Rezkalni stroj

Deckel FP4M

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1988, Universal tool milling machine Make: DECKEL Model: FP 4 M Aktiv Year of manufacture: 1988 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue Machine no.: 2203-7097 with warranty Geometric acceptance with inspection protocol Accessories: Dcedpelfc U Dsfx Aa Hjr - 3-axis digital readout HEIDENHAIN TNC 113 - Fixed table 800 x 460 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamping DIN 2080 - Chip tray - Central lubrication, electric - Coolant unit - Operating manual Used as seen The machine corresponds technically to the state of the art of its year of manufacture.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1976, Universal tool milling machine Brand: DECKEL Model: FP 2 Year of manufacture: 1976 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine number: 6976 with warranty Dcedjd Tytyjpfx Aa Her Geometric inspection with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant device - Operating manual -Used, as seen-

Stanje: dober (rabljeno), Leto izdelave: 1987, Deckel FP4M, orodjarni rezkalni stroj s Heidenhain 3-osnim digitalnim prikazom, fiksna miza, SK 40 vpenjalni vretena, dodatki: različne vpenjalne tule in stebla za rezkala. V dobrem delovnem stanju, pripravljen za uporabo. Po dogovoru je možen preizkus pod napetostjo. Dcodpfxexmi I Ie Aa Her

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout, Special Light Grey Paint, CE Compliant! Technical Data: >> Year of manufacture: 1987 Machine no. 2203-2790 >> Fixed angular table (newly planed) >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head adjustable on spindle carrier, 150 mm >> Vertical and horizontal quill - SK40 taper >> Vertical quill travel: 90 mm >> Drawbar system M16 >> Weight approx. 1500 kg Dsdsxctyaepfx Aa Hscr Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant system >> Chip tray >> Central lubrication About the machine: For sale is a Deckel FP4M universal milling machine, CE compliant and in very good condition. The machine is partially overhauled, has minimal backlash, and all spindles move smoothly and evenly. The milling machine runs quietly even at maximum speed. Rapid traverse is available on all axes, and all bellows are new. The fixed angular table has been newly planed. A reliable and user-friendly machine. Oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: rabljeno, TECHNICAL DATA - Table size: 700 x 480 [mm] - Dielectric capacity: 600 [l] TRAVEL - Travel X/Y/Z axes: 350 x 250 x 250 [mm] - Travel U/V axes: +/- 90 [mm] - Max. taper: [°/mm] WORKPIECE - Max. workpiece dimensions: 900 x 680 x 250 [mm] - Max. workpiece weight: 400 [kg] - Surface finish quality: 0.125 [μm] WIRE GUIDING - Wire diameter: 0.15 - 0.30 [mm] - Spool weight: 5 - 8 [kg] - Speed: 30 - 270 [mm/sec] ELECTRICAL SUPPLY - Supply voltage: 380 [V] - Total drive power: 11 [kVA] Dcodpfxjuhq Rlj Aa Her WEIGHT AND DIMENSIONS - Space requirement: 2500 x 2500 [mm] - Machine height: 2200 [mm] - Machine weight: 2890 [kg] MACHINE HOURS - Operating hours: 1266 [h] ACCESSORIES - Control: Charmilles Pentium III CPU - Remote control - Coolant tank

Stanje: rabljeno, Geldmacher MST / Deckel FP4M Milling Machine – Toolroom Milling Machine Weight: approx. 1,450 kg Year of manufacture: 2012 Installation dimensions: Reference value: approx. 2,500 × 2,700 × 2,100 mm (Length × Depth × Height) Travel paths: X-axis: approx. 500 mm Y-axis: approx. 400 mm Z-axis: approx. 400 mm Spindle Taper / Tool Holder: ISO SK 40 Quill travel: Vertical quill: approx. 90 mm extension; in addition, the vertical milling head is movable along the spindle carrier Spindle speed range: approx. 50 – 2,500 rpm Feed rates: Feed: approx. 8 – 630 mm/min; rapid traverse (maximum feed rate) approx. 1,300 mm/min The machine is in very good condition. Dcedpfx Aasxcldko Hjr You are welcome to arrange an inspection. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. A net invoice can be provided for foreign customers, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data may differ and errors in the description are subject to change.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 500 mm, dolžina pomika po osi Y: 400 mm, dolžina podajanja os Z: 400 mm, največja hitrost vretena: 2.500 obr/min, dolžina mize: 790 mm, širina mize: 460 mm, Table size 790 x 460 mm Longitudinal travel 500 mm Cross travel 400 mm Vertical travel 400 mm Spindle travel 90 mm Dcjdpfx Ajwffymsa Her Spindle taper ISO 40 Spindle speeds 50 - 2,500 rpm

