Vodoravni stroj za struženje

DMG MORI CTX 2000

Stanje: rabljeno, Leto izdelave: 2015,

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 850 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 610 mm, premer struženja nad prečnim suportom: 500 mm, premer struženja: 725 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 260 mm, pomik osi Y: 80 mm, pomik po osi Z: 610 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 30 m/min, dolžina podajanja os X: 260 mm, dolžina pomika po osi Y: 80 mm, dolžina podajanja os Z: 610 mm, vrtilni moment: 250 Nm, prehod palice: 65 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned/milled parts. - Integrated spindle motors - Counter spindle, water-cooled (preloaded roller guides), with Y-axis on main and counter spindle - Latest control technology: SINUMERIK ONE with ShopTurn conversational programming. Main Spindle: • Max. bar capacity: 65 mm • Max. torque: 250 Nm • Speed range: 0-5000 rpm Counter Spindle: • Drive power: 22 kW • Max. torque: 130 Nm • Speed range: 0-7000 rpm Turret: • 12-position VDI 30 turret, radial, with direction logic for up to 12 driven tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm Rbedpfx Ajx E Dncsd Tet - Max. speed: 5000 rpm Y-axis: • Travel: +/- 40 mm • Hollow clamping cylinder incl. draw tube • C-axis for main/counter spindle • SINUMERIK ONE / OPERATE control • 22" multi-touch display • SHOPTURN • 3D simulation • Remnant detection • USB interface • Control cabinet air conditioning • Coolant system incl. coolant pump (3.5 bar) • Chuck wash (additional pump, 3.5 bar) • Parts ejector and coolant through counter spindle • Hydraulic unit • Interface for chip conveyor • Documentation and CE certificate Control language: German/English Electronic handwheel EMCO tool breakage and wear monitoring / SINUMERIK ONE Alternating spindle speed Counter spindle as tailstock: Enables the use of the counter spindle with installed live center for workpiece support. This allows shaft parts to be supported and machined, even on machines without a tailstock, using the counter spindle. Maximum thrust force is limited to 50% of the maximum axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for connecting robots (HARTING connector, Profinet communication, dual-channel/potential-free safety signals). Digitalization package for Sinumerik: Condition monitoring SIEMENS ONE interface for connection to MDE/BDE systems. Standard features include: • Machine on – AUX ON • Automatic mode • Production mode – program active • Program running and override between 95%–105% • Piece count pulse (M30) • Programmable pulse (M300) 3D machine data / MT65-G2: 3D machine data model included Pneumatically operated finished part catcher for gentle unloading of finished parts: Finished parts are transported either to a catch box (standard) or conveyor belt (optional). Max. finished part length: 175 mm Max. finished part diameter: 65 mm Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connecting the SL1200 short bar feeder from EMCO. ...and more. Machine is available immediately!

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: nepreverjeno, številka stroja/vozila: 73136, potovalna razdalja osi X: 1.350 mm, pomik osi Y: 1.150 mm, pomik po osi Z: 720 mm, nazivna (navidezna) moč: 64 kVA, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC 530, skupna višina: 3.150 mm, skupna dolžina: 5.605 mm, skupna širina: 4.290 mm, skupna masa: 12.600 kg, hitrost vretena (min.): 15.000 obr/min, delovne ure vretena: 21.786 h, število mest v zalogovniku orodij: 46, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of Manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in operational condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 touch probe. Operating Hours (read): Control on: approx. 112,194 h Machine on: approx. 72,272 h Spindle on: approx. 21,786 h Programs: approx. 21,654 h Condition: Used machine with typical signs of wear, technically functional. Inspection under power possible by arrangement. Working Areas Travel paths: X-axis: 1350 mm Y-axis: 1150 mm Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Spindle Standard spindle 15,000 rpm Speed range: 0–15,000 rpm Acceleration time to max. speed: approx. 2.5 s Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) Torque: 193 Nm (S6 = 40% duty cycle) Tool holder: HSK-A63 (DIN 69063-1, option ISO-B40/DIN 69871) Max. tool diameter: 130 mm (fully equipped) Bearing: Ceramic hybrid Ø 70 / Cronidur-St Lubrication: Lifetime-lubricated Cooling: Water with corrosion protection Feed Drives Feed motors: AC Rapid traverse/Working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle per hour) Position measuring systems X/Y/Z: Linear scales (direct) Rotary Table Clamping surface: Ø 1100 × 1000 mm, flattened on the side Table load: 1600 kg T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm spacing) Location bore: Ø 50 H6 Clamping torque: 8000 Nm Max. moment of inertia: 75 kg·m² Table stroke above floor: 1120 mm Table drive: Torque motor, direct Drive torque: 1600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) NC swivel range: +16° to −120° Measuring system: direct, absolute Clamping principle: hydraulic, stepless Max. swivel speed: 4000 °/min Max. working swivel torque: 600 Nm (S6 40%) Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer 46-position magazine (installed as per documentation) Magazine positions: 46 Tool holder: HSK-A63 (DIN 69063-1), option ISO-B40 Max. tool diameter: 80 mm fully equipped 130 mm partially equipped Rodpfx Ajx Eh Iqed Tsbt Max. tool length: 300 mm Max. tool weight: 8 kg Magazine loading: 200 kg Chip-to-chip time (vertical): 11 s Coolant / Chip Removal External coolant supply (AKZ): 40 l/min, 2.5 bar Internal coolant supply (IKZ) Electrical Data: Installed nominal power: 75 kW Power connection: 58 kW Connection rating: 64 kVA Control voltage: 24 V DC Operating voltage: 3 × 400 V, 50 Hz Protection class: IP54 Dimensions & Weight Machine weight: approx. 12,600 kg (without accessories) Space requirement (L × W × H): 5605 × 4290 × 3150 mm

