Varilna miza

demmler Profi PlusLine(PL) D 28

Stanje: novo, Leto izdelave: 2025, nosilnost: 1.000 kg, various very heavy-duty welding tables, machined, partially plasma-nitrided Fodpfxjwu Exzj Apropk Sizes: - 1 x 1 meter, €1,500 - 1.2 x 1.2 meters, €1,700 - 1.5 x 1.5 meters, €1,900 - 2 x 1 meter, €2,300; plasma-nitrided €3,300 - 2.4 x 1.2 meters, €2,900; plasma-nitrided €3,900

Stanje: dober (rabljeno), Leto izdelave: 1956, Heavy-duty lathe, lathe, engine lathe, geared head lathe, screw-cutting lathe - Manufacturer: Weisser, Geared Head Lathe Type PF200 Fpsdpfx Apstzf N Rsrjk - Turning length: 1340 mm - Swing over bed: 420 mm - Swing over cross slide: 240 mm - Spindle bore: Ø 41 mm - Spindle speeds: 31.5 - 1400 rpm - Three-jaw chuck: Röhm Ø 250 mm - Accessories: included, see photos - Tailstock taper: MT4 - Drive motor: 2.5/3.5 kW - Dimensions: 2670/1000/H1230 mm - Weight: 1450 kg

Stanje: rabljeno, Leto izdelave: 1992, Sheet width: 2050 mm Sheet thickness: 10.0 mm (steel) Bending capacity: 8.0 mm (steel) Top roller diameter: approx. 205 mm Side roller diameter: approx. 195 mm Control: conventional Oil capacity: 80.0 liters Voltage: 380 V Total power requirement: 5.5 kW Weight: 3200 kg Dimensions (L x W x H): 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll plate bending machine Fsdpexacdvefx Aprjpk - 3-roll concept enables a wide range of bending and rounding operations - Swiveling control unit at the front * Operation and control of all rollers and machine axes * Digital position display * Manual operation via joysticks - Bending diameters of up to 1.1 times the top roller diameter possible - Forged and hardened rolls with a strength of 53-55 HRC - Low-maintenance, stable machine design - Heavy-duty steel welded construction - Electro-hydraulic drop-end for easy removal of rolled pipes - Manometer / pressure gauge for the rolls - Safety device (safety cable with switch unit) - Operating manual (PDF)

Stanje: novo, Leto izdelave: 2024, stiskalna sila: 175 t, delovna širina: 3.050 mm, For sale is a high-performance DURMA press brake, model AD-S 30175, equipped with an extensive range of standard features and selected options, making it ideally suited for demanding metalworking applications. Standard equipment: - Capacity and size: 3050mm x 175 tons Fsdpfx Asrx Rkusprjpk - Installation height: 530mm - Throat depth: 450mm - Stroke: 265mm - Axis control: Precise 4-axis control. - Safety systems: Manual F. AKAS FPSC safety system, CE F.AKAS BVLT light guards, and safety enclosures ensure maximum operator protection. - Backgauge: Servo-driven backgauge with linear guides and recirculating ball screw for maximum precision. - Tool clamping system: European standard for quick and secure tool changes. - Front support arms: Adjustable, supporting the handling of various workpiece sizes. Selected options: - Control upgrade: SKY 22 – 3D, enabling even more detailed bending operations and 3D visualization. - Crowning: Motorized adjustment for even more precise bending results. - Backgauge: Extended with motorized X and R-axis backgauge (X=650mm), for increased flexibility and accuracy. - Quick clamping: Manual quick-release clamping for more efficient tool changes. This DURMA press brake is ready to support your production with its advanced technology and reliable performance. It is the ideal choice for companies that value precision, efficiency, and safety. For further information or if you are interested, please contact us. Don’t miss the opportunity to expand your manufacturing capabilities with this high-quality machine.

Stanje: rabljeno, Leto izdelave: 1997, The press brake was manufactured in 1997 in England at the EDWARDS PEARSON factory. The bending press is in good condition and is being sold complete with tooling. It has always been serviced and maintained on schedule. The machine is connected and can be demonstrated or inspected on site. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3,100 mm Fodjrfx Utopfx Apropk Bending force: 100 t Stroke: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1, Z2, R Tooling: Included Weight: 7 t Other: Newly replaced display, connected keyboard for easier operation. If you have any further questions, we will be happy to assist you.

