DMG CLX 450 V6

DMG CLX 450 V6

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 850 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 610 mm, premer struženja nad prečnim suportom: 500 mm, premer struženja: 725 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 260 mm, pomik osi Y: 80 mm, pomik po osi Z: 610 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 30 m/min, dolžina podajanja os X: 260 mm, dolžina pomika po osi Y: 80 mm, dolžina podajanja os Z: 610 mm, vrtilni moment: 250 Nm, prehod palice: 65 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned/milled parts. - Integrated spindle motors - Counter spindle, water-cooled (preloaded roller guides), with Y-axis on main and counter spindle - Latest control technology: SINUMERIK ONE with ShopTurn conversational programming. Main Spindle: • Max. bar capacity: 65 mm • Max. torque: 250 Nm • Speed range: 0-5000 rpm Counter Spindle: • Drive power: 22 kW • Max. torque: 130 Nm • Speed range: 0-7000 rpm Turret: • 12-position VDI 30 turret, radial, with direction logic for up to 12 driven tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: • Travel: +/- 40 mm • Hollow clamping cylinder incl. draw tube • C-axis for main/counter spindle • SINUMERIK ONE / OPERATE control • 22" multi-touch display • SHOPTURN • 3D simulation • Remnant detection • USB interface • Control cabinet air conditioning • Coolant system incl. coolant pump (3.5 bar) • Chuck wash (additional pump, 3.5 bar) • Parts ejector and coolant through counter spindle • Hydraulic unit • Interface for chip conveyor • Documentation and CE certificate Control language: German/English Electronic handwheel EMCO tool breakage and wear monitoring / SINUMERIK ONE Alternating spindle speed Counter spindle as tailstock: Rbsdpfx Aex E Dncjd Tst Enables the use of the counter spindle with installed live center for workpiece support. This allows shaft parts to be supported and machined, even on machines without a tailstock, using the counter spindle. Maximum thrust force is limited to 50% of the maximum axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for connecting robots (HARTING connector, Profinet communication, dual-channel/potential-free safety signals). Digitalization package for Sinumerik: Condition monitoring SIEMENS ONE interface for connection to MDE/BDE systems. Standard features include: • Machine on – AUX ON • Automatic mode • Production mode – program active • Program running and override between 95%–105% • Piece count pulse (M30) • Programmable pulse (M300) 3D machine data / MT65-G2: 3D machine data model included Pneumatically operated finished part catcher for gentle unloading of finished parts: Finished parts are transported either to a catch box (standard) or conveyor belt (optional). Max. finished part length: 175 mm Max. finished part diameter: 65 mm Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connecting the SL1200 short bar feeder from EMCO. ...and more. Machine is available immediately!

Stanje: dober (rabljeno), Leto izdelave: 2019, številka stroja/vozila: XD-38II-CP-0703-H, premer struženja nad prečnim suportom: 38 mm, največja hitrost vretena: 6.500 obr/min, premer struženja: 38 mm, izvrtina vretena: 39 mm, moč: 7,5 kW (10,20 KM), The machine can be inspected at our location in Immendingen by prior arrangement. Included are the original chip conveyor and a FMB 3-36 turbo bar feeder. Also included: Büchele SFB-301 high-pressure unit, 150 bar, 4 valves. Rbedpjvtmalefx Ad Tet

Stanje: rabljeno, Article: Clamping heads Brand: Various manufacturers Rjdpfxjn H Nzuo Ad Tsbt For multi-spindle automatic lathes, used or new Please contact us for further information and pictures via email (at) or *

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Technical Specifications: Cone Rolling Machine Working width: 1050 mm Max. bending capacity for mild steel St40: 4.0 mm Rbjdpfx Ajw An Uhed Tot Diameter of conical upper roll: 70 - 185 mm Diameter of lateral and central lower rolls: 105 mm Cone bending device Mobile control panel with digital display Hydraulic drop-end bearing CE marking Motor power: 5.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tons Condition: Very lightly used, as-new condition The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Stanje: dober (rabljeno), Leto izdelave: 2022, CNC Lathe Manufacturer: DMG MORI Machine Model: CLX 350 V1 Control: SLIMline 0i-F Plus Fanuc Touch Year of Manufacture: 2022 Controlled Axes: X / Z TECHNICAL DATA Turning length: 540 mm Spindle: Motor spindle 11/16 kW Tool mounting: VDI30, 12 positions Main spindle: AC motor - Speed: up to 5,000 rpm - Spindle nose: Main spindle A2-6" - Drive power (100/40% duty cycle): 11 / 16.5 kW Turret: 12-position - Driven: 12 stations - Toolholder: VDI 30 FEATURES + Technology cycle for applying alternating spindle speed for vibration-sensitive clamping + Direct measuring system X-axis + Programmable positioning and pressure force + Ergonomic DMG MORI SLIMline® operator panel + Hollow chuck cylinder, max. bar capacity D65 mm + Tailstock, hydraulically traversable via M-function + External electronic handwheel + Chip disposal package: - Chip conveyor with right-hand discharge instead of chip tank + 4-color signal lamp Rbjdpjw Hxi Defx Ad Tet + Differential pressure chucking for main spindle + Foot pedal for tailstock + Automatic NC tailstock for maximum machining flexibility – full control of force within range 0.7 – 3.5 kN + High-pressure pump 12 bar + Coolant spray gun 5 bar + Manual tool measurement device in work area, make MARPOSS + Mechanical oil mist separator type AFS 600 Technical data and specifications may be subject to changes and errors.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 720 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: TNC 640, največja hitrost vrtenja: 15.000 obr/min, General Spindle: Direct drive Speed: 15,000 rpm Power: 34 kW Torque: 180 Nm Tool holder: SK 40 Tool changer: 90 stations Working Area Travel X: 720 mm Travel Y: 600 mm Travel Z: 500 mm Rotary/tilting table: D = 700 mm Table load: 350 kg C-axis resolution: 0.001 degree Other Rapid traverse X/Y/Z: 36 m/min Max. rotary speed B-axis: 25 rpm Rbjdpfetpm Niox Ad Tet Max. rotary speed C-axis: 25 rpm Equipment Chip management: Chip conveyor Coolant supply: ICS 40 bar Workpiece measurement: Renishaw OMP 40 Tool measurement: BLUM laser bridge Software: Kinematic Optimizer

