Stebrni žerjav, Rotacijski žerjav 125 kg

DEMAG

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 injection moulding machine was manufactured in 2005. It features a central accumulator for high-speed injection and chrome-plated tie bars. The pump drive power is 22.0 kW, operating at a mains voltage of 400 V / 50 Hz. The machine is equipped with a colour data display featuring a VGA interface, an oil cooler, and an electric screw drive. Please inquire about the possibility to purchase this hydraulic injection moulding machine SUMITOMO SHI DEMAG El-Exis S 250/630-1450. Contact us for further information. • 5 similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mould movement • Chrome-plated tie bars at the clamping unit • Pump drive power: 22.0 kW Ihodpsx D Rqrefx Af Tjt • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate power connections for drive and heating • Control system: colour data display with VGA interface and AT keyboard interface • Injection, holding pressure and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mould and oil cooling • Compliance: basic European version, conforms to applicable safety regulations • Paint finish: bottom anthracite grey RAL 7016; upper section blue 571C MD • Elastic machine suspension • Ultrasonic position measuring system with digital data transmission for injection, ejector, mould (M) and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centring diameter (D=100/125) for the fixed platen • Mould mounting dimensions type E (similar to EUROMAP), without side ejector plate • Standard mould installation height • Safety interlock: mould opening and ejector forward only with safety gate closed • Ejector with position control via proportional valve; pressure and speed can be programmed independently • Frequency-controlled electric screw drive

Leto izdelave: 2024, Stanje: novo, Outreach: 5 m Total column height: 5.5 m Load capacity: 80 kg Hook travel: 4.3 m *NEW* Never used *Original packaging* DEMAG Pillar-Mounted Slewing Crane - Load capacity 80 kg with electric chain hoist, crane DEMAG type DCM-Pro 2 80 1/1 H4.3 V16/4 - Year of manufacture: Hook travel max. 4.3 m Ihsdevzhhtjpfx Af Tjt - Chain size: 4.2 x 12.2 RDC/TDK - Power supply: 380 - 415 V - Control voltage: 24 V

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, vpenjalna sila: 2.500 kN, premer vijaka: 50 mm, injekcijska masa: 482 g, skupna višina: 2.400 mm, skupna masa: 14.900 kg, This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2,500 kN, a screw diameter of 50 mm, and a maximum shot weight of 482 g. The machine offers a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking for a high-quality injection moulding machine, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600, which we are offering for sale. Please contact us for further information. • Clamping unit size: 250 • Holding force: 2,750 kN • Platen size (H x V): 930 x 930 mm • Tie bar spacing (H x V): 630 x 630 mm • Ejector retraction force: 40 kN • Injection unit (size 1600) • Screw geometry: standard • L/D ratio: 25 • Injection rate (PS, without accumulator): 530 cm³/s • Metering stroke: 270 mm • Maximum nozzle stroke: 110 mm • Material hopper capacity: 110 l • Electric dosing drive: 13.1 kW • Barrel heating: 14.8 kW • Dry cycle time (EUROMAP 6): 1.2 s • Dry cycle stroke (EUROMAP 6): 441 mm • Dimensions • Maximum drive projection with nozzle contact: 184 mm • Maximum drive projection with nozzle retraction: 1279 mm • Maximum shot weight in polypropylene is 482 g with a screw diameter of 50 mm Ijdpfjx D Nwqox Af Tsht Dimensions Machine depth: 6,600 mm

Stanje: dober (rabljeno), Leto izdelave: 2008, vpenjalna sila: 2.000 kN, premer vijaka: 50 mm, Oprema: dokumentacija / priročnik, Vpenjalna sila: 200 t Premer vijaka: 50 mm Ihjdpjyark Tjfx Af Tjt Razdalja med stebri (V): 580 mm Razdalja med stebri (H): 580 mm Tip: Horizontalen Pogon: Hidravlični

