Sistem žerjava

DEMAG DC-COM 1/1 H5

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Teža: 4950 kg, skupna masa: 12 000 kg Nwjdswpmckopfx Ag Tjc 5,5 kW

Leto izdelave: 1997, Stanje: zelo dobro (rabljeno), številka stroja/vozila: GO 832 833, Demag ELKE overhead travelling crane, crane runway, bridge crane, indoor crane 2 units available!!! Load capacity / lifting capacity: 1.6 t / 1600 kg Track gauge: 11,785 mm, external dimension approx. 12,000 mm Nedpfx Agsum I Ako Tswc Year of manufacture: 1997 with pendant control Lifting height: 3 m Overall height from top edge of crane girder to bottom edge of hook: approx. 900 mm End carriage length: approx. 200 cm Crane is dismantled and available immediately Matching conductor rails can also be supplied. Please enquire. Very good condition, inspection logbook available Column mounted and wall mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder possible, please enquire with zip code Collection preferred

Stanje: rabljeno, Clamping Plate – Table of a Long Planer Machine – Table Width / Clamping Width: 1845 mm Njdpfx Ajbn Amfeg Tewc Table Length / Clamping Length: 5505 mm 7 longitudinal T-slots for T-slot nuts: M30 T-slot spacing: 263 mm Total length: 6230 mm Total plate height: 350 mm Weight: 11 t

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Horizontalni transportni trak URBAN - TBA26/38 HQR, 7 kosov na prodaj. Možen je tudi posamičen nakup. Nedpfstr Eqfex Ag Tswc

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation Nsdpfx Aeg Ezarjg Tswc - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 5.277 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 762 mm, pomik osi Y: 508 mm, pomik po osi Z: 508 mm, teža obdelovanca (maks.): 300 kg, širina mize: 500 mm, dolžina mize: 630 mm, skupna masa: 8.500 kg, največja hitrost vretena: 15.000 obr/min, moč vretenovega motorja: 22.400 W, nos vretena: CT 40, število mest v zalogovniku orodij: 40, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, transportni trak za ostružke, CNC obdelovalni center HAAS UMC 750 SS TEHNIČNE LASTNOSTI: Leto izdelave: 2019 Število sočasnih osi: 5 Pomik osi X: 762 [mm] Pomik osi Y: 508 [mm] Pomik osi Z: 508 [mm] Kotna pomik osi C: 360 [°] Dimenzije mize: Ø630 x 500 [mm] Maksimalna obremenitev mize: 300 [kg] Zasuk osi B: +110 [°] / 350 [°] Vrsta vretena: CT 40 Maksimalna hitrost vretena: 15.000 [rpm] Moč vretena: 22,4 [kW] Število orodij v menjalcu: 40 Kapaciteta rezervoarja za mazanje: 284 [l] Število delovnih ur: 5.277 [h] Teža: 8.500 [kg] OPREMA VKLJUČENA: x1 vreteno 15.000 [rpm] x1 hlajenje skozi vreteno x1 visokotlačna črpalka za hladilno sredstvo 21 bar x1 pomožni filter za hladilno sredstvo x1 brezžična merilna sonda za obdelovanec RENISHAW x1 kalibracijska krogla x1 merilna sonda za orodje RENISHAW x1 odstranjevalec oljne megle HAAS x1 ročno upravljalno kolo HAAS x1 transporter odrezkov HENNIG, tip 101435 Stroj je pod napetostjo na naši lokaciji, ogled možen po dogovoru. Cena po dogovoru, nakladanje na tovornjak je vključeno. Možna dostava po celem svetu. Nsdex Nf Tbopfx Ag Tjwc Podatki na tej strani so bili pridobljeni po naših najboljših močeh, zato točnost ne more biti zagotovljena. Stroj je primerljiv z Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, ter z rezkalnimi, vrtalnimi in navojnim stroji kot tudi CNC brusilnimi stroji.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.550 mm, premer struženja nad ležiščem sani: 1.550 mm, premer struženja nad zgornjim sanežem: 1.220 mm, stružna dolžina: 6.000 mm, skupna dolžina: 8.500 mm, skupna širina: 1.600 mm, skupna višina: 1.600 mm, teža obdelovanca (maks.): 15.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-155B2/6M has been comprehensively rebuilt and modernized by us. It features technical parameters that match those of the technical and operational documentation of a new machine, complies with the WOT acceptance standards as well as Polish standards, and also fulfills EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: Order-specific general overhaul, delivery time 3.5 months from placing the order. Technical data: - Distance between centers / turning length: 6,000 mm - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Maximum workpiece weight between centers: 9,000 kg - Maximum workpiece weight between centers + 1 steady rest: 12,000 kg - Maximum workpiece weight between centers + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) Nedpfx Aev Ab Dqog Tswc - Overall dimensions: - Total length: 8,500 mm - Width: 2,130 mm - Height: 1,550 mm - Total weight: 14,100 kg Standard equipment: tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions - Digital Read Out for 2 axes, including display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change toolpost - Rear safety guard along the entire machine length - Inverter including soft-start function and potentiometer for stepless speed control

Stanje: rabljeno, Leto izdelave: 2010, Pillar slewing crane: mobile Jib outreach approx. 2500 mm Machine weight approx. 4 t Lifting capacity 125 kg Bucket empty weight 430 kg Minimum bucket fill weight 416 kg Minimum total bucket weight 846 kg Max. wheel load 391 kg Max. support load 544 kg Without documents/papers. Njdpjmt Rpwsfx Ag Tewc

Stanje: zelo dobro (rabljeno), Motor-driven NC rotary table Continuously adjustable rotary table (increment 0.001°) Attached pallet station: pallet changing table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Nwodpofk R Tdsfx Ag Tsc Overall height: 660 mm Centering bore: 100 H6 mm Clamping slots: 7 units Slot dimensions: 22 H7 mm Slot spacing: 160 mm Position measurement via rotary encoder ROD 250. Condition: Very good (used) Optional with machine bed (travel = 2000 mm) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is on milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and control system upgrades. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, vhodni tok: 238 A, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Nwodpfx Agjvf E Ave Tsc Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.