Leto izdelave: 2016, stanje: delavnici obnovljeno (rabljeno), For sale is 1 hood-type dishwasher from Meiko, model DV 80.2, manufactured in 2015/16. Condition: Good, partially operated with soft water. No dosing unit included! These machines are former lease units. Various equipment configurations available, potentially with internal water softening, GIO module, or completely without softening. Please let us know how you would like your package configured. The listed price is a base price depending on configuration—request your individual quote! Includes 6 months spare parts warranty. Preventive maintenance was always conducted, including replacement of various wear parts. Viewing and test-run on site possible and encouraged. Technical data: Capacity: up to 60/40/17 racks (equals approx. 1080/720/306 plates or e.g. 2160/1440/612 glasses) per hour Cycle times: 60/90/210 seconds Rack size: 500 x 500 mm Entry height: 440 mm Tank volume: 22 l Water consumption per rack: 2.6 l Tank heating: 1.3 kW Boiler: 7.5 kW (cold water) Fpedpfep Ebn Dox Aprjk Boiler: 9.0 kW (hot water) Material: Stainless steel Connected load: 400 V / 11.2 kW (cold water), 9.7 kW (hot water) Dimensions (WxDxH): 635 x 750 x 1470/2050 mm Electrical installation: Electrical connection: Three-phase, 3 NPE, 400 V, 50 Hz. The wiring complies with VDE regulations. Water installation: The dishwashers can be connected directly to the fresh water supply without the need for additional safety fittings. Minimum flow pressure: 0.6 bar, maximum pressure: 5 bar. Please comply with installation guideline EN 1717. Drain: ¾". On-site wall drain max. 700 mm high. Connection hoses length approx. 1.8 m from the dishwasher. Collection of the machines is preferred. Shipping by freight forwarder possible at buyer’s expense.

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Electrode force: 100 daN, welding power: 255 kVA, rated output: 80 kVA, with DALEX DRF 5.2 cooling system. Fpsdpfx Aeiknv Esprjk

Stanje: novo, Press brake tools/punches for Trumpf press brake H 256 mm, L 500 mm, L 550 mm, in segments Fpsdpsiimz Rjfx Aprok

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 570 mm, izvrtina vretena: 62 mm, stružna dolžina: 1.250 mm, premer struženja nad ležiščem sani: 365 mm, višina središča: 280 mm, skupna masa: 4.000 kg, O F F E R We can offer you, subject to prior sale and errors excepted, ex stock without obligation: V D F - BOEHRINGER Cycle-Controlled Universal Lathe Fpodpfsyqw Eqjx Aprjk Model DUS 560 Year of manufacture 1998 / completely overhauled in 2008 --- Centre height 280 mm Max. swing diameter over bed 570 mm Max. swing diameter over cross slide 365 mm Cross slide/traverse travel 345/125 mm Distance between centres / max. turning length 1,250 mm Spindle bore 62 mm Infinitely variable spindle speeds, 2 ranges 3-500 / 15-2,500 rpm Infinitely variable longitudinal and cross feeds 0.01-50 mm/rev Rapid traverse longitudinal/cross 5 / 10 m/min Max. feed force cross/longitudinal 6.5 / 12.5 kN Max. workpiece weight between centers/with tailstock 400 / 1,000 kg Thread pitches 0.1 – 400 mm/pitch Spindle drive 15/21 kW Total drive 25 kW – 400 V – 50 Hz Weight approx. 4,000 kg Accessories / Special Equipment: • SIEMENS 2-axis cycle control Type 805 with direct input of all turning parameters via interactive interfaces and corresponding software; control and monitor integrated in the sliding door; with memory expansion and software for free contour programming, graphics, etc. • 2 electronic handwheels for fine adjustment of carriage travel in Z and X axes, and new joystick for rapid traverse +Z/-Z and +X/-X; Joystick for the main spindle with infinitely variable speeds – forward and reverse • Mounted 3-jaw chuck Model SCA Ø 300 mm, faceplate approx. Ø 500 mm, 4-jaw chuck Ø 315 mm, driving plate approx. 250 mm, single faceplate 500 mm, various jaws. • Mounted MULTIFIX toolpost Type CD with 5 different Multifix holders • Separate tool block for CAPTO tool holders with internal coolant supply, various holders partly with collet chucks • Tailstock with air bearing for easy movement, work lamp • Movable chip trolley with coolant pump and oil skimmer, 2 rear sliding doors • Separate control cabinet, adjustable spindle end stop, work lamp, etc. Condition: very good – guides in very good condition, available for demonstration under power Please click here for a video of the machine: Delivery: ex stock – as inspected Payment: strictly net before delivery We look forward to your order. More lathes of all sizes available in stock – please inquire.

Stanje: rabljeno, Power source for orbital welding unit MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding system MESSER GRIESHEIM - POLYSOUDE RC200 Welding power supply, inverter welder POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Serial no. (welding source): 9885186 Serial no. (cooling unit): 97861? Output: 200 amps = 20% duty cycle Fjdpfx Aot Awm Doprjpk 90 amps = 100% duty cycle Mains supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours read off - Operating and maintenance manual Space requirements welding unit (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight of welding unit: 45 kg Weight of cooling unit: 25 kg Good condition Without accessories Price is for a set consisting of 1 x power source and 1 x water cooler.