5-osni obdelovalni center

DMG MORI DMC 40 eVo

Stanje: rabljeno, Leto izdelave: 2012, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 500 mm, Travel range: X / Y / Z = 600 / 500 / 500 mm NC rotary table 600 x 500 mm B-axis swivel range: -5° to +110° C-axis: 360° Maximum load capacity: 400 kg, direct measuring systems incl. table cooling Dynamic package: Linear drive in X / Y axis Rapid traverse X / Y / Z: 80 m/min Acceleration X / Y / Z: 10 m/s² Ledpjyc Tthefx Aacerh Active cooling for main spindle, linear drive, and table Control: Siemens 840D SL Operate Spindle: 20 - 24,000 rpm, HSK-A63 according to DIN 69893 • Tool magazine: chain-type magazine with 60 positions • Tool length measurement and breakage control: Blum Z-Nano • Scraper belt chip conveyor with cleaned slotted screen, internal coolant supply (IKZ) paper filter 40 bar, 231 l/min, 600 l tank, incl. rotating viewing window, sealing air for linear systems, bed flushing • Air blast through spindle center selectable via M function, maintained air with low oil content • Electronic handwheel • Spray gun for chip flushing • Extended chip flushing • Laminated safety glass windows for work area door and side window • Operating mode 4 • High speed settings • Probe: Blum HSK-A63 • Preparation for 3D QuickSet • Possible oil mist extraction system • New spindle installed at 25,800 spindle hours

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 8.185 h, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, največja hitrost vretena: 18.000 obr/min, število osi: 5, This 5-axis DMG DMU 60 evo Linear machining center was manufactured in 2013, featuring travels of 600/500/500 mm, a spindle speed up to 18,000 rpm, and a 60-position tool magazine. It is equipped with a Heidenhain iTNC 530 control unit, internal coolant supply at 40 bar, and a chip conveyor with hinged belt. Ideal for complex machining tasks. Contact us for more information about this machine. Ledpfxsx D Dyae Aacorh • Tool magazine: 60 positions • Rapid traverse: 80 m/min • Dynamic package • Internal coolant: 40 bar • Swiveling observation window • Bed flushing system with rinse gun • Operating hours: 14,471 h • Spindle hours: 8,185 h Additional equipment • Hinged belt chip conveyor • Paper band filter, 600 liters • Oil and emulsion mist separator • Heidenhain TS 649 touch probe • 3D quickSET tool kit Technical Specification Tool taper: HSK 63

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.250 mm, premer struženja nad prečnim suportom: 500 mm, premer struženja: 390 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 450 mm, pomik osi Y: 200 mm, pomik po osi Z: 1.300 mm, prehod palice: 65 mm, skupna višina: 2.700 mm, skupna dolžina: 7.000 mm, skupna širina: 3.000 mm, skupna masa: 12.000 kg, Oprema: dokumentacija / priročnik, Manufacturer: DMGMORI Model: CTX beta 1250 TC Year of manufacture: 2008 (Retrofitted in 2022) Control: Siemens 840D Solutionline Number of axes: 5-axis Equipment: - Automatic tool changer - Swivel head as B-axis - Belt filter system with high-pressure coolant system and chip conveyor - Differential pressure clamping for main / counter spindle - Workpiece pick-up device - Preparation for bar feeder (available as an option) Technical specifications: Max. turning diameter: 500 mm X-axis: 450 mm Y-axis: 100 mm Z-axis: 1300 mm B-axis: 220° Spindle bore: 65 mm Spindle speed: 5,000 rpm Spindle power: 34 kW Counter spindle speed: 6,000 rpm Counter spindle bar capacity: 52 mm Counter spindle power: 20 kW Tool changer: 24 stations B-axis interface: HSK 63 B-axis spindle speed: 12,000 rpm B-axis spindle power: 22 kW Installation dimensions approx. L 7000 / W 2300 / H 2300 mm Weight approx. 8,000 kg Lredpfx Asubyv Rjaceh Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Options: • Full enclosure • NC swivel head as B-axis • Coolant unit and chip conveyor • Documentation • Geometric accuracy within new machine tolerances Condition: - Machine fully functional - Geometry within the manufacturer’s tolerances for new machines - All wear parts replaced Retrofit 2022: - Z1 and Z2/3 linear guides replaced - Y-axis linear guide replaced - Main and counter spindle overhauled - Milling spindle overhauled - B-axis (bearings and clamping) replaced - Slide covers overhauled - Hoses and cables overhauled, drag chains serviced - Cabin doors repainted, viewing windows replaced - Maintenance carried out according to manufacturer’s specifications