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, INDEX MS22-8 Izdelano 2021 (v obratovanju od 2022) Dvojni NCU Rbjdowt Unvepfx Ad Tst (2) sinhrona vretena Samodejni podajalnik palic MBL, dolžina 3,3 metra Ocenjene delovne ure: 10.000 Za celotne tehnične specifikacije nas kontaktirajte.

Stanje: rabljeno, Leto izdelave: 2014, Technical details: Rjdpjt Uw Avjfx Ad Tobt Maximum grinding diameter: 3-220 mm Regulating wheel width: 500 mm Maximum grinding wheel width: 500 mm Approximate machine weight: 16 t Required installation space: approx. 12 x 10 x 8 m Minimum/maximum grinding wheel diameter: 420-610 mm Grinding wheel diameter x width - internal: 304.8 x 500 mm Regulating wheel diameter min./max.: 300-350 mm The machine is currently configured for plunge grinding. Centerless grinding with automation and PPM Marposs; Güdel Grinding with JUPITER means centerless cylindrical grinding, optionally also with CBN. JUNKER combines this grinding method with CBN grinding wheels, resulting in significant productivity advantages, especially for high-volume production, due to the long service life of the grinding wheels. In addition, simultaneous material removal over the entire workpiece length allows for significantly reduced machining times in both mass production and small batch sizes. JUPITER Grinding Processes There are two forms of centerless grinding: through-feed grinding and plunge grinding. Both processes can be performed with the JUPITER series. Typical applications for through-feed grinding: Bolts and bearing bodies, large rings, small rings, piston components (e.g., for compressors), shafts with constant diameter, piston rods (e.g., for shock absorbers), small pistons for hydraulics and injection, precision wires and rods, piston pins. Typical applications for plunge grinding: Rotor shafts, gearbox components, bearing surfaces of camshafts, tube sections for assembled camshafts, universal joints, needle parts for injection systems, valve stems, barrel rollers.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 21.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S4E184001, premer struženja nad prečnim suportom: 430 mm, stružna dolžina: 670 mm, premer struženja: 220 mm, izvrtina vretena: 45 mm, največja hitrost vretena: 6.300 obr/min, skupna masa: 4.300 kg, Rabljeni CNC stroj za trdo struženje s protivretenom Proizvajalec: EMCO Tip: Emcoturn 45E Leto izdelave: 2018 Delovne ure: malo Krmiljenje: Siemens 828D Število pogonskih orodij: 12 kosov Rsdsw Rrvwepfx Ad Tebt Največje število vrtljajev: 0–6000 min⁻¹

Stanje: rabljeno, Leto izdelave: 2007, Turning diameter: 300 mm Swing diameter over bed: 430 mm Swing diameter over carriage: 300 mm Control: SIEMENS, SINUMERIK 840 D Travel - X: 160 mm Travel - Z: 510 mm Max. part length: 480 mm Main spindle bore: 53 mm Main spindle speed: 0 - 7000 rpm Spindle nose: DIN 55026 A2-5 Spindle torque: 100 Nm Main spindle motor: 15 kW Sub-spindle bore: 53 mm Sub-spindle speed: 0 - 7000 rpm Spindle nose: DIN 55026 A2-5 Spindle torque: 100 Nm Sub-spindle motor: 15 kW C-axis resolution: 0.001° C-axis rapid traverse: 1000 rpm Tool turret: 1 x 12 stations Number of driven tool stations: 1 x 12 Tool holder: cylindrical shank (DIN 69880) VDI 25 Driven tool speed: 0 - 8000 rpm Torque: 16 Nm Power: 4 kW Feed force X/Z axis: 4000 / 6000 N Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 30 m/min Total power requirement: 38 kVA Machine weight: approx. 4 t Machine dimensions (L x W x H): 2.65 x 1.84 x 2.32 m Accessories: collet chuck 173 E on main spindle, collet chuck 163 E on sub-spindle, bar feeder manufacturer FMB, type turbo 3-36/3200 A, year 2018 for bar diameters up to 36 mm and bar lengths up to 3200 mm; various tool holders for turret (no driven holders), coolant system Redswx R Rkepfx Ad Tsbt