Stanje: novo, POPOLNOMA NOVO OBDELOVALNO SREDIŠČE HEIDENHAIN TNC 7 digitalno tirno krmiljenje z 19" zaslonom HEIDENHAIN paket (motorji, merilni sistemi in ročno kolo) X-os: 650 mm Y-os: 700 mm Z-os: 645 mm Premer mize: 410 mm Maksimalni premer obdelovanca: 500 mm Maksimalna hitrost vretena: 12.000 min⁻¹ (oljno hlajeno z MMS) Vpenjalna glava vretena: SK 40-BIG PLUS (BVD 40) Maksimalna moč vretenskega motorja: 17 kW IKZ – notranja dovod hladilne tekočine – 20 bar Hitri pomiki X,Y & Z: 30.000 mm/min Natančnost pozicioniranja: ± 0,005 mm Ponavljivost: ± 0,003 mm Menjalec orodij z dvojno roko: 30-kratni (opcijsko do 80 orodij) Transporter ostružkov z verižnim trakom Popolno ohišje Rsdpfx Ashy Artod Tebt Odgovarjamo le na povpraševanja iz Nemčije / Le povpraševanja iz Nemčije bodo obravnavana

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), The following units are available: one Rehm Invertig Pro 350 AC/DC and one Rehm Invertig Pro 450 DC, both used and in good condition. 1) Invertig Pro 350 AC/DC Standards: IEC 60 974-1, IEC 60 974-2 Welding current range (TIG): 3–350A Output voltage U₂ (at maximum current): approx. 24V Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% (for TIG at 350A) Mains voltage/input: 3-phase, 400V, 50Hz Protection class: IP 23S, safety class S Adjustment range: 3–350A (TIG) for AC/DC version Duty cycle: 100% at 40°C, 350A (TIG), 100% DC Input fuse: 32A at 3x400V for the 350 AC/DC version Dimensions: length 520mm, width 360mm, height 460mm Weight: 29.5kg (AC/DC version) 2) Invertig Pro 450 DC Standard: IEC 60 974-1 Welding current range (TIG): 3–450A Output voltage U₂ at maximum current: approx. 28V Rjdexddamepfx Ad Tobt Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% at 450A (TIG); for electrode welding, duty cycle is lower (approx. 60%) Mains/input: 3x400V, 50Hz Protection class: IP 23S Duty cycle at 100% DC, 450A (TIG) at 40°C Electrode welding current: approx. 360A at 100% DC (electrode) for the 450 DC version Power/input fuse: 32A at 400V (three-phase) for the 450 versions Dimensions: length 520mm, width 360mm, height 460mm Weight: approx. 28kg On-site inspection is possible.

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 0000, Angebot überholte FAT Drehmaschinen in Fabriksgeometrie, geschliffene Führungen durch FAT, neue Elektrik usw. TUR 630 M x 2000 oder TUR 630 M x 3000 TUR 630A x3000 oder TUR 630A x 4000 mit Spindelbohrung 140 mm und 2 Futter 400 mm Bison Maschinen lieferbar 3 - 4 Monate nach Auftrag Zubehör nach Kundenwunsch STOCKLISTE NEUE BISON FUTTER Futter in Original-Holzkisten ===== 1 X 4344-630-8 1 X 4344-315-11 1 X 4334-630-8 1 X 4334-500-6 1 X 3204-160 1 X 4305-800 (BACKEN) 1 X 3244-400-8 1 X 3544-400-11 3 X 4344-400-6 1 X 3704-250-6 1 X 4344-250-6 1 X 3514-250-6 1 X 3744-400-11 1 X 3704-400 Rjdpfsnqzaisx Ad Tobt 1 X 3544-400-8 1 X 3245-400-8 2 X 4334-400-8 2 X 4344-400-8 1 X 3434-315-8 1 X 4344-200-6 1 X 3704-315 1 X 4344-250-8 1 X 3204-200 1 X 3234-200-5 Bitte Verfügbarkeit jeweils prüfen! Lieferung: EXW – NL

