5-osni CNC stroj / Laser / 3D / HSK-A63

DMG DMU 60 Evo

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 66.600 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, We offer you the following: Technical data: Controller: Heidenhain iTNC 530 HSCI Travel ranges: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: - Speed range: 20 – 18,000 rpm NC rotary table: - Clamping surface: 600 x 500 mm - Maximum load: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool positions: 210 Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline control - Direct measuring systems in NC swivel rotary table incl. table cooling - Laser tool measurement BLUM NT - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Prepared for 3D quickSET - Scraper belt chip conveyor - ICS (internal coolant supply), 40 bar, 600l tank, incl. rotating inspection window, barrier air, linear measuring systems, bed flushing - Rinsing gun - Mechanical oil and emulsion mist separator Nwjdpfsxgnz Tox Ag Tjc - Air blast through the center of the spindle - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated-arm robot - Pneumatic control and monitoring of the zero point clamping system - Selection/deselection of handling system via switch on the machine control panel - Incl. additional rinsing in the working area - Incl. machine preparation for job management - Incl. control panel arrangement left - Energy supply to the machine table incl. two-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 – 240 bar, pressure adjustment via proportional valve technology - Incl. rotary union extension to 4 channels Power-on hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the images is not included in the scope of delivery. The machine will be available approximately from October/November 2025. The ball screws and linear guides in the X and Z axes have been renewed. Accessories, pictured tools, and clamping devices are included in the delivery only if explicitly stated in the additional information. Technical data, specifications, and prior sale subject to change and errors!

Stanje: zelo dobro (rabljeno), CNC stružnica DMG CLX 450 V3, letnik 2018, Siemens, v zelo dobrem stanju Nwjdpfxsx Hqh Se Ag Tjc

Stanje: rabljeno, Leto izdelave: 2012, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 500 mm, Travel range: X / Y / Z = 600 / 500 / 500 mm NC rotary table 600 x 500 mm B-axis swivel range: -5° to +110° C-axis: 360° Maximum load capacity: 400 kg, direct measuring systems incl. table cooling Dynamic package: Linear drive in X / Y axis Njdpsyc Tthofx Ag Tjwc Rapid traverse X / Y / Z: 80 m/min Acceleration X / Y / Z: 10 m/s² Active cooling for main spindle, linear drive, and table Control: Siemens 840D SL Operate Spindle: 20 - 24,000 rpm, HSK-A63 according to DIN 69893 • Tool magazine: chain-type magazine with 60 positions • Tool length measurement and breakage control: Blum Z-Nano • Scraper belt chip conveyor with cleaned slotted screen, internal coolant supply (IKZ) paper filter 40 bar, 231 l/min, 600 l tank, incl. rotating viewing window, sealing air for linear systems, bed flushing • Air blast through spindle center selectable via M function, maintained air with low oil content • Electronic handwheel • Spray gun for chip flushing • Extended chip flushing • Laminated safety glass windows for work area door and side window • Operating mode 4 • High speed settings • Probe: Blum HSK-A63 • Preparation for 3D QuickSet • Possible oil mist extraction system • New spindle installed at 25,800 spindle hours

Stanje: rabljeno, Leto izdelave: 2014, X-pomik: 600 mm Y-pomik: 500 mm Z-pomik: 500 mm Skupna priključna moč: --- kW Teža stroja cca: 9,6 t Potrebna površina cca: --- m DMG MORI DMU 60 EVO (2014) X: 600 mm Y: 500 mm Njdpfsycxinsx Ag Towc Z: 500 mm Heidenhain iTNC530 z merilno sondo TS649 Vrtljaji vretena: 14.000 1/min Revija za orodje: 60 kos / držalo orodja HSK63 Trakasti filter s sistemom notranjega hlajenja (IKZ) 40 BAR

