Horizontalni stružnici DMG Gildemeister NEF 600 2008

DMG Gildemeister

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 43.558 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 07400003691, premer struženja: 120 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 118 mm, model krmilnika: SIEMENS SINUMERIK 840 D POWERLINE, razdalja med vreteni: 900 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within one of the following timeframes: between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. Nkodpfx Agoym A S Ie Teu TECHNICAL DETAILS Maximum main spindle speed: 5,000 rpm Maximum sub spindle speed: 3,200 rpm Swing diameter: 270 mm Turning diameter: 120 mm Maximum bar diameter: 100/104 mm Spindle bore diameter: 118 mm Spindle distance: 900 mm X1-axis travel: 290 mm Z1-axis travel: 650 mm X2-axis travel: 180 mm Z2-axis travel: 650 mm Y1-axis travel: ±40 mm Z3-axis travel: 670 mm X3-axis travel: 175 mm Rapid traverse speed X/Z-axis: 30 m/min Rapid traverse speed Y-axis: 15 m/min Number of tool turrets: 2 Number of tools per turret: 12 All turret positions are powered MACHINE DETAILS CNC control: SIEMENS SINUMERIK 840 D POWERLINE Dimensions & Weight Dimensions (L x W x H): 5,500 x 2,500 x 2,500 mm Machine weight: 11,000 kg Operating hours: 88,040 h Spindle hours: 43,558 h EQUIPMENT Chip conveyor Foot switch Note: The machine has the following defects: - The B-axis is defective (located on turret 1) - Guideways and drives show age-related wear - The X2-axis (guide rails) runs slightly misaligned by approx. 0.03 mm (re-measurement required) - Setting axis reference values in the controller does not work - After hydraulic pump failure, a replacement pump was installed and is now operating as a separate unit outside the machine External reference: Bilstein – Lot 2

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, obratovalne ure: 39.361 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 07510001241, stružna dolžina: 1.185 mm, premer struženja: 640 mm, največja hitrost vretena: 12.000 obr/min, teža obdelovanca (maks.): 150 kg, model krmilnika: SIEMENS SINUMERIK 840 D, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the machine within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Swing diameter: 640 mm Maximum turning diameter: 640 mm Maximum turning diameter (sub spindle): 400 mm Spindle distance: 1,500 mm Turning length: 1,185 mm Max. workpiece weight: 150 kg Slide travel X1: 550 mm Slide travel Y1: 180 mm Slide travel Z1: 1,185 mm Slide travel B1: 240° Slide travel X2: 180 mm Slide travel Z2: 1,050 mm Slide travel Z3: 1,150 mm Max. milling spindle speed: 12,000 rpm Max. main spindle speed: 4,000 rpm Max. sub spindle speed: 3,200 rpm Rapid traverse speed, Slide 1 (X/Y/Z): 40 / 24 / 70 m/min Rapid traverse speed, Slide 2 (X/Z): 24 / 36 m/min Rapid traverse speed, Slide 3 (Z): 36 m/min Tool interface: HSK 63 Number of tool positions in chain magazine: 40 MACHINE DETAILS Control: SIEMENS SINUMERIK 840 D Nkjdpfjym A D Rox Ag Tsu Dimensions & Weight Dimensions (L x W x H): 7,800 x 4,100 x 3,040 mm Machine weight: 16,500 kg Operating hours: 72,899 h Spindle hours: 39,361 h Bar feeder Model: COCCHE GIOVANNI CNC-DB 110 Year of manufacture: 2008 Serial number: CNCDB-08.306 Weight: 1,500 kg Note: The machine has the following defects: - The hydraulic unit is faulty and needs to be repaired - The Q2 axis (milling spindle tool changer) malfunctions frequently - The X2 axis (guide rails) is slightly misaligned - Guides and drives are worn consistent with age External Reference: Bilstein- Lot 1

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, DMG Gildemeister CTX 500 Alpha V6 - Letnik izdelave: 2011 - Krmiljenje: Siemens 840D shop turn - Protipremer - z Y-osjo in C-osjo - Revolver: 12-pozicijski motoriziran VDI 30 Nksdpfeylkuujx Ag Tju Dodatna oprema: - Hidravlična vpenjalna glava - Transportni trak za odrezke - Naprava za hlajenje - Vmesnik za podajalnik palic - Lovilec obdelovancev s transportnim trakom

