LPG viličarji

Doosan G30P-7

Stanje: novo, moč: 138 kW (187,63 KM), vrsta goriva: dizel, Leto izdelave: 2023, Lastna teža: 26.900 kg Kodpfxjx Eg Eue Abxodn Za dodatne informacije se obrnite na prodajo KEY-TEC.

Stanje: dober (rabljeno), Leto izdelave: 2005, potovalna razdalja osi X: 12.000 mm, pomik osi Y: 3.500 mm, Technical Description - X-axis (Longitudinal Travel of Table): 12,000 mm - Programmable Working Feed: 0.5 - 6,000 mm/min - Rapid Traverse: 20,000 mm/min - Motor Speed: 3,000 rpm - Y-axis (Vertical Travel / Column): 3,500 mm - Programmable Working Feed: 0.5 - 6,000 mm/min - Rapid Traverse: 20,000 mm/min - Motor Speed: 3,000 rpm - Rated Motor Torque: 42 Nm Z - W-axis (Spindle Head): - Boring Spindle Diameter: 150 mm - Axial Boring Spindle Stroke (Z): 1,200 mm - Rapid Traverse Z-axis: 20,000 mm/min - Boring Spindle Taper: DIN 69871, ISO 50 - Boring Spindle Diameter: 254 mm - Front Spindle Bearing Inner Diameter: 200 mm - RAM Dimensions: 400 x 400 mm - Axial Boring Spindle Stroke (W): 1,000 mm - Rapid Traverse W-axis: 15,000 mm/min - Total Axial Stroke (Z+W): 2,200 mm - Rated Spindle Motor Torque W and Z-axis: 42 Nm - Number of Spindle Gear Stages: 2 - Spindle Speed Range: 6 – 3,500 rpm - Spindle Motor Power: 60 kW Clamping Plate Fields: - Dimensions: 2 pcs. at 1,500 x 4,500 mm, 1 pc. at 2,000 x 4,500 mm - Load Capacity: 15,000 kg/m² Kedpjyuxd Nofx Abxodn Workpiece Table (Axis V1 - B1 / V2 - B2): - Table Dimensions: 2,000 x 3,000 mm - T-Slot Dimensions: 28 mm - T-Slot Pitch: 180 mm - Table Top Height from Floor: 650 mm - Load Capacity: 40 t Tool Rack Magazine ATC 13-150 R 147 - Max. Magazine Capacity: 147 pcs. - Max. Tool Weight: 35 kg - Max. Tool Length: 700 mm - Tool Taper: DIN 69871 - Tool Change Time: 28 sec. Milling Head with Indexed Vertical Axes Model TTL 2 18 360 - Tool Holder: ISO 50, DIN 69871 EQUIPMENT: - CNC Control: Heidenhain iTNC 530 - Electronic handwheel - Chip conveyor (Year of manufacture: 2023) - CE marking - Documentation

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Glavni pogon Število osi: 5 Ta petosna stružno-rezkalna center Mazak INTEGREX I-150 je bil izdelan leta 2012. Razmislite o nakupu tega centra Mazak INTEGREX I-150. Za več informacij nas kontaktirajte. Kdsdox D I Rpopfx Abxen Vrste uporabe Struženje