Stanje: rabljeno, Leto izdelave: 2003, Travel X: 930 mm Travel Y: 400 mm Travel Z: 406 mm Spindle speed: 9–6,750 rpm Table size: 1,370 x 254 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.15 mm/rev Drilling capacity in steel: 32 mm Feed range: 19–890 (X) mm/min Spindle taper: SK 40 Column overhang: 200–680 mm Total power requirement: 4 kVA Machine weight approx.: 1.15 t Space requirement approx.: 1.5 x 1.45 x 2.2 m Product Information: “Multifunction Milling Machine Optimill MF 4 Vario—Tool Milling Machine with Variable Speed” Optimill MF 4 Vario—multifunctional drilling-milling machines designed for professional applications. Electronically stepless drive control with frequency inverter “made in Germany” and digital 3-axis position display DPA 21. Heavy, robust design made of high-quality Meehanite cast iron. High concentricity accuracy with tapered roller bearings, measured at less than 0.01 mm in the quill. Automatic quill feed. Forward/reverse rotation for thread cutting. X- and Y-axes feature adjustable dovetail guideways. Coolant system. Y-axis with flat guideway. Large Y-axis travel of 400 mm. Motorized table height adjustment with rapid traverse on Z-axis. Equipment details: - Frequency inverter quality made in the EU - Drilling-milling head, tiltable ±45°, overhang 200–680 mm, spindle speeds - Stepless speed control with extra-wide speed range - Adjustable drilling depth stop with millimeter scale, easily readable on front - Safety screen, height-adjustable and generously dimensioned - Cross table: massive, large, precisely surface-machined - Motorized table height adjustment on Z-axis - Adjustable limit stops - OPTI control panel: integrated control console - Integrated digital position display DPA 21 with speed display - X-axis : motorized table feed, stepless speed control, rapid feed, forward/reverse Technical Data: Product length: 1,500 mm Product width/depth: 1,450 mm Product height: 2,200 mm Net weight: 1,150 kg Total power connection: 4 kW Electrical voltage: 400 V Phases: 3~ Network frequency: 50 Hz Max. face mill diameter: 100 mm Max. shank cutter diameter: 20 mm Vertical spindle reach: 200–680 mm Vertical spindle taper: ISO 40 DIN 2080 Vertical spindle speed range: 8 steps Vertical spindle speed control: electronically adjustable Horizontal table length: 1,370 mm Horizontal table width: 254 mm Vertical spindle to table min.: 40 mm Vertical spindle to table max.: 446 mm Horizontal table T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Horizontal table max. load: 275 kg Vertical spindle motor power (normal mode): 3 kW Coolant pump motor power: 100 W Manual X-axis travel: 930 mm Manual Y-axis travel: 400 mm Manual Z-axis travel: 406 mm Automatic X-axis travel: 850 mm Automatic Z-axis travel: 350 mm Drilling capacity steel (S235JR): 32 mm Continuous drilling capacity steel (S235JR): 28 mm Isdpfx Ajt U Rm Ijf Tjht Vertical spindle drilling head swivel range Z-X plane: ±45° Vertical spindle quill stroke: 127 mm Vertical spindle quill feed: 0.04/0.08/0.15 mm/rev

Stanje: dober (rabljeno), Leto izdelave: 2010, vpenjalna sila: 1.600 kN, Oprema: dokumentacija / priročnik, Vpenjalna sila: 160 t Premer vijaka: 40 mm Razdalja med stebri V: 520 mm Iodpfx Afeyarfdo Tjht Razdalja med stebri H: 520 mm Tip: Horizontalen Pogon: Hidravlični

Stanje: rabljeno, Električni verižni dvigalo DEMAG Tip PM 8 - Manulift Tov. št.: 5319450 Leto izdelave: 1979 Nosilnost: 80 kg Razpon kljuke: 2,9 metra Razdalja med obešanjem in kljukom za tovor: 700 mm Glavna hitrost dviga: 12 m/min. Fina hitrost dviga: 2 m/min. 1 nosilna veriga = 80 kg Ročno upravljanje Manulift neposredno na žerjavski kljuki Omrežna priključitev: 380 V, 50 Hz Ijdpfoxcbnlex Af Toht Teža: 20 kg dobro stanje

