CNC stružnica

Doosan Puma 400B

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 66.600 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, We offer you the following: Technical data: Controller: Heidenhain iTNC 530 HSCI Travel ranges: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: - Speed range: 20 – 18,000 rpm NC rotary table: - Clamping surface: 600 x 500 mm - Maximum load: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool positions: 210 Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline control - Direct measuring systems in NC swivel rotary table incl. table cooling - Laser tool measurement BLUM NT - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Prepared for 3D quickSET - Scraper belt chip conveyor Pjdpfx Adexgnz Tjysgg - ICS (internal coolant supply), 40 bar, 600l tank, incl. rotating inspection window, barrier air, linear measuring systems, bed flushing - Rinsing gun - Mechanical oil and emulsion mist separator - Air blast through the center of the spindle - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated-arm robot - Pneumatic control and monitoring of the zero point clamping system - Selection/deselection of handling system via switch on the machine control panel - Incl. additional rinsing in the working area - Incl. machine preparation for job management - Incl. control panel arrangement left - Energy supply to the machine table incl. two-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 – 240 bar, pressure adjustment via proportional valve technology - Incl. rotary union extension to 4 channels Power-on hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the images is not included in the scope of delivery. The machine will be available approximately from October/November 2025. The ball screws and linear guides in the X and Z axes have been renewed. Accessories, pictured tools, and clamping devices are included in the delivery only if explicitly stated in the additional information. Technical data, specifications, and prior sale subject to change and errors!

Stanje: dober (rabljeno), Leto izdelave: 2011, CNC Machining Centre Fanuc Robodrill α-T21iFa TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2011 Control system: Fanuc Series 31i-MODEL A5 Spindle speed: up to 10,000 rpm Travel, X-axis: 300 mm Travel, Y-axis: 300 + 100 mm Travel, Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 stations Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter: 80 mm Permissible table load: 200 kg Machine weight: 2,050 kg Power supply: 200/220 V, 3-phase, 50/60 Hz Pgodjxflxajpfx Adysg Power consumption: 1.5 kVA SCOPE OF DELIVERY Including (not an exhaustive list): - CNC machining centre Fanuc Robodrill α-T21iFa - Coolant pump and chip tray Full scope of delivery as per photo documentation The machining centre Fanuc Robodrill α-T21iFa from 2011 stands out for its high precision and dynamics in a compact design. With travels of 300 mm in X, 300 + 100 mm in Y, and 330 mm in Z, the machine offers versatile machining options. The 21-station tool changer enables flexible production processes and reduces setup times. The spindle reaches speeds up to 10,000 rpm, enabling both fine finishing and powerful roughing operations to be performed efficiently. The Fanuc Series 31i-Model A5 control system allows for user-friendly and reliable programming. With a maximum workpiece load capacity of 200 kg and a compact construction, the machine is ideally suited for universal application in both single-part and series production. No guarantee is given for the correctness, completeness, and up-to-dateness of the information provided.