Stanje: rabljeno, CNC Lathe DMG MORI SEIKI - GILDEMEISTER Type CTX 310 ecoline Machine No. 8044001846E Year of manufacture: 2013 CNC control: SIEMENS Sinumerik 840D sl Swing diameter over bedway cover: 330 mm Nodpfx Ageyk Hrgj Tjku Swing diameter over cross-slide cover: 260 mm Center height max.: 190 mm Distance between centers max.: 580 mm Turning diameter max.: 200 mm Longitudinal slide travel (Z-axis): max. 450 mm Cross slide travel (X-axis): max. 160 mm Spindle bore (draw tube): 51 mm Spindle bore (front bearing): 100 mm Spindle speed max.: 5000 rpm Feed rate X and Z: mm/min Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Feed force X and Z: 4500 Nm Tool turret: 12 stations Driven tool stations: 6 stations Tool holder: cylindrical VDI 30 mm Spindle drive motor power at 100% duty cycle: max. 11 kW Spindle drive motor power at 40% duty cycle: max. 16.5 kW Electrical connection: 400 Volt, 50 Hz, 21 kVA - CNC Control SIEMENS Sinumerik 840D sl, system software NCU V04.04+SP02+HF02 - Controlled C4-axis (chuck position) and C1 axis for tool turret - 3-jaw chuck AUTOGRIP Ø 210 mm with 1 set hard jaws and 15 sets soft jaws - Hydraulic hollow clamping device AUTOGRIP - Tool turret SAUTER, type 0.5.901.020 with 12 stations (6 driven) - 20 VDI 30 tool holders - Tailstock MK 4 - Indirect measuring system via rotary encoder - Chip conveyor with integrated coolant system - Workpiece remaining time display and piece counter as large display on machine housing - Control cabinet cooling unit - 9716 total operating hours (main switch on), thereof 3322 spindle hours (per counter) - Operating instructions and manuals Footprint machine with chip conveyor: L x W x H 4500 x 2600 x 2050 mm Space requirement base machine: L x W x H 2900 x 2150 x 2050 mm (3200 kg) Space requirement chip conveyor: L x W x H 3350 x 850 x 1650 mm (500 kg) Weight approx. 4 tons Very good condition

Leto izdelave: 2008, Stanje: pripravljen za uporabo (rabljen), Main spindle: max. bar capacity: 65 mm, draw tube bore: 75 mm, collet chuck diameter: 160 mm, centering chuck diameter: 175 mm, spindle nose: 140 mm, max. speed: 5,000 rpm, nominal torque (S1): 150 Nm, nominal power (S1): 22 kW. Counter spindle: draw tube bore: 45 mm, centering chuck diameter: 175 mm, spindle nose: 140 mm, max. speed: 5,000 rpm, nominal torque (S1): 100 Nm, nominal power (S1): 16.8 kW. W2 axis (counter spindle): travel: 690 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. X1 axis: travel: 165 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. Z1 axis: travel: 220 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. X2 axis: travel: 165 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. Z2 axis: travel: 150 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. X3 axis: travel: 165 mm, max. speed: 40 m/min, max. acceleration: 10 m/s², nominal feed force (S1): 2,400 N. Z3 axis: travel: 678 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. Y3 axis: travel: 80 mm (+50/-30), max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. Workpiece unloading (UA-WA): max. unloading weight: 4 daN, max. unloading diameter: 70 mm. Total number of tool stations: 12, tool holder diameter: 30 mm, driven positions: 12, max. speed of driven tools: 4,000 rpm, nominal torque (S1-n = 0 rpm): 17 Nm, nominal power (S1-n = 4,000 rpm): 2.9 kW, control: Siemens 840D, operator panel: ErgoLine, screen: color TFT 19", number of spindles (C-axes): 2, number of axes: 10, number of channels: 4. Total operating hours: 70,035 h powered on, 48,657 h in production, machine operates with cutting oil. Complete with documentation and bar feeder FMB Turbo 8-80 XT 3200. On-site inspection is possible. Nkjdpsyln Ekefx Ag Teu

