2x STÜCK-Ergotech - sistem 250/280-80

DEMAG

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, skupna višina: 13.450 mm, skupna širina: 4.135 mm, skupna dolžina: 3.092 mm, nosilnost na odsek shranjevanja: 400 kg, vhodna napetost: 400 V, nosilnost: 400 kg, Automated Warehouse Optimization Storage System Schäfer Logimat System Type: Logimat 3625 – 815 – 13.450/400 Serial No.: 916.0480-B2 (Logimat 5) Year of Manufacture: 2016 Total Load Capacity: 2 x 30,000 kg Load per Tray: 400 kg (evenly distributed) Tray Dimensions: 3625 x 815 mm Number of Trays (approx.): 91 units Touchscreen: 15.6 inch Shuttle Dimensions (W x D x H): 4135 x 3092 x 13,450 mm Power Supply: 400V-50Hz, 3L/N/PE, 24 A, 17 kVA This offer is valid subject to prior sale. Technical details per Logimat unit: - Maximum total capacity of the Schäfer Logimat: 2 x 30,000 kg - Maximum number of trays (approx.): 91, each 400 kg, evenly distributed - Tray dimensions: 3625 x 815 x 100 mm - Tray dead weight: 70 kg - Machine dimensions (W x D x H): 4135 x 3092 x 13,450 mm - System footprint (approx.): 12.8 m2 - Capacity with 91 trays: approx. 269 m2, each tray approx. 2.95 m2 - Average tray retrieval time: 26 sec - Maximum tray retrieval time: 26 sec - Average tray changeover time: 51 sec - Maximum tray changeover time: 72 sec - Machine weight without trays: 5,200 kg - Equipped with LogiTilt - Equipped with LogiPointer - Equipped with LogiGate - Equipped with LogiStainless Machines have been professionally dismantled and can be reassembled by the same technicians if desired. Photos and videos of operation and dismantling are available on request via email. Price: special export price Price: excl. VAT Delivery time: in stock We have 3 Schäfer Logimat units in stock. Machinehandel De Leeuw BV specializes in used paternoster systems from manufacturers such as Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau Chjdpfx Aeru A Atefqef The Netherlands

Leto izdelave: 1990, Stanje: rabljeno, Pressure: 75 t Outreach: 300 mm Stroke: 8 – 110 mm Table surface: 750 x 600 mm Ram adjustment: 75 mm Ram surface: 430 x 230 mm Through-hole in table: 250 x 150 mm Pin hole in ram: 40 mm Stroke rate: 60 + 90 strokes/min Machine weight: approx. 4.4 t Total power requirement: 4.5 – 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram with stroke down, ram down: 19 mm Distance table/ram with stroke up, ram up: 380 mm Equipment: - With hydraulic clutch-brake combination, new hydraulics and oil cooler - With gear train in oil bath - Fixed table prepared for mounting of tool change consoles - 2 roller strips in the table - Mechanical overload protection in ram (shear plate) The following works are carried out on the machine / Partial overhaul: - Machine completely disassembled, inspected, seals replaced, defective parts exchanged, etc. - Machine repainted - New Balluff cam switch Cjdpfxsd Nl E Us Afqehf - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication system - New control cabinet with touch panel and ABB safety control - Current UVV safety inspection with brake time measurement

Leto izdelave: 2000, Stanje: pripravljen za uporabo (rabljen), SINGLE-SCREW EXTRUDER GRAEWE-FANGLI 60X33 Application: PE PIPES or PP PIPES Type: 60 X 33 Year of manufacture: 2000 Screw diameter: 60 mm Drive power: 75 kW Output capacity (PE): approx. 200 - 250 kg/h Condition: Good, ready for operation The extruder is my property Sachal Extrusion Machines Bahnhofstrasse 6 Chsdeifgwhspfx Afqef D-26345 Bockhorn/Grabstede Germany

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1978, Universal tool milling machine Make: DECKEL Model: FP 2 stepless Year of manufacture: 1978 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2202-10147 with warranty Geometric acceptance with inspection protocol Accessories: - 3-axis digital readout HEIDENHAIN ND 780 - Universal table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Central lubrication, manual - Coolant system - Operating manual Chedpfjfcqfpjx Afqsf - used, as seen -