Stanje: dober (rabljeno), Universal milling head, milling holder, milling extension, angle milling head - Manufacturer: Waldrich - Spare part: removed from a milling machine - Milling head: swiveling - Quill stroke: 150 mm Rbedpfx Ajfxlf Ajd Tst - Spindle taper: SK50 - Motor: 11 kW, 1470 rpm - Spindle speed: 25 - 560 rpm - Transport dimensions: 1550 x 600 x H460 mm - Weight: 636 kg

Stanje: dober (rabljeno), Leto izdelave: 2010, Ref. No.: 10287 Manufacturer: DMG Model: DMC 210 FD Year of Manufacture: 2010 Controller Type: CNC Controller: Heidenhain Mill Plus Location: Halberstadt Country of Origin: Germany X Travel: 2,100 mm Y Travel: 2,100 mm Z Travel: 1,250 mm Machine Length: 11,000 mm Machine Width: 5,000 mm Machine Height: 3,500 mm Max. Workpiece Diameter: 2,500 mm Max. Workpiece Weight: 6,000 kg Max. Rotary Table Diameter: 1,850 mm Table Speed Range: 250 rpm Tool Holder: HSK-A100 Tool Magazine with: 183 pcs. Spindle Speed: 12,000 rpm Max. Drilling Spindle Torque: 288 Nm Max. Torque: 2,000 Nm Feed Rate X/Y/Z Axis: 30,000 mm/min Max. Workpiece Height: 1,460 mm Axes: 5 Additional Information: Turning and milling center incl. pallet changer system Gear-driven spindle with 1,800 Nm Coolant preparation system with belt filter, 710 x 50 mm 1 chip conveyor Knoll 600S2 2 Losma oil mist separators 1 steel platform (storage area for clamping devices), approx. 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoders, electrical components replaced - Geometry logs available Rbsdoxxn Ukspfx Ad Tet The machine is still in production and under power. The machine can be inspected at any time by appointment.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, obratovalne ure: 50 h, številka stroja/vozila: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3,100 kg Overall dimensions: 230 x 155 x 170 cm Rsdpfx Aow T Sd Tjd Tebt Installed power: 13 kVA Customs code: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Centre distance: 650 mm Grinding capacity (SpW+bs): 80 Travel: 700 mm LONGITUDINAL SLIDE Max. stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Feed rate: 50–5,500 mm/min Reversal delay: 0–6 sec Max. table swiveling angles: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max. stroke: 300 mm Rapid traverse: 60 mm Plunge depth in diameter: 3.4 mm Feed rate 1: 0.012–6 mm/min Feed rate 2: 0.012–1.2 mm/min Feed per pulse: 0.001–0.05 mm GRINDING WHEELHEAD Left-hand wheel, external grinding: 400 x 80 x 127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s Spindle speed: 1,670 / 2,110 rpm Internal grinding attachment for belt-driven spindles, incl. drive unit: 1.5 kW WORKHEAD Swivel range: 0–90° Infinitely variable spindle speed: 30–1,000 rpm Internal taper: Morse 5 Clamping collets: W-25 Drive power: 0.55 kW Max. workpiece weight between centers: 130 kg Air grinding load capacity: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Precision adjustment for cylindricity correction: ±40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of generator over 630 mm: 0.003 mm Roundness for air grinding: 0.0003 mm CONNECTION VALUES Max. absorbed power: 13 kVA Max. permissible voltage fluctuation: -15% / +10% Max. permissible frequency fluctuation: ±3% Required compressed air pressure: 5 bar Technical specifications provided without obligation and subject to change. Errors and omissions excepted.

Stanje: dober (rabljeno), Leto izdelave: 2022, CNC Lathe Manufacturer: DMG MORI Machine Model: CLX 350 V1 Control: SLIMline 0i-F Plus Fanuc Touch Year of Manufacture: 2022 Controlled Axes: X / Z TECHNICAL DATA Redpfx Adew Hxi Do Tobt Turning length: 540 mm Spindle: Motor spindle 11/16 kW Tool mounting: VDI30, 12 positions Main spindle: AC motor - Speed: up to 5,000 rpm - Spindle nose: Main spindle A2-6" - Drive power (100/40% duty cycle): 11 / 16.5 kW Turret: 12-position - Driven: 12 stations - Toolholder: VDI 30 FEATURES + Technology cycle for applying alternating spindle speed for vibration-sensitive clamping + Direct measuring system X-axis + Programmable positioning and pressure force + Ergonomic DMG MORI SLIMline® operator panel + Hollow chuck cylinder, max. bar capacity D65 mm + Tailstock, hydraulically traversable via M-function + External electronic handwheel + Chip disposal package: - Chip conveyor with right-hand discharge instead of chip tank + 4-color signal lamp + Differential pressure chucking for main spindle + Foot pedal for tailstock + Automatic NC tailstock for maximum machining flexibility – full control of force within range 0.7 – 3.5 kN + High-pressure pump 12 bar + Coolant spray gun 5 bar + Manual tool measurement device in work area, make MARPOSS + Mechanical oil mist separator type AFS 600 Technical data and specifications may be subject to changes and errors.