Univerzalni obdelovalni center

DECKEL FP4 M

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: 1987 Machine no.: 2203-2772 >> Fixed angle table Isdpfxovg Ewcj Af Totb >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head adjustable on spindle carrier: 150 mm >> Vertical and horizontal quill - SK40 >> Vertical quill extendable 90 mm >> Drawbar system: M16 >> Weight approx. 1500 kg Equipment and Accessories: >> 3-axis Heidenhain digital readout >> Coolant system >> Chip tray >> Central lubrication About the machine: Offered here is a Universal Milling Machine Deckel FP4M in very good condition. The machine has minimal backlash, and all feed screws can be moved smoothly and evenly. Even at maximum speed, the milling machine runs quietly. Rapid traverse is available in all axes. A reliable and user-friendly machine. An oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes working easier and more precise. You are welcome to inspect and test the machine under power on site.

Stanje: rabljeno, Leto izdelave: 1989, Universal tool milling machine Brand: DECKEL Model: FP 1 Aktiv Year of manufacture: 1989 – workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 Geometric acceptance with inspection protocol Accessories: Itedpfor En Dyex Af Tsb - 3-axis active digital readout HEIDENHAIN TNC 113 with active function on X, Y, and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating manual Used, sold as seen, without warranty The technical condition of the machine corresponds to the standard of its year of manufacture.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP4M with 3-axis Heidenhain digital display in special light grey paint! Technical Data: >> Year of manufacture: 1986, Machine No. 2203-2486 >> Fixed angle table >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min Iodpfx Aovb T Ufef Tstb >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head on spindle stand, adjustable by 150 mm >> Vertical and horizontal quill - ISO 40 taper >> Vertical quill extendable by 90 mm >> Drawbar system M16 >> Weight approx. 1,500 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain >> Coolant system >> Chip tray >> Central lubrication About the machine: For sale is a Deckel FP4M universal milling machine in very good condition. The machine exhibits minimal play in the handwheels and all spindles move easily and smoothly. Even at maximum speeds, the milling machine runs quietly. Rapid traverse is available in all axes. A reliable and user-friendly machine. The oil has been changed. Mechanically and electrically tested. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on-site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Dear Sir or Madam, We are pleased to offer you very well-maintained Deckel FP4M milling machines. Each machine is at least technically inspected in our workshop and is therefore fully functional. We look forward to your inquiry! Delivery time: on request Machine number: xxxx-xxxx Year of manufacture: xxxx Table version: fixed Spindle speed: 50 - 2500 rpm Feed: 8 - 630 mm/min Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Rapid traverse: 1300 mm/min Travel X/Y/Z: 500/400/400 mm Ijdpfx Ajlrw Tisf Tetb Tool holder: SK40 Drawbar system: M16 Vertical quill stroke: 90 mm Weight: approx. 1.6 t Further equipment and accessories: on request Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines undergo a thorough inspection - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can completely or partially overhaul your selected machine - You are free to choose the paint color of your selected machine - If desired, you can order further accessories such as tools directly - Upon request, we can install additional accessories such as safety equipment - We are happy to arrange shipping and/or installation

Stanje: rabljeno, Leto izdelave: 2001, Dolžina struženja 470 mm Maks. premer struženja 390 mm Število vrtljajev vretena 3500 obr/min Pomiki X/Z – 235/520 mm Število postaj v revolverju 12 kos Krmiljenje: MSG 500 Ijdpfx Aoxdfi Nsf Totb Oprema: Različni nosilci orodij

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 500 mm, dolžina pomika po osi Y: 400 mm, dolžina podajanja os Z: 400 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 50 obr/min, skupna dolžina: 800 mm, širina mize: 460 mm, dolžina mize: 800 mm, vrsta vhodnega toka: trifazni, največja hitrost vrtenja: 2.500 obr/min, vrtljajska hitrost (min.): 50 obr/min, trajanje garancije: 3 meseci, Oprema: dokumentacija / priročnik, Ponujamo to generalno obnovljeno rezkalno stroj Deckel FP4 M, letnik 1985. Proizvajalec: Deckel Model: FP4 M Letnik: 1985 Stanje: generalno obnovljeno Iodpfx Afex Sllpj Tjtb Krmiljenje: TNC113 Aktiv Steuerung Opcijsko: univerzalna miza s vpenjalno površino 800mm x 370mm Če imate dodatna vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, poteza s peresom: 90 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 50 obr/min, Oprema: dokumentacija / priročnik, Dear Sir or Madam, We are pleased to offer you a partially overhauled milling machine of the type Deckel FP4M (K) aktiv. Thanks to its extensive features, this model stands out as a true highlight among conventional machine tools. The Deckel FP4MK has been thoroughly and partially refurbished in our workshop, bringing it to an absolutely top condition, making it technically, visually, and geometrically almost indistinguishable from a new machine. We look forward to receiving your inquiry! Delivery time: on request Spindle speed: 50 - 2500 rpm Feed rate: 8 - 630 mm/min, stepless Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Axis travel (X/Y/Z): 500/400/400 mm Tool holder: SK40 Drawbar system: hydraulic Vertical quill stroke: 90 mm Weight: approx. 1600 kg Table design: rigid angular table or rotary/swivel/tilt table Additional features and accessories include: Heidenhain 3-axis digital readout with active control, hydraulic tool clamping, coolant system, leveling feet, technical documentation, and much more on request… Our service promise to you: Iedpsx Irwdefx Af Tstb - We are a certified master company specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - You can freely choose the color of your selected machine - If desired, you can order additional accessories, such as tools, directly - On request, we can install additional accessories, such as safety devices - We are happy to handle shipping and/or installation for you