Stanje: novo, Leto izdelave: 2025, višina struženja: 2.000 mm, teža obdelovanca (maks.): 12.000 kg, premer čelne plošče: 2.000 mm, CNC Vertical Turning Center Kjdpfx Asxqb D Nebxsdn Model: VTC-20/30 with Fanuc 31i-B Table diameter: Ø2,000 mm Max. swing diameter: Ø 3,000 mm Max. turning height: 2,000 mm Table speed: Max. 200 rpm Table load capacity: 12,000 kg Table indexing: 0.001° Z-axis (ram vertical traverse): 1,200 mm Main spindle speed: Max. 15 ~ 2,000 rpm Ram size: 240 mm x 240 mm Milling spindle taper: ISO 50 Tool shank size: 40 mm x 40 mm Crossrail (vertical travel): 1,000 mm, 250 x 4 steps (hydraulic) Rapid traverse X-axis: 10,000 mm/min Rapid traverse 7-axis: 10,000 mm/min Cutting speed: 1 ~ 3,000 mm/min Table drive motor: AC 45/55 kW (continuous / 30 min) Milling spindle drive power ISO 50: 18.5/22 kW (continuous / 30 min) Control: Fanuc 31i-B Display unit: 15-inch TFT LCD Tape memory: 1 MB Automatic tool changer: 12 positions (for 5 turning tools + 1 cover + 6 milling tools) Standard tool holder: New 240 TCR-01 (2 units) Splash guard: Table version (R-Type, standard) External coolant system: 3 bar (80 liters/min.) Chip conveyor: hinged type 4-jaw independent manual chuck Foundation anchor bolts / leveling plates Maintenance tools and toolbox Hydraulic unit Work area lighting Signal light: 3 colors (green, red, yellow) Operating manuals (English): NC 1 CD with Fanuc instructions and 2 books with mechanical/electrical manuals Power supply: 220 V, 60 Hz, 3-phase Machine color: Manufacturer's standard OPTIONAL ACCESSORIES (#1): Automatic tool changer ATC 24 positions – on request Automatic power-off for N.C. – on request Turning tool holder Type 240TCR – on request Through-spindle coolant supply: 30 bar (pump pressure) – on request Transformer 415 V, 50 Hz, 3-phase – on request Linear scales X-, Z-axis – on request Rigid tapping – on request Automatic tool changer ATC 24 positions – on request Miscellaneous: INSTALLATION, COMMISSIONING, TRIAL OPERATION, AND TRAINING – not included in the price INSURANCE AND FREIGHT – not included in the price Subject to technical modifications/errors. The scope of equipment/accessories is determined solely by the textual item description. Any additional equipment shown – e.g., for illustration purposes – is expressly not included. The general terms and conditions of JS-Werkzeugmaschinen GmbH apply.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.200 mm, pomik po osi Z: 1.100 mm, dolžina mize: 4.500 mm, širina mize: 2.500 mm, največja hitrost vretena: 22.000 obr/min, CNC Heidenhain iTNC 640 WORKING AREA X-axis longitudinal travel: 4,000 mm Y-axis transverse travel: 2,200 mm Z-axis vertical travel: 1,100 mm Maximum interpolated feed rate: 50 m/min WORKTABLE Dimensions: 4,500 x 2,500 mm Height: 300 mm Load capacity: 15 T/m² T-slots for workpiece clamping: 28 mm DIN 650 (H12), complete with leveling pads. T-slot direction aligned parallel to the Y-axis movement. UNIVERSAL CONTINUOUS POSITIONING HEAD FOR ELECTROSPINDLE Automatic universal head indexed at 360,000 positions (every 0.001°). Rotational movement is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for 10° undercuts. Internal cooling system for bearings and axis motors. Rotation range C-axis: +/- 270° Rotation range A-axis: +/- 185° Maximum rotation speed of axes: 30 rpm Maximum working torque on A/C axes: 450 Nm Clamping torque on axes: 1,400 Nm Spindle output power (S1/S6): 22/33 kW Spindle output torque (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Constant power speed range: 3,000 to 18,000 rpm Constant torque speed range: 10 to 3,000 rpm Tool holder: HSK – A63 DIN 69893 ELECTROSPINDLE HSK – A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM: Spindle output power (S1/S6): 37/43 kW Kdodpfx Absyv In Ioxsn Spindle output torque (S1/S6): 140/165 Nm Maximum spindle speed: 15,000 rpm Constant power speed range: 2,500 to 12,000 rpm Constant torque speed range: 10 to 2,500 rpm Tool holder: HSK – A100 DIN 69893 55-POSITION CHAIN TOOL MAGAZINE, HSK - A100 / HSK – A63: Floor-mounted fixed chain magazine located at the rear of the machine, enclosed for operator safety, with a vertical tool change arm and automatic tool preparation. "Fixed position" management. Hydraulic axis locking Total tools: 55 Tool type: HSK-A63 DIN 69893 Tools: 30 Maximum tool diameter: 90 mm Maximum tool diameter with adjacent slots free: 160 mm Maximum tool length: 300 mm Maximum tool weight: 10 kg Tool type: HSK-A100 DIN 69893 Tools: 25 Maximum tool diameter: 100 mm Maximum tool diameter with adjacent slots free: 160 mm Maximum tool length: 450 mm Maximum tool weight: 20 kg REQUIRED CONNECTIONS: Maximum installed power: 177 kVA Maximum required current: 235 A Machine equipped with: • Remote electronic handwheel Heidenhain HR550 • High-pressure water and air through spindle • Semi-automatic electrospindle change, with HSK – A63 and HSK – A100 interfaces • Assorted tooling included • Renishaw probe • BLUM laser presetter • AUTOCAL automatic head calibration system • Visormax remote monitoring subscription • Electrical cabinet air conditioner • Cooling system for all axes and the electrospindle • User and maintenance manual and CE declaration of conformity