Stanje: novo, Leto izdelave: 2023, Two tables are connected in tandem operation for a combined load capacity of 5000 kg. Technical description with the following main data: Capacity: 3000 kg static distributed load Lift stroke: 800 mm Closed height: 240 mm Total height: 1040 mm Platform length: 1300 mm Platform width: 1000 mm Material: smooth sheet steel Lifting time: approx. 18 sec for full lift stroke Lowering time: dependent on load Electrical connection: 3 x 400 V / 50 Hz + protective earth, with 16 A CEE plug and 3 meter cable Motor: 2.2 kW, 1,400 rpm Solenoid voltage: 24 V DC Protection class: IP 54 overall, solenoid valve and switch IP 65 Paint finish: Steel blue RAL 5011 Power unit: integrated in the lift table Control box: deadman control incl. 2 m cable Total weight: approx. 330 kg Tandem control for synchronized movement. Note: 100% synchronization cannot be guaranteed. Any height differences that occur will be compensated in the base or upper position! The safety edge strips of the two lift tables are NOT interconnected. Minimum distance of 500 mm between the lift tables. Maximum distance of 3000 mm between the lift tables. Self-supporting base frame with 4 flange wheels in which the lift table is mounted. 4 ball-bearing flange wheels, wheel Ø150/175 mm, heavy-duty version, made from turned C45 steel. Height increased by approx. 50 mm. Dodpjk E Hmtofx Aa Hjcr

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 50 obr/min, poteza s peresom: 90 mm, Dear Sir or Madam, We are pleased to offer you a very well-maintained Deckel FP4M (K) active milling machine featuring a rotary-tilt-swivel table and 4-axis digital readout. With its comprehensive equipment, this model stands out as a real highlight among conventional machine tools. The machine has been thoroughly inspected in our workshop, is in excellent condition, and is immediately ready for operation. We look forward to your inquiry! Delivery time: Available immediately Machine No.: xxxx-xxxx Year of manufacture: xxxx Table design: Rotary-tilt-swivel table Dcjdpfx Aovvtlgsa Hor Spindle speed: 50 - 2500 rpm Feed rate: 8 - 630 mm/min, infinitely variable Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Rapid traverse: 1300 mm/min Travel X/Y/Z: 500/400/400 mm Tool holder: SK40 Drawbar system: hydraulic Vertical quill stroke: 90 mm Weight: approx. 1600 kg Further features and accessories include: 4-axis Heidenhain digital readout, 3-axis active control, hydraulic tool clamping, rotary-tilt-swivel table, coolant system, leveling feet, operating manual, and much more upon request... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and, if necessary, worn parts are replaced in advance - On request, we offer a complete or partial overhaul of the selected machine - You are free to choose the paint color of your selected machine - Upon request, you can order additional accessories such as tools directly - If desired, we can install further accessories such as safety devices - We are happy to take care of shipping and/or installation as well

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Pomik X: 500 mm Pomik Y: 400 mm Pomik Z: 400 mm Število obratov: 50 – 2500 obr/min Pogonska moč: 2,7 / 4,4 kW Vpenjalo orodja: SK 40 s hidravličnim vpenjalcem DIN 2080 Vrsta mize: fiksna ali nagibna miza Djdpfx Aow I A D Tsa Hocr Vpenjalna površina mize: 650 x 380 mm Teža: 1600 kg Dimenzije (z varnostnim območjem): pribl. 2500 x 2700 x 1950 mm Barva: RAL 6011 resedino zelena Digitalni prikaz: 3-osi HEIDENHAIN Oprema: centralno mazanje, KSS-kad, dodatna oprema na zahtevo

