Stroj za brizganje

DEMAG Ergotech System 80/420-430

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Demag Ergotech-System 250/280-80 Schließkraft 25 t Ljdshrw Amepfx Abbjrg Schnecke 25 mm Baujahr 2003 Angussentnahmeroboter 2 Stück

Stanje: dober (rabljeno), Leto izdelave: 2006, Clamping force: 250 tons Tie bar spacing: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Max. diameter: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm³ Lodsrgw Exepfx Abberg Shot weight: 482 g Injection pressure: 2426 bar Cores: 2 Hot runner: 12 + Demag ergotech W733-0174 robot Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max. reach: 1000 mm (X-axis), 900 mm (Y-axis), 1400 mm (Z-axis), 2500 mm

Stanje: rabljeno, Leto izdelave: 2001, Clamping force: 250 t Ljdpfx Asvbbvkjbbsrg Screw diameter: 70 mm Tie bar spacing (vertical): 630 mm Tie bar spacing (horizontal): 630 mm Design: Horizontal Drive: Hydraulic

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), A selection of used injection moulding machines is available. 1) Demag Concept 80/370-200, clamping force: 80t, screw diameter: 30mm, year of manufacture: 2006. 2) Demag Concept 80/370-200, clamping force: 80t, screw diameter: 30mm, year of manufacture: 2006. 3) Demag ET 150/500-610h/120v multi, clamping force: 150t, screw diameter: 50mm/25mm, year of manufacture: 2003, operating hours: approx. 100,000h. 4) Demag ET 150/500-610h/120v multi, clamping force: 150t, screw diameter: 50mm/25mm, year of manufacture: 2006, operating hours: approx. 105,000h. 5) Engel VC 740/150 electric, clamping force: 150t, screw diameter: 50mm, year of manufacture: 2006, operating hours: approx. 103,000h. 6) Engel VC 740/150 electric, clamping force: 150t, screw diameter: 50mm, year of manufacture: 2006, operating hours: approx. 103,000h. 7) Engel VC 740/150 electric, clamping force: 150t, screw diameter: 50mm, year of manufacture: 2006, operating hours: approx. 103,000h. 8) Engel VC 740/150 electric, clamping force: 150t, screw diameter: 50mm, year of manufacture: 2006, operating hours: approx. 67,000h. 9) Engel VC 940/200 electric, clamping force: 200t, screw diameter: 60mm, year of manufacture: 2007, operating hours: approx. 98,000h. 10) Engel VC 740/150 electric, clamping force: 150t, screw diameter: 50mm, year of manufacture: 2006, operating hours: approx. 103,000h. 11) Demag ET 200-560-840 concept, clamping force: 200t, screw diameter: 60mm, year of manufacture: 2000. 12) Demag ET 200-560-840 concept, clamping force: 200t, screw diameter: 60mm, year of manufacture: 2001. 12) Demag ET 200-560-840 concept, clamping force: 200t, screw diameter: 60mm, year of manufacture: 2002. 13) Engel VC 940/200 electric, clamping force: 200t, screw diameter: 60mm, year of manufacture: 2006, operating hours: approx. 107,000h. Documentation available. On-site inspection is possible. Sale of individual machines possible. Lrsdpfx Absv R Ew Djbog

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 878 0730, vpenjalna sila: 2.500 kN, razmak između stupova: 630 mm, minimalna višina orodja: 330 mm, izmetalna sila: 69.000 N, hod izmetalca: 200 mm, odmični hod: 675 mm, dolžina plošče: 950 mm, širina plošče: 950 mm, skupna dolžina: 6.500 mm, skupna širina: 1.900 mm, skupna višina: 2.300 mm, skupna masa: 13.100 kg, ogrevalna zmogljivost: 27 kW (36,71 KM), pritisk: 190 letvica, moč črpalke: 4.500 W, moč: 72 kW (97,89 KM), vrsta vhodnega toka: Klimatska naprava, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, vhodni tok: 167 A, Oprema: dokumentacija / priročnik, Technical Specifications – Demag Ergotech 250/630–1450 Clamping unit Clamping force: 2,500 kN Tie bar spacing (W × D): 630 × 630 mm Max. opening stroke: 675 mm Minimum mould height: 330 mm Maximum mould height (with WA): 710 / 830 mm Platen size (H × V): 950 × 950 mm Max. mould weight: 3,300 kg Max. weight of moving mould half: 2,200 kg Ejector stroke: 200 mm Ejector force: 69 kN Injection unit Screw diameter: 50 / 60 / 70 mm Injection pressure (at 400 °C): 2,426 / 1,905 / 1,400 bar Shot volume: 530 / 763 / 1,040 cm³ Shot weight (PS): 480 / 690 / 940 g Heater capacity (cylinder): 14.8 / 23.1 / 27.0 kW Lrsdpfx Aew Hq Hhobbog Drive & Power supply Pump motor rating: 37 / 45 kW Total installed power: 52 / 60 / 64 / 72 kW Supply voltage: 3×400 V Frequency: 50 Hz Max. current consumption: 167 A Dimensions & Weight Total length: 6,500 mm Total width: 1,900 mm Total height: 2,300 mm Net machine weight: 13,100 kg