Stanje: rabljeno, Leto izdelave: 2011, Bar diameter: 32 mm Spindle bore: 38 mm Turning length: 320 mm Spindle speed: 8,000 rpm C-axis: 0.001° Sub-spindle: Pick-up station: 32 Turning length: 150 mm Spindle speed: 8,000 rpm Podpow Ed Tfsfx Adyegg C-axis: 0.001° Number of tools: 4+7+6+10 = 27 Number of milling stations: 4+4 Control unit: Mitsubishi M70 Number of axes: 5 + 2x C-axis (7 total) Chip conveyor: yes (LNS) Total power requirement: 7.5/5.5 kW Machine weight: approx. 3,300 kg Space requirement: approx. 2.5 x 1.2 x 1.82 m plus FMB CNC sliding head lathe Citizen A32-VII PL, year of manufacture 08/2011 with FMB Turbo 3-36 bar feeder Very good condition! Main spindle motor and bearings are new. Includes all accessories, clamping devices, manuals.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.134 mm, pomik osi Y: 1.016 mm, pomik po osi Z: 762 mm, model krmilnika: HASS, širina mize: 914 mm, dolžina mize: 2.134 mm, obremenitev mize: 1.800 kg, skupna masa: 11.340 kg, hitrost vretena (min.): 40 obr/min, največja hitrost vretena: 7.500 obr/min, dovod hladilne tekočine: 15 letvica, razdalja od središča mize do nosu vretena: 864 mm, moč vretenovega motorja: 22 W, nos vretena: ISO 40, število mest v zalogovniku orodij: 40, dolžina orodja: 406 mm, premer orodja: 63 mm, teža orodja: 5.500 g, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Used vertical machining center with HAAS CNC Psdpfxjwrfamj Adyegg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, stružna dolžina: 995 mm, izvrtina vretena: 80 mm, Maksimalni premer struženja: 530 mm Os X: 260 mm Os Z: 995 mm Vretenina odprtina: 80 mm Hitrost vretena: 5000 vrt./min Moč vretena: 22 kW Hitrost protivretena: 6000 vrt./min Premer prehoda protivretena: 62 mm Moč protivretena: 11 kW Menjalnik orodij: 12 pozicij Hitrost pogonskih orodij: 6000 vrt./min Tool Eye: da Delovne ure: 2800 h Dolžina: 3000 mm Širina: 1800 mm Višina: 1900 mm Pgjdpfx Adjx I Nbteyog Teža: 6350 kg Opozorilo: Podatki na tej strani so bili po najboljšem vedenju zbrani z naše strani in, kjer je bilo mogoče, od proizvajalca. Podatki so predstavljeni v dobri veri, vendar natančnost ni zagotovljena. Podatki ne predstavljajo pravne podlage ali zavezujočih pogojev. Priporočamo, da vse pomembne podatke pred nakupom preverite.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 810 mm, premer struženja nad prečnim suportom: 800 mm, premer struženja: 320 mm, moč vretenovega motorja: 25.000 W, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 73 mm, potovalna razdalja osi X: 210 mm, pomik osi Y: 110 mm, pomik po osi Z: 810 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 20 m/min, hitri pomik na osi Z: 50 m/min, največja hitrost vrtenja: 6.000 obr/min, CNC FANUC MSX-701 / MAPPS IV CAPACITIES Swing diameter over bed: 800 mm Swing diameter over cross-slide: 800 mm Maximum turning diameter: 320 mm Standard turning diameter: 200 mm Maximum distance between centres: 1,130 mm Maximum turning length: 810 mm Maximum workpiece dimensions: 300 mm TRAVELS Turret X axis 1 & 2: 210 mm Turret Y axis 1 & 2: +65 / -45 mm Turret Z axis 1 & 2: 810 mm Head B axis 2: 920 mm Psdpfx Adowlvlgjyogg MAIN SPINDLE Maximum spindle speed: 5,000 rpm Spindle motor power (30 min / continuous): 25/22 kW Maximum bar working diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° SUB-SPINDLE Maximum speed: 5,000 rpm Spindle motor power (30 min / continuous): 25/22 kW Maximum bar diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° FEED RATES Turret 1 rapid traverse X/Y/Z: 30/20/50 m/min Turret 2 rapid traverse X/Y/Z: 30/20/50 m/min TOOL TURRETS Number of turrets: 2 Number of tool stations per turret: 16 Turning tool shank section: 20 x 20 mm Maximum boring bar shank diameter: 32 mm Turret rotation time (1 position): 0.18 sec Max speed of driven tools: 6,000 rpm Driven tool motor power (5 min / continuous): 7.5/5.5 kW DIMENSIONS Footprint with chip conveyor: 5,120 x 2,720 mm Net weight: 8,300 kg Machine equipped with: • High-pressure coolant system • Bar feeder interface • Gantry parts discharge arm • Cut force management and load monitor system • No. 1 double radial driven tool holder • No. 3 axial driven tool holders • No. 2 external tool holders • No. 2 double boring bar tool holders • No. 2 single radial driven tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centring chucks, 210 mm diameter • No. 1 set of jaws for each self-centring chuck • Operating manuals and CE Declaration Year of manufacture: 2010

Stanje: rabljeno, Leto izdelave: 2005, Tehnične podrobnosti: Pomik X: 750 mm Pomik Y: 406 mm Pgedpfx Adjx Iwr Tsysg Pomik Z: 508 mm Teža stroja pribl.: 4 t Hitrost vrtalne vretena: 12.000 obr/min HAAS VF-2 je 3-osni obdelovalni center, zasnovan za natančnost, visoko točnost in zanesljivost.

Stanje: rabljeno, Leto izdelave: 2007, Swing diameter 300 mm Turning length 600 mm Control FANUC, 18i-TB Swing diameter over cross slide 230 mm Travel X1 165 mm Travel Z1 700 mm Travel X2 190 mm Travel Z2 720 mm Travel Y +/- 50 mm Main spindle bore 76 mm Main spindle speed 5,000 rpm Main spindle motor 22 kW Spindle torque 208 Nm Counter spindle bore 76 mm Counter spindle speed 5,000 rpm Counter spindle motor 22 kW Spindle torque 208 Nm Tool turret 2 x 12 stations Number of live tool stations 2 x 12 Pgsdpfx Ajxn Amtedyeg Live tooling speed 5,000 rpm Torque 47 Nm Tool drive power 5.5 kW C-axis resolution 0.001° Rapid traverse X + Z axes 20 / 40 m/min Rapid traverse Y axis 7.5 m/min Total connected load 68.4 kVA Machine weight approx. 7.8 t Accessories: Collet chuck on main spindle, hydraulic 3-jaw chuck KITAGAWA BB208, 210 mm diameter, on counter spindle, various tool holders for turret, short bar loader by HYDRAFEED, model MULTIFEED MX-1B for bar diameter 3 - 80 mm and bar lengths up to 1650 mm; chip conveyor, coolant system with band filter unit

Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, STAR SH-12 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Turning diameter: 13 mm Headstock stroke: 140 mm Spindle speed: 400 – 10,000 rpm Spindle power: 1.5 kW Number of tools: 5 Pedpfxevllmhs Adysgg Number of tools in the turret: 3 Machine dimensions: 1500 x 950 x 1650 mm Weight: Approx. 950 kg SCOPE OF SUPPLY Includes (non-exhaustive list): - STAR SH-12 CNC automatic lathe - Bar feeder - Coolant pump - Transformer For the exact scope of supply, please refer to the photos. We do not assume any liability for the accuracy, completeness or timeliness of the information provided.

Stanje: dober (rabljeno), Leto izdelave: 2000, Stroj je na voljo brez držal za orodje in brez dodatne opreme. Deli, prikazani z roko, niso priloženi. Tehnične podrobnosti so prikazane na sliki. Pjdpfxsw Tc S Us Adysgg