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 5.991 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11415584024, For sale is a 5-axis CNC machining center DMG MORI DMU 50, year of manufacture 2012, equipped with a Siemens control system. The machine is in good, well-maintained condition and was in operation until recently. An on-site inspection under power is possible by appointment at any time. The DMU 50 is a vertical machining center with an integrated NC rotary/swivel table, making it ideal for precise 5-axis complete machining of complex workpieces. Typical applications include tool and mold making, manufacturing of precision components, as well as prototypes and small to medium production runs. Technical data (extract): Manufacturer: DMG MORI / Deckel Maho Model: DMU 50 Machine type: Vertical 5-axis CNC machining center Year of manufacture: 2012 Control system: Siemens Number of axes: 5 simultaneous Nsdpfx Aex S D N Teg Towc X travel: approx. 500 mm Y travel: approx. 450 mm Z travel: approx. 400 mm Spindle: Vertical motor spindle, up to approx. 14,000 rpm Tool changer: automatic, approx. 30 tool stations Country of origin: Germany Worktable Simultaneous-capable rotary tilt table Control 3D control Siemens 840D solutionline Main drive Spindle speed up to 14,000 rpm SK40 Tool magazine Tool magazine 60 stations, SK40 vertical chain Automation / Measuring / Monitoring Infrared probe TS649 DMG Direct measuring systems X/Y/Z Cooling / Chip removal Coolant-air switch-over Rinsing gun for chip cleaning Siemens Control Options Electronic handwheel General Options Mode 4 operation Second cabin door Special constructions Rotating viewing window (S-K3008) Operating hours (according to meter): Machine hours: approx. 31,987 h Spindle hours: approx. 10,489 h Condition & Scope of delivery: Used, fully functional, regularly in operation. Scope of delivery includes the machine as shown, further accessories by arrangement. Miscellaneous: Location: Birkenfeld (75217)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, skupna masa: 10.000 kg, PREMIUMANNONS – DMG MORI DMU 60 eVo (2017) | 5-axlig | TNC 640 | 120 verktygsplatser | Automationsförberedd | 40 bar Nwjdjygky Topfx Ag Tsc Översikt Här erbjuds ett högspecificerat DMG MORI DMU 60 eVo 5-axligt bearbetningscenter, tillverkat i Tyskland, utrustad med kraftfull konfiguration för krävande produktion. Maskinen är automationsförberedd och lämpar sig utmärkt för obemannad produktion samt framtida integration av pallettsystem eller robot. Viktiga egenskaper • Årsmodell: 2017 • Styrsystem: Heidenhain TNC 640 (ERGOline® styrning, 19” skärm) • 5-axlig NC-sväng-/rundbord (B-axel -5° till +110°, C-axel 360°) • 120-positions verktygsmagasin • Högvarvspindel upp till 18 000 rpm, SK40 BIG-PLUS • Automationsförberedd + utökad M65-gränssnitt • Geometriskt mätrapport från DMG MORI tillgänglig Konfiguration & Utrustning (i befintligt utförande) Styrning / Programvara / Manövrering • Heidenhain TNC 640, ERGOline® styrning, 19” display • Driftläge 4 – processövervakning under produktion • Elektroniskt handhjul 5-axligt bord / Mätteknik • NC-sväng-/rundbord 600 × 500 mm • B-axel -5° till +110°, C-axel 360° • Max last: 400 kg • Absolut mätgivarsystem (rotationsaxlar) • Renishaw OMP60 optisk IR-mätprob Spindel / Verktyg / Magasin • Spindelinterface: SK40 BIG-PLUS 18 000–20 000 rpm 35 kW (40% ED) / 25 kW (100% ED) • Verktygsmagasin: 120 platser (kedjemagasin med dubbelgripare) • Verktygsbrottdetektering TRS2 (kontaktlös detektering; lämpar sig för små diametrar) Kylvätska / Spåntransport / Inbyggnad • Intern kylmedelstillförsel (IKZ), 40 bar (pappersbandsfilter, tank 600 L) • Spånbana • Utökad spånsköljning (extra spolning av arbetsutrymmet) • Spolpistol • Spindelcentrumblåsning (aktiveras via M-funktion, konditionerad luft med låg oljehalt) • Rotationssäkerhetsfönster (roterande betraktarruta) • Olje- & emulsionstångseparator (mekanisk) • Automationsförberedd • Utökad M65-gränssnitt Anslutning / Service • DMG MORI Messenger (installationskit för maskinanslutning) • DMG MORI Netservice client (fjärrdiagnostik via extern PC)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Velikost mize: premer 600 x 500 mm, nosilnost mize: 400 kg, posamične pomike XYZ: 600 x 500 x 500 mm, B-os: -5/+110 stopinj, Nwedpfx Aewnpzajg Toc C-os: 0,001 stopinje, hitri pomiki: 80 m/min, menjalec orodij s 120 postajami, stožec vretena: HSK 63, hitrost vretena: 20.000 vrt/min, krmilnik Siemens 840D eRGOline, trakasti transporter za odrezke, hlajenje skozi vreteno.