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 1.400 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.450 mm, pomik osi Y: 700 mm, pomik po osi Z: 550 mm, hitro pomikanje X-os: 42 m/min, hitri pomik os Y: 42 m/min, hitri pomik na osi Z: 42 m/min, največja hitrost vretena: 14.000 obr/min, CNC: Heidenhain 640 Lredpfx Aoya Imqoacoh DELOVNO PODROČJE Os X: mm 1.450 Os Y: mm 700 Os Z: mm 550 Hitri pomiki (X/Y/Z): m/min 42 Največja hitrost vretena: vrt/min 14.000 Vpenjalo orodja: SK 40 Kapaciteta orodjarnika: 30 Dimenzije mize: mm 1.760 × 750 Največja obremenitev mize: kg 2.000 OPREMA: • CNC HEIDENHAIN 640 • Bralnik DXF datotek • Priprava za četrto os • Prednastavitev orodij • Heidenhain merilna sonda za merjenje obdelovanca • Visokotlačna hladilna naprava skozi vreteno 40 bar s papirno filtrirno posodo, kapaciteta 600 litrov • Hladilna miza • Klimatska enota • Orodjarnik s 30 mesti • Navodila za uporabo in CE izjavo o skladnosti

Stanje: zelo dobro (rabljeno), X 885, Y 800, Z 500 mm, A 30-120°, C 360°. HSK 63 Big Plus, 15.000 obr/min, ATC 60 pozicij, Renishaw tipalo, Heidenhain TNC 530. Ledpfx Aaewzv Igecorh

Stanje: rabljeno, Leto izdelave: 2013, Technical Details: Turning diameter: 38 mm Item: CNC Turning Machine Make: Hanwha Model: STL38H Year of manufacture: 2013 Control: Siemens 840SL for 8 axes Main spindle: Max. turning diameter: 38 mm; spindle bore max. 42 mm; max. speed: 6,500 rpm Max. power: 23 kW; C-axis with 0.001° increments; Z1 travel: 320 mm; synchronous running guide bush unit; guide bush type: JBS or SL38; collet type: 173E / F48 Sub spindle: Max. pick-off diameter: 38 mm; max. speed: 6,500 rpm Max. power: 23 kW; C-axis with 0.001° increments; Z2 travel: 320 mm; collet type: 171E / F42 Turret: Max. speed: 6,000 rpm Max. power: 2.6 kW; servo axes: X2, Y2, Z2; stroke [mm]: X2 = 115, Y2 = 100, Z2 = 120 Bar feeder: FMB Turbo 5-55 High-pressure unit: SFB-301 eco 150 bar Please contact us for further information and pictures via email (at) or Lrsdjtv Sdfspfx Aacjh *

Stanje: zelo dobro (rabljeno), CNC stružnica DMG CLX 450 V3, letnik 2018, Siemens, v zelo dobrem stanju Lsdpfx Aaox Hqh Secsrh

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2006, CNC univerzalni rezkalni in vrtalni stroj DECKEL MAHO DMU 80 P duoBlock Z vodenjem poti MILL PLUS iT Letnik: 2006 Pomiki: X 800 Y 800 Z 800 Območje vrtljajev: 0 – 8.000 min⁻¹ brezstopenjsko (SK 50) Z naslednjo opremo: NC okrogla miza 900 mm x 700 mm vpenjalna površina (max. obremenitev mize 1,4 t) Univerzalna rezkalna glava z gnano osjo B Univerzalni menjalec orodij z 40 mesti v magazinu, dvojni grabilnik (SK 50) Polna zaščitna kabina z drsnimi vrati in notranjo osvetlitvijo Lrodpfxoxn Aczs Aacjh IKZ – 40 bar Transporter za ostružke Rotoclear 3D merilna tipala Heidenhain TS 641 Način delovanja 3 + 4 Elektronski ročni kolešček 50 kosov držal orodij SK 50 3 kos nastavljive strojne noge po višini Transportna oprema Navodila za uporabo

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, A DMG Mori CNC vertical machining center including Lang pallet handling system is available. 1) DMG Mori, year of manufacture: 2014, travel ranges X/Y/Z: 650mm/520mm/475mm, rapid traverse: 36m/min, spindle speed: 14,000rpm, spindle power: 24kW/16kW, tool holder: HSK-A63, tool stations: 30, table dimensions X/Y: 900mm/570mm, machine dimensions X/Y/Z: approx. 3900mm/3400mm/2600mm, weight: approx. 6250kg, control: Heidenhain TNC 640, operating hours: 28,250h, spindle hours: 13,116h. 2) Lang Eco Compact 20 pallet automation system, year of manufacture: 2018, pallet capacity: 20, loading arm reach: 1200mm, footprint X/Y: 2000mm/2000mm. The turntable at the doors is defective. Documentation is available. On-site inspection is possible. Ledpfx Ajwpk Anjacsrh

Stanje: rabljeno, Leto izdelave: 1979, Premer kolesa - maks. 1000 mm Širina kolesa 180 mm Lredpfx Aoyb S H Djacsh Modul - maks. 7 Modul - min. 0,5 Hod bata - min. 16 mm Hod bata - maks. 180 mm Izvrtina mize 160 mm Skupna potrebna moč 4 kW Teža stroja pribl. 5,2 t