Stanje: rabljeno, Leto izdelave: 2000, Kellenberger 600 U stroj za kružno brušenje Stanje: polovno Godina proizvodnje: 2000 Tehnički podaci: Sto: Razmak između šiljaka: 600 mm Hod: 900 mm Hod po punom okretu ručnog točka grubo/fino: 20 / 2,5 mm Hod po podeljku na ručnom točku: 0,05 mm Brzina, hidraulički beskonačno podesiva: 0,02 - 6 m/min Minimalan hod za promenu smera: 2,5 mm Vreme zadržavanja pri promeni smera, beskonačno podesivo: 0 - 5 sek Opseg zakretanja: 11 stepeni Kdodpfx Asy T E Rzobxen Poprečni klizač: Hod ručnog točka (fino/grubo): 220 mm Hod po okretu ručnog točka grubo/fino: 8 / 1 mm/prečnik Podeljak na ručnom točku: 5 µm/prečnik Podeljak sa mikro podešavanjem: 1 µm/prečnik Brzo približavanje i povratak, hidraulički: 40 mm Hidrauličko pomeranje: 0,95 mm/prečnik Uradno brušenje: brzina pomeranja: 0,25 - 25 µm/sek Uzdužno brušenje: količina pomeranja po promeni smera stola: 1-30 µm/prečnik Glava brusne vretena: Brusni točak za spoljašnje kružno brušenje: 400 x 50 x 127 mm

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 397,17 kW (540,00 KM), vrsta goriva: dizel, zavore: intarder, barva: bela, vrsta prenosa: samodejen, Oprema: ABS, računalnik na krovu, retarder, New Iveco T-Way 540 hp Kingstone tipper body, 20 m³ capacity BRAND NEW, DIRECT FROM FACTORY, READY FOR REGISTRATION Gearbox: Automatic Retarder: Intarder Rear hydraulic tailgate Electric tarpaulin cover/uncover Floor thickness: 7 mm Side wall thickness: 5 mm FINANCING AND CUSTOMIZED LEASING SOLUTIONS AVAILABLE ON SITE. Kdedpfx Aoxzun Njbxen FROM 24 UP TO 96 MONTHLY INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OUR OTHER LOCATIONS: DOMENICO TRUCK SRL, NAPLES HEADQUARTERS DOMENICO ESPOSITO S.P.A., EBOLI (SA) BRANCH – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL & MAXUS CONTACTS: 0823 1686306 335 6713062 OFFICE HOURS: MONDAY-FRIDAY 8:30 AM – 7:00 PM | SATURDAY 8:30 AM – 2:00 PM WE OFFER A WIDE RANGE OF USED MULTI-BRAND COMMERCIAL & INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500 – V8 – 650 – 580 – 730 – S500 – S 500 – S500 – Stralis – Man – Nissan V8 – Intarder – 770s – Limited Edition – 660 S – Semi-trailer – Refrigerated semi-trailer – Tipper – Lamberet – Schmitz – Isuzu – Flatbed – Crane – Tipper – 4 axles – Rear 4 Axle – Tway – T-Way – 540 – 460 hp – Xway – X-Way – Three-way tipper – V8 – Scania – Frost Edition – Curtain-sider – Box body – Tailboard loader – Refrigerated cell – Insulated with fridge – Van Domenico Truck srl declines any responsibility for possible discrepancies regarding technical specifications, features, or options that may differ from those described. Please verify the specifications of the specific vehicle.

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Krmiljenje NCT104 (izdelano na Madžarskem) Mere mize: 1800 x 1800 mm X-hod: 3500 mm Y-hod: 1200 mm Z-hod: 1500 mm W-hod: 570 mm Ksdpfjyvuh Ijx Abxedn Premer vretena: D130 mm Miza se vrti preko CNC programa Vpenjanje: SK50 Teža: 32.000 kg Dimenzije (DxŠxV): 6700 x 6000 x 4420 mm

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1996, premer struženja nad prečnim suportom: 1.000 mm, stružna dolžina: 4.000 mm, premer struženja: 1.450 mm, izvrtina vretena: 150 mm, največja hitrost vrtenja: 560 obr/min, skupna masa: 20.000 kg, CNC NUM T Plus kapaciteta 4000x1450 mm na ležišču 1000 mm na prečni sani 4-čeljustna glava 1200 mm luneta Kdodpfeyzhrkex Abxsn avtomatski revolver komplet nosilcev orodja teža 20000 kg

Leto izdelave: 1981, stanje: rabljeno, Manufacturer: Deckel Model: FP 4 Table: Dimensions: 1000 x 470 mm Longitudinal travel (X-axis): 700 mm Cross travel (Y-axis): 400 mm Vertical travel (Z-axis): 450 mm Spindle overhang: 50–450 mm Spindle taper: ISO 40 Number of spindle speeds: 18 Spindle speed range: 31.5–1600 rpm Number of horizontal spindle speeds: 18 Horizontal spindle speed range: 31.5–1600 rpm Machine weight: 2000 kg Feed rates X/Y/Z axes: 18 steps, 10–500 mm/min Accessories: Milling head with quill Table size: 1000 x 470 mm Kdedpfx Abeihp U Doxsn