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout (K&C), Fully Refurbished to Factory Tolerances with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Camlock Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev Dcodevrckqspfx Aa Her >> Thread Cutting Capabilities: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: from 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake (switchable) >> Motor Power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer warranty with user manual Features: Conversion mm/inch, coordinate selection ABS/INC, value halving, reference mark, 200 tool programming slots, taper calculation, radius/diameter, one-touch zeroing, count direction switching >> 200 mm 3-jaw scroll chuck with soft jaws (almost new), 1 set of jaws >> Multifix size B with 2 tool holders, NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the Machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. The guideways have been newly ground and scraped. Inspection executed according to test protocol. 2K glossy white paint. The Multifix tool post and chuck are new. Safety features include a braked motor, electronic spindle guard, and two emergency stop switches, making this lathe in absolutely as-new condition. The machine runs very smoothly even at high spindle speeds. This latest generation of Weiler lathes is highly user-friendly and capable of producing ground-like surface finishes. You are welcome to inspect the machine under power on-site and verify its condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout in Special Light Grey Paintwork, CE Compliant!!! Technical Data: >> Year of manufacture: 1984 Machine no.: 2203-1429 >> Fixed angle table (newly planed) >> Speed range: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Motor power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head adjustable on spindle head by 150 mm >> Vertical quill and horizontal quill - SK40 taper >> Vertical quill travel: 90 mm >> Drawbar system: M16 >> Weight approx. 1,500 kg Equipment and Features: >> 3-axis Heidenhain digital readout >> Coolant system >> Chip tray Dcodpfx Aajw N Sfvj Hjr >> Central lubrication system About the Machine: For sale is a Universal Milling Machine Deckel FP4M, CE compliant, in very good condition. The machine is partially overhauled, with minimal backlash in the cranks, and all spindles move smoothly and evenly. Even at max. RPM, the milling machine runs quietly. Rapid traverse in all axes, bellows are as new. The fixed angle table has been newly planed. A reliable and user-friendly machine. Oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take the opportunity to view and test the machine under power at our facility.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP4M with 3-axis Heidenhain active digital readout – Excellent condition, CE compliant!!! Technical Specifications: >> Year of manufacture: 1992 Machine No. 2203-8449 >> Fixed angle table >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min Djdpfxju Tuk He Aa Hscr >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head adjustable on spindle carrier >> Vertical quill and horizontal quill - SK40 >> Vertical quill extendable 90 mm >> Hydraulic drawbar system >> Weight approx. 1600 kg Accessories and Equipment: >> 3-axis active Heidenhain digital readout >> Coolant system >> Chip tray >> Centralized electric lubrication unit >> Operating manual, spare parts diagrams About the machine: Offered is a Deckel FP4M Universal Milling Machine, active version, in excellent condition. The machine features minimal backlash and all feed screws move smoothly. Even at maximum spindle speeds, the milling machine runs smoothly. The machine is equipped with hydraulic tool clamping. This FP4M was only used occasionally in a government facility for training purposes. On this newer FP4 model, the feed rates on all three axes are steplessly adjustable, and the machine features rapid traverse in every axis. A major advantage is the active 3-axis digital readout. With the Heidenhain traverse control, you can enter dimensions that the machine will automatically position to. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout system makes operation easier and more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: rabljeno, Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, Tool grinding machine Jungner, Sweden Year of manufacture: 1995 Dcjdpswdihrjfx Aa Hor Accessories

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP4M with 3-axis Heidenhain digital display in special light grey paint! Dodpsvb T Ufofx Aa Hecr Technical Data: >> Year of manufacture: 1986, Machine No. 2203-2486 >> Fixed angle table >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head on spindle stand, adjustable by 150 mm >> Vertical and horizontal quill - ISO 40 taper >> Vertical quill extendable by 90 mm >> Drawbar system M16 >> Weight approx. 1,500 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain >> Coolant system >> Chip tray >> Central lubrication About the machine: For sale is a Deckel FP4M universal milling machine in very good condition. The machine exhibits minimal play in the handwheels and all spindles move easily and smoothly. Even at maximum speeds, the milling machine runs quietly. Rapid traverse is available in all axes. A reliable and user-friendly machine. The oil has been changed. Mechanically and electrically tested. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on-site.