Stanje: rabljeno, Leto izdelave: 2005, Tehnične podrobnosti: Pomik X: 750 mm Pomik Y: 406 mm Pomik Z: 508 mm Teža stroja pribl.: 4 t Hitrost vrtalne vretena: 12.000 obr/min HAAS VF-2 je 3-osni obdelovalni center, zasnovan za natančnost, visoko točnost in zanesljivost. Itodpfjx Iwr Tjx Af Teb

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1988, Universal tool milling machine Make: DECKEL Model: FP 4 M Aktiv Year of manufacture: 1988 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey Itjdpfxslfc U De Af Tsb RAL5008 grey-blue Machine no.: 2203-7097 with warranty Geometric acceptance with inspection protocol Accessories: - 3-axis digital readout HEIDENHAIN TNC 113 - Fixed table 800 x 460 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamping DIN 2080 - Chip tray - Central lubrication, electric - Coolant unit - Operating manual Used as seen The machine corresponds technically to the state of the art of its year of manufacture.

Stanje: rabljeno, Geldmacher MST / Deckel FP4M Milling Machine – Toolroom Milling Machine Itsdpexcldksfx Af Tjb Weight: approx. 1,450 kg Year of manufacture: 2012 Installation dimensions: Reference value: approx. 2,500 × 2,700 × 2,100 mm (Length × Depth × Height) Travel paths: X-axis: approx. 500 mm Y-axis: approx. 400 mm Z-axis: approx. 400 mm Spindle Taper / Tool Holder: ISO SK 40 Quill travel: Vertical quill: approx. 90 mm extension; in addition, the vertical milling head is movable along the spindle carrier Spindle speed range: approx. 50 – 2,500 rpm Feed rates: Feed: approx. 8 – 630 mm/min; rapid traverse (maximum feed rate) approx. 1,300 mm/min The machine is in very good condition. You are welcome to arrange an inspection. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. A net invoice can be provided for foreign customers, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data may differ and errors in the description are subject to change.

Stanje: delavnici obnovljeno (rabljeno), Univerzalni rezkalni stroj za orodje Blagovna znamka: harich (DECKEL) Model: B (FP 2) brezstopenjski prenovljen s CE geometrijski prevzem z merilnim protokolom z garancijo Oprema: - 3-osni digitalni merilni sistem FAGOR Innova 30i-M - Fiksna ali univerzalna miza - Vertikalna rezkalna glava SK 40 - Centralno mazanje, ročno upravljano - Naprava za hladilno tekočino - Navodila za uporabo CE in varnostna oprema: - nova električna napeljava stroja z razdelilno omarico - elektronsko nadzorovan pokrov na vertikalni rezkalni glavi - Zaščitni pokrov vpenjalne glave z električnim varovanjem - Pogonski motor z zavorno funkcijo - Krmilna konzola z gumbom za nujni izklop, odklepanje, zagon in zaustavitev, potenciometer za nastavitev podajanja Iodovfdatspfx Af Totb - nova dokumentacija za stroj in razdelilno omarico - Izjava o skladnosti CE

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout, Special Light Grey Paint, CE Compliant! Technical Data: Iedpfx Aoxctyaef Tstb >> Year of manufacture: 1987 Machine no. 2203-2790 >> Fixed angular table (newly planed) >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head adjustable on spindle carrier, 150 mm >> Vertical and horizontal quill - SK40 taper >> Vertical quill travel: 90 mm >> Drawbar system M16 >> Weight approx. 1500 kg Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant system >> Chip tray >> Central lubrication About the machine: For sale is a Deckel FP4M universal milling machine, CE compliant and in very good condition. The machine is partially overhauled, has minimal backlash, and all spindles move smoothly and evenly. The milling machine runs quietly even at maximum speed. Rapid traverse is available on all axes, and all bellows are new. The fixed angular table has been newly planed. A reliable and user-friendly machine. Oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout in Special Light Grey Paintwork, CE Compliant!!! Technical Data: Itodpow N Sfvjfx Af Tsb >> Year of manufacture: 1984 Machine no.: 2203-1429 >> Fixed angle table (newly planed) >> Speed range: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Motor power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head adjustable on spindle head by 150 mm >> Vertical quill and horizontal quill - SK40 taper >> Vertical quill travel: 90 mm >> Drawbar system: M16 >> Weight approx. 1,500 kg Equipment and Features: >> 3-axis Heidenhain digital readout >> Coolant system >> Chip tray >> Central lubrication system About the Machine: For sale is a Universal Milling Machine Deckel FP4M, CE compliant, in very good condition. The machine is partially overhauled, with minimal backlash in the cranks, and all spindles move smoothly and evenly. Even at max. RPM, the milling machine runs quietly. Rapid traverse in all axes, bellows are as new. The fixed angle table has been newly planed. A reliable and user-friendly machine. Oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take the opportunity to view and test the machine under power at our facility.

Leto izdelave: 2008, Stanje: pripravljen za uporabo (rabljen), Feeding chamber dimensions: 280x580 mm, loading height: 700 mm, maximum load: 300 kg, equipped with safety enclosure and documentation. The machine was fully operational until recently; however, a complete maintenance service is required. Inspection is possible. Itedpfxeqgfbge Af Tjb

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 500 mm, dolžina pomika po osi Y: 400 mm, dolžina podajanja os Z: 400 mm, največja hitrost vretena: 2.500 obr/min, dolžina mize: 790 mm, širina mize: 460 mm, Table size 790 x 460 mm Longitudinal travel 500 mm Cross travel 400 mm Vertical travel 400 mm Spindle travel 90 mm Isdswffymepfx Af Tstb Spindle taper ISO 40 Spindle speeds 50 - 2,500 rpm