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, obratovalne ure: 7.100 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 650 mm, premer struženja nad prečnim suportom: 350 mm, premer struženja: 385 mm, hitrost vretena (min.): 4.500 obr/min, izvrtina vretena: 67 mm, potovalna razdalja osi X: 255 mm, pomik po osi Z: 800 mm, For sale: Used DMG NEF400 V3 5th Generation ISM 2-axis universal lathe with C-axis. Travel distance: X: 255 mm Z: 800 mm Swing diameter over bed: 385 mm Maximum swing: 350 mm Turning length: 650 mm Equipment: - Main spindle with integrated spindle motor - Speed: Max. 4,500 rpm - Drive power: 8.0 / 11.5 kW (100/40% duty cycle) Nedpsxzqnrsfx Ag Teku - 12-position disc turret VDI30, 6 driven positions - C-axis and spindle brake (hydraulic) - Automatic tailstock, MK4 taper, Travel: 680 mm - CNC control Siemens 840D Solutionline with ERGOline Control, Sinumerik Operate, and ShopTurn 3G - Operating system: Linux - Technology cycle for applying alternating spindle speed for vibration-critical setups - Manual tool measurement system in work area - Hydraulic power unit - Coolant spray gun - Mechanical oil mist separator - Reinforced coolant pump, 12 bar, 23 l/min - Chip conveyor, discharge height 1,250 mm to the right - Bar machining package including: - Workpiece pick-up device with conveyor to the left for parts max. 65 mm diameter, 150 mm length, weight up to 3 kg - Hollow chucking device, draw tube inner diameter max. 67 mm - Interface for bar loader magazine - Foot switch for tailstock activation - Hydraulic 3-jaw chuck SMW-AUTOBLOK RMS sensor (Relocation Machine Security) Machine available immediately! Machine is ready for operation! We will load the machine for you! Transport can be arranged upon request!

Stanje: rabljeno, Leto izdelave: 2011, Technical Details: Turning length: 310 mm Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Nsdpfxow S Efzs Ag Teku Centre distance: 500 mm X-axis travel: 190 mm Z-axis travel: Z1: 335 / Z3: 370 mm Y-axis travel: 80 mm Spindle speed: 6,000 rpm Control: Heidenhain CNC Pilot 4290 Spindle bore: 73 mm Bar capacity: 50 mm Tool turret - Number of stations: 12 Tool holder: VDI 30 mm Rapid traverse X & Z axes: 30 m/min Operating hours (power on): 36,443 h Operating hours (spindle): 8,545 h Interface: yes Total power requirement: 20 kVA Chip conveyor dimensions (LxWxH): 3.2 x 0.45 x 1.5 m CNC Slant Bed Lathe Includes a 3-jaw chuck Ø160 mm with matching flange (max. speed 4,500 rpm) and 2 additional sets of replacement jaws. 12-station turret, all tool positions with live tooling; Sauter disc turret (C-axis = 300 rpm). Main spindle torque: 95 Nm at 100%, 127 Nm at 40% Chip conveyor: 450 K-1/250; Year of manufacture: 2000 Electrical cabinet with Rittal cooling The machine does not feature a hydraulic chuck; a manual chuck has been installed by the previous owner. The machine is offered for sale as non-functional. There is an unknown malfunction in the turret, therefore reference runs and axis movements are not possible. Thus, machining operation is currently not possible. The machine is for sale as in need of repair! i.D.

Stanje: zelo dobro (rabljeno), Monitor Display (108142) Manufacturer: DMG Gildemeister Nksdpfxoigqr Hs Ag Tsu Type: Supply 11098, I.D. No.: 259284 The monitor was removed from a machine with mechanical damage. Functionality has been tested.

Stanje: rabljeno, Leto izdelave: 2006, Stružnica DMG Gildemeister CTX 210 Nkodjyhlzujpfx Ag Tju Leto izdelave: 2006

Stanje: rabljeno, Manufacturer: DMG Gildemaster Country of Manufacture: Italy CNC Control: FANUC 16i-TB with 7 axes CE Declaration of Conformity Technical Data - Number of axes: 7 - Number of spindles: 2 Travel distances: X1 axis: ±30 mm Z1 axis: 120 mm Y1 axis: 195 mm X2 axis: 30 mm Z2 axis: 180 mm MAIN SPINDLE - Max. bar diameter: 12 (13) [mm] - Travel: 120 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 3.7 [kW] - Torque: 6 Nm SUB SPINDLE - Max. bar diameter: 12 (13) [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 3.7 [kW] - Torque: 6 Nm Driven tools: Nedpfx Ajygl N Njg Tjku - Tool drive power: 1.1 kW - Max. speed: 6,000 rpm IEMCA SMART 316 bar loader Chip conveyor Machine dimensions: approx. 2043 x 1200 x 1750 [mm] Machine weight: approx. 2,200 [kg] Main spindle and sub spindle newly fitted!