Stanje: dober (rabljeno), Leto izdelave: 2009, obratovalne ure: 4.500 h, Na prodaj imam 5 puhal Kaeser HB 950 z motorji 110 kW in 132 kW. Nwsdpfx Aov Rmkxog Tec

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 500 mm, DMG-Mori DMU 60 Evo Linear Krmilnik Heidenhain ITNC 530 HSCI NC vrtilna nagibna miza 600 mm x 500 mm Zasuk osi B: -5° do +110° Os C 360°, vključno s hlajenjem mize Vrtljaji vretena 20 – 24.000 min⁻¹, HSK 63 A Magazin orodja s 120 mesti Infrardeči merilni senzor Renishaw OMP 60 Nwjdpfx Asxvhtneg Tsc Dinamični paket Lasersko merjenje orodij IKZ z 40/80 bar s papirnatim trakastim filtrom, 980 l, transporter ostružkov Elektronski ročni kolesnik, 3D Quickset ATC, programabilne šobe za hlajenje preko M-funkcije Način delovanja 4 Tropski paket

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 500 mm, Oprema: transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, DMG-MORI DMU 60 EVO linear, letnik 2014 Pomiki X/Y/Z: 600 mm x 500 mm x 500 mm Glavna vretena SK40 z 18.000 vrt/min NC nagibno-rotacijska miza, osi B in C Magazin za orodja s 60 mesti Njdpfx Agexvhrwo Tewc Izmenjevalnik toplote za vreteno in mizo Dinamični paket Upravljanje Siemens 840 D SL s Shop-Mill Merilna tipala z infrardečo Heidenhain TS 649 Lasersko merjenje orodja Blum Strgalo transportni trak, notranje hlajenje s papirnatim tračnim filtrom in 80 bar Separator oljne-megle emulzije Programirne šobe za hladilno sredstvo Električni ročni obroč, način delovanja 4 Cikel struženja-rezkanja

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.250 mm, premer struženja nad prečnim suportom: 500 mm, premer struženja: 390 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 450 mm, pomik osi Y: 200 mm, pomik po osi Z: 1.300 mm, prehod palice: 65 mm, skupna višina: 2.700 mm, skupna dolžina: 7.000 mm, skupna širina: 3.000 mm, skupna masa: 12.000 kg, Oprema: dokumentacija / priročnik, Manufacturer: DMGMORI Model: CTX beta 1250 TC Year of manufacture: 2008 (Retrofitted in 2022) Control: Siemens 840D Solutionline Number of axes: 5-axis Equipment: - Automatic tool changer - Swivel head as B-axis - Belt filter system with high-pressure coolant system and chip conveyor - Differential pressure clamping for main / counter spindle - Workpiece pick-up device - Preparation for bar feeder (available as an option) Nwedpfx Agjubyv Rj Tjc Technical specifications: Max. turning diameter: 500 mm X-axis: 450 mm Y-axis: 100 mm Z-axis: 1300 mm B-axis: 220° Spindle bore: 65 mm Spindle speed: 5,000 rpm Spindle power: 34 kW Counter spindle speed: 6,000 rpm Counter spindle bar capacity: 52 mm Counter spindle power: 20 kW Tool changer: 24 stations B-axis interface: HSK 63 B-axis spindle speed: 12,000 rpm B-axis spindle power: 22 kW Installation dimensions approx. L 7000 / W 2300 / H 2300 mm Weight approx. 8,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Options: • Full enclosure • NC swivel head as B-axis • Coolant unit and chip conveyor • Documentation • Geometric accuracy within new machine tolerances Condition: - Machine fully functional - Geometry within the manufacturer’s tolerances for new machines - All wear parts replaced Retrofit 2022: - Z1 and Z2/3 linear guides replaced - Y-axis linear guide replaced - Main and counter spindle overhauled - Milling spindle overhauled - B-axis (bearings and clamping) replaced - Slide covers overhauled - Hoses and cables overhauled, drag chains serviced - Cabin doors repainted, viewing windows replaced - Maintenance carried out according to manufacturer’s specifications

Stanje: dober (rabljeno), Leto izdelave: 2014, obratovalne ure: 21.000 h, Funkcionalnost: popolnoma funkcionalen, DMG MORI DMU 60 Evo 5-Axis Simultaneous Machining Centre (2014) Manufacturer: DMG Mori Model: DMU 60 Evo 5-axis simultaneous Year of manufacture: 2014 Condition: Good, used; new spindle installed in 2024 Power-on hours: 37,063 h Spindle hours: 21,313 h Control unit: Heidenhain ITNC 530 Condition: Used, fully operational Travel paths X/Y/Z: 600/500/500 mm Rapid traverse: 80 m/min Spindle speed: 20–14,000 rpm Tool magazine: 30 positions Tool holder: SK40 NC rotary tilt table: 600 x 500 mm Internal coolant supply: 40 bar, with band filter system Measuring probe: TS649 Documentation included Nwodpswp Ic Eofx Ag Tjc