Stanje: novo, AXA cantilever swing crane, 360° rotation. Max capacity: 500 kg. Max height: 2,804 mm. Max outreach: 1,360 mm. Easily maneuverable thanks to 360° rotation and high-capacity, high-smoothness swivel castors with bumpers and parking brakes. With a front clearance of only 995 mm, it can be used in narrow aisles and confined spaces. The lifting arm is extendable to 4 different positions. Iodpfegypgdox Af Tsht

Stanje: rabljeno, prevoženi kilometri: 221.291 km, Leto izdelave: 2009, obratovalne ure: 15.356 h, Drive: Wheel Unladen weight: 22,000 kg Lifting capacity: 30,000 kg Serial number: 86584 Front tire condition: 70% Rear tire condition: 70% Transport dimensions (L x W x H): 8.3 x 2.4 x 3.45 m Ihsdpswwqbyofx Af Tet Please contact PFEIFER GROUP for further information.

Stanje: dober (rabljeno), Leto izdelave: 2012, vpenjalna sila: 2.800 kN, Oprema: dokumentacija / priročnik, Demag Systec 280/630-600 (2012) Zapiralna sila: 280 t Premer polža: 45 mm Teža brizga: 294 g Razdalja med stebri (V): 630 mm Razdalja med stebri (H): 630 mm Prostornina brizga: 323 cm3 Ihsdpfexykw Rjx Af Tst Tip: Horizontalen Pogon: Hidravlični

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 56.089 h, Premer obhodnega kroga nad ležiščem/prižemon: 820mm/550mm, razdalja med konicama: 2666mm, največji premer struženja: 610mm, največja dolžina obdelovanca: 2500mm, pomik X/Z: 410mm/2560mm, pomik Y: -80mm/100mm, največja masa obdelovanca v lebdečem stanju/s prečno prizmo: 500kg/1500kg, število orodnih mest: 12, hitri pomik X/Z/Y: 24m/30m/12m/min, sila podajanja X/Z/Y: 17kN/20kN/17kN. Dimenzije stroja X/Y/Z: ca. 5500mm/2250mm/2550mm, masa: ca. 15000kg, delovnih ur: ca. 56089. Dokumentacija na voljo. Ogled na lokaciji je možen. Predvidoma na voljo od sredine leta 2026. Ihedpfxow Dfhuo Af Tst

Stanje: rabljeno, prevoženi kilometri: 62.585 km, Leto izdelave: 2020, obratovalne ure: 5.422 h, Drive: Wheel Unladen weight: 48,000 kg Lifting capacity: 220,000 kg Serial number: 82609 Ijdpfxswk Aw He Af Tjht Front tire condition: 90% Rear tire condition: 90% Transport dimensions (L x W x H): 15.3 x 3 x 4 m Please contact PFEIFER GROUP for further information.

Stanje: rabljeno, Leto izdelave: 1988, Outreach 2,200 mm Hook height 2,600 mm Machine weight approx. 1.8 t Load capacity 1,000 kg Iedpfxog N Di Re Af Teht +++++ Please note that the machine is in a disassembled and load-ready condition. For this reason, a powered demonstration or the recording of a video is not possible. Furthermore, our listing contains the most informative and highest quality photos available. Unfortunately, it is not possible to send additional pictures. +++++

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, skupna masa: 2.200 kg, KUKA KRC4 Linear Axis 1500/3T Item number: 8143983 Serial number: 143983 The KUKA KRC4 Linear Axis is a high-precision, robust motion unit, ideally suited for industrial applications. It ensures exact control over motion sequences and plays a central role in automation processes and robotic systems within manufacturing. Its durable construction guarantees consistently reliable performance, even under the most demanding operating conditions. Ijdpsvzxg Tefx Af Teht

Stanje: rabljeno, Ročna krmilna enota DEMAG za dvoranski žerjav. Stroški pošiljanja 20 evrov. +++++ Prosimo, upoštevajte, da je stroj razstavljen in pripravljen za nakladanje. Zaradi tega prikaz pod napetostjo ali izdelava videa nista mogoča. Poleg tega naša oglas vsebuje najbolj informativne fotografije najboljše možne kvalitete. Pošiljanje dodatnih slik žal ni mogoče. +++++ Iedpfeh Hvgxox Af Toht