

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Offered here is a CNC turning machine from Doosan, model Puma TT1800SY-GL, including a gantry loader. The machine is in good condition and can be inspected under power at our warehouse. The scope of delivery includes various static tool holders and 4 driven tool holders. Loading onto the truck is free using an overhead crane. Make: Doosan Model: Puma TT 1800SY-GL Control: Fanuc 31i Year of manufacture: 2012 Technical specifications: Max. turning diameter (lower and upper turret): 230 mm Turning diameter over bed: 230 mm Blodpfx Absxmkfhjxsp Turning diameter over slide: 230 mm Recommended turning diameter: 210 mm Chuck size both spindles: 210 mm / 8 inch Spindle bore: 65 mm Travel distances: X1-Z1 (upper turret): 165x700 mm X2-Z2 (lower turret): 190x720 mm Y (upper turret): 100 mm A (sub spindle): 770 mm C-axis: 360° (0.001° increment) Feed rates: X1-X2-Z1-Z2: max. 20 m/min Y: 7.5 m/min A: max. 40 m/min Spindle speeds (both spindles): 6,000 rpm Spindle power S1: 22/19.6 kW Spindle power S2: 22/18.5 kW Torque both spindles: 208 Nm Number of tool stations: 24+24 lower and upper turret Max. speed driven tools: 6,000 rpm Driven tool power: 5.5/2.2 kW (7.4/3.0 kW) Power consumption: 64.86 kVA Dimensions: 3905x2250x2600 mm (machine only) + gantry loader

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, stružna dolžina: 230 mm, premer struženja: 230 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 68 mm, nos vretena: A2-6, Na voljo sta dva enaka stroja. Bljdpfx Abowzxcaoxsp

Stanje: dober (rabljeno), Leto izdelave: 2008, Description Turning diameter: 300 mm Turning length: 600 mm Control: FANUC 18i-TB + dialogue Turning diameter over cross slide: 230 mm Travel path X1: 165 mm Travel path Z1: 700 mm Travel path X2: 190 mm Travel path Z2: 720 mm Travel path Y-axis: +/- 50 mm Main spindle bore: 76 mm Main spindle speed: 5,000 rpm Main spindle drive: 22 kW Max. spindle torque: 208 Nm Counter spindle bore: 76 mm Counter spindle speed: 5,000 rpm Counter spindle drive: 22 kW Max. spindle torque: 208 Nm Turret: 2 x 12 stations Number of driven tool stations: 2 x 12 Driven tool speed: 5,000 rpm Bledpsw Av Szefx Abxep Max. torque: 47 Nm Workpiece power: 5.5 kW C-axis resolution: 0.001° Rapid traverse X + Z axis: 20 / 40 m/min Rapid traverse Y-axis: 7.5 m/min Total connected load: 68.4 kVA Machine weight approx.: 7.8 t Machine dimensions (L x W x H): 3.91 x 2.07 x 2.08 m

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 942 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 600 mm, premer struženja: 230 mm, moč vretenovega motorja: 22 W, hitrost vretena (min.): 50 obr/min, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 165 mm, pomik osi Y: 100 mm, pomik po osi Z: 700 mm, hitro pomikanje X-os: 20 m/min, hitri pomik na osi Z: 40 m/min, največja hitrost vrtenja: 5.000 obr/min, vrtljajska hitrost (min.): 50 obr/min, prehod palice: 65 mm, skupna višina: 2.100 mm, skupna dolžina: 5.000 mm, skupna širina: 2.200 mm, skupna masa: 8.800 kg, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Used 8-axis CNC lathe "DN Solutions model PUMA TT1800SY" equipped with an upper motorized turret featuring Y-axis, lower motorized turret, opposed spindles, and DN Solutions-Fanuc i-Plus iHMI CNC control. Bledpfxowuqp Es Abxop

Stanje: skoraj kot novo (rabljeno),