CNC stružnica

DMG MORI NLX 2000 SY/500

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar diameter of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with 2 high-performance spindles with a 66 mm bar capacity, 2 turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis for both upper and lower turret. A 35-bar high-pressure coolant system with filtration and an additional tank is included. Please refer to the attached brochure for further details or contact us directly. Lsdpoxmhdnjfx Aacjhc Equipment: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Coolant washing nozzle - TA/06000/10 coolant chiller, 8000 W - Machine status light - Tool life management - Tool load monitoring - Programmable automatic part catcher (pneumatic) - The parts extractor is equipped with a pneumatic gripper for part removal (opens and closes pneumatically) - Pneumatic ejector for sub spindle with 100 mm adjustable stroke, end position detected by sensor - Coolant supply through right-hand spindle - Interface for bar loader (unimag) - Preparation for extraction unit, connection flange Ø100 The machine is supplied with chip conveyor, coolant unit and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information available on request.

Leto izdelave: 1990, Stanje: dober (rabljeno), CNC 4th Axis Make: NIKKEN Type: CNC-200 Year: 1990 with tailstock and base plate. Lhjdpfogabu Uex Aacec

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machinable length: 200 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 8,000 [rpm] - Spindle drive power: 1.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 10 - Number of driven positions: 5 - Driven tool speed: 5,000 [rpm] FRONT TOOL POST Ledpfeuhazgsx Aacshc - Number of positions: 4 SUB OPERATIONS - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Footprint: 2,110 x 1,085 [mm] - Machine height: 1,832 [mm] - Machine weight: 2,200 [kg] MACHINE HOURS - Operating hours: 32,264 [h] ACCESSORIES - Controller: Meldas - Driven guide bushing - Parts catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: FMB MINIMAG 20

Leto izdelave: 2002, Stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line Ljdjhzbipepfx Aacjhc CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Stanje: rabljeno, Leto izdelave: 2011, Mazak HC Nexus 5000-II Mazatrol Matrix Nexus Letnik: julij 2011 Velikost palete: 500 x 500 mm Pomiki: - X: 730 mm - Y: 730 mm - Z: 740 mm Ljdpfx Asv Tvh Sjacehc Hitrost vretena: 12.000 vrt/min Izmenjevalec orodij: 40 pozicij Transporter ostružkov: kromiran

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1974, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1276, CNC vroče radialno kovanje GFM SX-13 Lhedpfjq U R T Nex Aacoc Leto izdelave: 1974 / 2022 Nova krmilna enota PLC SIEMENS S7 Številka stroja: 1276 Število kladiv: 4 Kovalna sila posameznega kladiva: 160 ton Število udarcev kladiva na minuto: 700/min Dolžina kladiva: 240 mm Območje nastavitve premera: 80 mm Največji premer za kovanje: - Konstrukcijsko jeklo, okrogel prerez: Ø 130 mm - Kvadratni prerez: Ø 115 mm Najmanjše dimenzije za kovanje: Ø 25 mm Maks. hod manipulatorja A: 6820 mm Maks. hod manipulatorja B: 7150 mm Največja dolžina obdelovanca: 6000 mm Hitrost manipulatorja pri hitrem pomiku: 400 mm/s Skupna priključna moč: 300 kW, 380 V, 50 Hz Dimenzije stroja: Višina kovanja nad tlemi: 615 mm Skupna višina stroja nad tlemi: 1665 mm Skupna dolžina stroja: 32.670 mm Skupna dolžina temeljev: 33.400 mm Skupna širina stroja (brez pomožne opreme): cca 3885 mm Skupna širina temeljev: 16.000 mm Skupna masa stroja: 84.000 kg

Stanje: rabljeno, Leto izdelave: 1969, Wheel diameter - max. 160,175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Centre distance between centres 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Axis distance between cutter and workpiece - max. 138 mm Axis distance between cutter and workpiece - min. 30 mm Milling head - swivelling 120° Cutter speeds 70 - 400 rpm Ljdpfovzhf Sox Aacehc Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Change gears - Milling arbors - Clamping devices - Documentation