Stanje: rabljeno, Leto izdelave: 2009, Brizgalni stroj Sumitomo Demag IntElect 210/580-1000, letnik 2009 (brez prikazane manipulacije / temperirnih naprav / oskrbe z materialom [lijak, dozirnik]). Lredpfxew E N S Hj Abbog Demag 210: premer polža Ø 50 mm - Sumitomo Demag IntElect 210/580-1000, letnik 2009: 6260 x 1555 x 2219 mm (DxŠxV), neto masa 11.000 kg Oznaka SGM Delovne ure Števec ciklov Ogrevanje cilindra Električni pogoni Sumitomo Demag IntElect 210/580-1000 27.297 25.717 3.450.308

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Demag Concept 100/420-200 Leto izdelave: 2007 Enota za brizganje: Premer polža: 25 mm Tlak brizganja: 2752 bar Prostornina hoda: 61,3 cm3 Teža brizga (PS): 54 g Najv. dozirna pot: 125 mm Enota za zapiranje: Zapiralna sila: 1000 kN Najv. hod odpiranja: 500 mm Min. vgradna višina orodja: 250 mm Najv. razdalja med pritrdilnimi ploščami: 750 mm Pritrdilne plošče: 600 x 600 mm Svetla razdalja med stebri: 420 x 420 mm Najv. teža orodja: 700 kg Oprema: Jedro vlečenja: 2x Lsdpfx Aox Uqb Iobbsrg Ogrevanje orodja: 6x Zračni ventil: 1x Vmesnik za robota Stroj se dobavlja z robotom

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, vpenjalna sila: 2.500 kN, premer vijaka: 50 mm, injekcijska masa: 482 g, skupna višina: 2.400 mm, skupna masa: 14.900 kg, This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2,500 kN, a screw diameter of 50 mm, and a maximum shot weight of 482 g. The machine offers a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking for a high-quality injection moulding machine, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600, which we are offering for sale. Please contact us for further information. • Clamping unit size: 250 • Holding force: 2,750 kN • Platen size (H x V): 930 x 930 mm • Tie bar spacing (H x V): 630 x 630 mm • Ejector retraction force: 40 kN • Injection unit (size 1600) • Screw geometry: standard • L/D ratio: 25 • Injection rate (PS, without accumulator): 530 cm³/s • Metering stroke: 270 mm • Maximum nozzle stroke: 110 mm • Material hopper capacity: 110 l Lsdpfx Absx D Nwqjberg • Electric dosing drive: 13.1 kW • Barrel heating: 14.8 kW • Dry cycle time (EUROMAP 6): 1.2 s • Dry cycle stroke (EUROMAP 6): 441 mm • Dimensions • Maximum drive projection with nozzle contact: 184 mm • Maximum drive projection with nozzle retraction: 1279 mm • Maximum shot weight in polypropylene is 482 g with a screw diameter of 50 mm Dimensions Machine depth: 6,600 mm

Stanje: rabljeno, Leto izdelave: 2007, vpenjalna sila: 420 kN, delovna prostornina: 1.212 cm³, tlak vbrizgavanja: 1.877 letvica, skupna masa: 20.000 kg, delovne ure: 53.000 h, premer polžastega transporterja: 70 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Lodexr N Urepfx Abberg Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Demag Multi 80/420-80h/120v Injection Moulding Machine Year of manufacture: 2005 TWO MACHINES AVAILABLE Machine type: Two-component injection moulding machine (2K) Control system: NC4 Control Drive type: Hydraulic Technical data – clamping unit Clamping force: 800 kN Tie bar spacing: 420 × 420 mm Lrodpfoww H S Ijx Abbeg Platen dimensions: 590 × 600 mm Minimum mould height: 250 mm Maximum mould opening stroke: 500 mm Maximum daylight between platens: 750 mm Injection unit – two-component First unit (horizontal): Nitrided screw Screw diameter: 22 mm Second unit (vertical): Bimetallic screw Screw diameter: 25 mm General data Motor power: 18.5 kW Heating power: 8.8 kW Dimensions (L × W × H): 3.9 × 1.4 × 1.9 m Total weight: 4100 kg Equipment and additional information Control language: German Complete machine history – available