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Machine Type: Vertical Machining Center Manufacturer: DMG MORI Model: CMX 600 V Year of Manufacture: 2020 Control: 840D SL Slimline Multi Touch Operate 4.7 Country of Origin: DE- Delivery Time: by arrangement Basis of Delivery: ex works Technical Details Travel X-axis: 600 mm Travel Y-axis: 560 mm Travel Z-axis: 510 mm Control: 840D SL Slimline Multi Touch Operate 4.7 Main Spindle: Max. Speed: 12,000 rpm Main Spindle Drive Power: 13 / 9 kW Max. Torque: 82 / 54 Nm Tool Holder: SK 40 Distance Spindle Nose to Table: 120 - 630 mm Work Table: Clamping Surface: 900 x 560 mm Max. Table Load: 600 kg T-slots: 5 Working Height: 850 mm Tool Magazine: Number of Tool Stations: 30 pos. Tool Holder: SK 40 Max. Tool Diameter: 80 mm Max. Tool Diameter with Free Adjacent Slot: 130 mm Max. Tool Length: 300 mm Max. Tool Weight: 8.0 kg Tool-to-Tool Change Time: 2.4 sec Chip-to-Chip Time: 6.7 sec Feed Rates: Rapid Traverse: 30 m/min Feed Force: 5 kN Max. Feed Rate: 30,000 mm/min Total Power Requirement: 32 kVA Approx. Machine Weight: 5.0 t Approx. Space Requirement: 4.0 x 5.0 x 3.0 m Accessories Documentation Chip Conveyor Coolant System High-pressure Coolant 12 bar Internal Coolant Supply Electronic Handwheel Chedpfxorwi Swo Afqsf Signal Lamp – 4 colors Measuring Probe PP40 Tool Measurement

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Turning-milling center Takisawa TMM 250 3, year of manufacture 2016, Fanuc control Turning length: 1300 mm Chodpfjrt Ip Nex Afqof Turning diameter: 350 mm Spindle speed (max.): 4000 rpm 9 axes 2 x spindles 2 x C-axis Swing diameter: 780 mm Max. turning diameter: 350 mm Max. turning length: 1,300 mm Chuck diameter left: 250 mm Chuck diameter right: 200 mm Upper tool carrier with Y-axis 260 mm and B-axis 230° / +/- 115° Complete with 30-position tool changer Lower tool turret: 15-station revolver – all positions driven Fully simultaneous 5-axis machining with turning/milling support. Tool changer with 30 stations Workpiece magazine, right side of the machine, with gantry handling Driven tools at the turret C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle, 20 bar Due to excessive administrative expenses (customs regulations), we do not deliver to Turkey, Iran, Russia, or Belarus.

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 3.916 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 667183, skupna masa: 1.154 kg, nosilnost: 210 kg, doseg roke: 3.096 mm, Offered for sale is a KUKA KR210 R3100 Ultra KRC4. 3,916 operating hours We also offer a complete overhaul. Chedeqaitvjpfx Afqsf

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Clamping force: 275 t, injection weight: 455 g, cylinder diameter: 55 mm, max. opening stroke: 850 mm, weight: 20 t, operating hours: approx. 63,000 h, including documentation, a set of new pumps, and GEIGER LR 16 EC handling unit. The handling unit should be overhauled. Cedpfxoiiv Aqj Afqehf

Stanje: zelo dobro (rabljeno), Here we offer you a Zwick / Roell tensile testing machine (table-top testing machine). Zwick / Roell Materials Testing Machine Model: BDO-FB0.5TH Chodpfx Afed Sr S Isqef - Load testing in tension/compression direction: 500 N - Height: 1565 mm, Width: 292 mm, Depth: 469 mm - Width of test area: unlimited - Test area depth: 100 mm - Max working stroke without accessories: 1266 mm - PC or printer interface: RS 232 - Required PC connection (for PC operation): COM 1 - Power specifications: 115/230 V (PH, N, PE) - Rated power: 0.4 kVA - Mains frequency: 50/60 Hz - Weight: 47 kg - Type: BDO-FB0.5TH - Condition: used - Scope of delivery: (see pictures) (Subject to change and error in technical data and specifications!) If you have any further questions, we are happy to answer them by phone.

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), A Boy injection moulding machine is available. Clamping force: 100 kN, tie bar distance (diagonal): 205 mm, max. platen opening: 250 mm, ejector stroke: 50 mm, screw diameter: 14 mm, shot volume range: 1 cm³ / 15.3 cm³, machine dimensions L/W/H: approx. 1500 mm / 550 mm / 1400 mm, weight: approx. 500 kg, control system: Procan ALPHA. Documentation available. Inspection on site possible. Codpfx Ajv Ext Iofqjhf