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 650 mm, pomik po osi Z: 550 mm, največja hitrost vrtenja: 12.000 obr/min, skupna masa: 7.500 kg, For sale: CNC 5-axis machining center, brand DMG, model DMU 60 P The machine is fully functional and ready for immediate use. In 2021, a new spindle was installed and all maintenance work has been carried out. History: 2019: New ball screw (KGT) 2021: New spindle 2022: Single-shift operation 2023: Occasional job orders 2024: Taken out of operation but still connected to the power supply 12/2025: Disassembled, cleaned, and placed into storage Technical data: X-axis travel: 600 mm y-axis travel: 650 mm z-axis travel: 550 mm Control system: Heidenhain TNC 426 Spindle speed range: max. 12,000 rpm Spindle drive power: 15 kW Max. torque: 130 Nm Tool holder: SK 40 Table diameter: 630 mm Lsdowbhq Hepfx Aacehc Max. table load: 500 kg Number of tool stations: 60 positions Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 m/min Feed speed: 20 - 10,000 mm/min Total power requirement: 44 kVA Space requirement approx.: 7.0 x 6.0 x 2.7 m Machine weight approx.: 7.5 t No chucks or vices are included in the offer. Transport and loading can be organized throughout Europe upon request and for an additional charge. Prices are quoted plus VAT. Viewing by appointment is possible. Contact us—our team will be pleased to assist you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you planning to sell your machine? For further information or to contact us, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, DOOSAN PUMA 400LMA FANUC 32i (Jahr 2011) HAUPTSPEZIFIKATIONEN: - CNC FANUC 32i mit 10,4” LCD-Farbdisplay und Manual Guide - Umlaufdurchmesser über Bett: 770 mm - Umlaufdurchmesser über Schlitten: 590 mm - Max. Drehdurchmesser: 560 mm Ledpsyb Sqpefx Aacehc - Max. Drehlänge: 2.064 mm - X/Z-Verfahrwege: 357 mm / 2.155 mm - Stangendurchlass: 90 mm - Hydraulisches Spannfutter Durchmesser 400 mm - Spindel: 22 kW / 3.000 U/min (ASA A2-8) - BMT 75P Revolver mit 12 Stationen und angetriebenen Werkzeugen - Angetriebene Werkzeuge: 7,5 kW 3.000 U/min INKLUSIVE AUSSTATTUNG: - S-HS-12 Hydraulikspannfutter Durchmesser 305 mm mit Backensatz - C-Achse 360º (0,001º) - Automatischer Werkzeugvermesser - Programmierbarer Reitstock - Hochdruckpumpe 14,6 bar - Späneförderer - Vorbereitung für hydraulische Lünette (Sockel, Logik, Hydraulik) - SMW SLU X-4-ZS Hydraulik-Lünette Durchmesser 30-245 mm - Komplettes Halterset mit 4 Innen-, 4 Außen- und 4 angetriebenen (2 winkel- und 2 gerade)* - Satz Handbücher und Dokumentation ZUSTAND: Maschine in EXZELLENTEM Zustand, unter Strom in Barcelona zur Besichtigung.

Stanje: novo, Leto izdelave: 2025, največja hitrost vretena: 8.000 obr/min, hitrost vretena (min.): 8.000 obr/min, 1 Mehrspindel-Drehautomat TORNOS SAS16-DC im Wiederaufbau - neuer Schaltschrank SIEMENS oder FANUC, wählbar Lhsdpfx Aaeugl S Iscoc – Abholtisch mit Bremse – verstellbarer Anschlag mit Gegenbetrieb – 3 unabhängige Vorschubsysteme – mehrere Werkzeughalter und Bohrvorrichtungen – Trommelstangenführung mit Unterstützung – Optionen: automatischer Stangenlader IEMCA PRA, numerisches Gewindeschneiden, CNC-Querschlitten, etc. Kontaktieren Sie uns.