Orodni rezalnik

DECKEL FP2

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, A Deckel FP2 universal tool milling machine, completely overhauled in 2019, is available. Travel range X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, spindle speed: 2000 rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. An on-site inspection is possible. Kedpfxevf Iy Ds Af Noll

Stanje: dober (rabljeno), Technical Data: Working length: 2100 mm Klodjwchn Uspfx Af Njl Maximum bending capacity: 10.0 mm Pre-bending: 8.0 mm Top roll diameter: 200 mm Bottom roll diameter: 180 mm Number of driven rolls: 3 Hydraulic drop-end bearing Cone bending device Extended rolls for section bending Control panel with digital display Motor power: 5.5 kW CE marking Dimensions (L x W x H): approx. 3100 x 1150 x 1250 mm Weight: approx. 4 tons Accessories: Several sets of rolls for pipe and section rolling The seller is not liable for typographical or data transmission errors. The machine is in visual and technical condition, and wear consistent with its age; used machines are sold without any warranty.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 repowered by FPS, year of manufacture 2013, with 3-axis Heidenhain ND 780 digital readout, as new condition!! Technical Data: >> Machine No.: 2202-7020, FPS No.: 3364, year: 2013 >> Rigid angle table >> Spindle speed: 40 – 2000 rpm >> Feed and rapid traverse on 3 axes >> Drive power: 2.2 kW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: vertical & horizontal spindle >> Extendable vertical and horizontal quills – SK-40 >> Drawbar system S20x2 >> Weight approx. 1100 kg Accessories and Features: Kljdjvbifgspfx Af Nel >> 3-axis Heidenhain ND 780 digital readout >> Brake motor with immediate spindle stop >> Centralized lubrication >> 2x emergency stop >> Operating manual >> Coolant system About the Machine: For sale is a universal milling machine Deckel FP2, repowered by FPS, in as-new condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine features an electrical centralized lubrication system and two emergency stop switches for added safety. As of 2013, both mechanically and electrically tested. The Heidenhain digital readout simplifies work and ensures even greater precision. Take the opportunity to inspect and test the Deckel under power on site. The machine is available immediately.

Stanje: rabljeno, skupna višina: 16.000 mm, skupna širina: 1.100 mm, skupna dolžina: 1.500 mm, Net weight: 1,000 kg Milling machine, milling bench Model: Conventional Manufacturer: Deckel Type: FP2 Travel: 400 x 270 x 400 mm Speed: 40-2,000 rpm Table size: 700 x 330 mm Taper: ISO40 Spindle motor power: 2.2 kW Overall dimensions: 1,500 x 1,100 x 1,600 mm Kodpfx Aex S Eayef Njll Machine weight: 1,000 kg - Documentation available: No - CE certificate available: No - Control: Conventional - Power [kW]: 2.2 - Travel X-axis [mm]: 400 - Travel Y-axis [mm]: 270 - Travel Z-axis [mm]: 400 - Table length [mm]: 700 - Table width [mm]: 330 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2,000 - Transport dimensions: 1,500 x 1,100 x 1,600 mm (L x W x H) - Transport weight [kg]: 1,000 kg - Number of transport packages: 1 Financial information: VAT: The quoted price is exclusive of VAT VAT/differential taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Lukas van Rossum

Stanje: zelo dobro (rabljeno), Leto izdelave: 1975, O F F E R We can offer you, without obligation and subject to prior sale, the following from stock: DECKEL Universal Tool Milling Machine Type FP 2 Year of Manufacture ca. 1975 _____ Klodpsxzk Irjfx Af Nel Table travel: longitudinal motor/manual 390 / 400 mm vertical motor/manual 390 / 400 mm cross motor/manual 190 / 200 mm Fixed angle table 250 x 700 mm Installation height under spindle 400 mm Spindle overhang (quill travel) approx. 165–465 mm Spindle taper SK 40 18 spindle speeds 40–2,000 rpm Infinitely variable feed rate 5–400 mm/min Rapid traverse 1,200 mm/min Spindle drive 2.2 kW Total drive power 2.5 kW - 380 V - 50 Hz Weight 1,000 kg Accessories / Special Equipment • DECKEL universal swivelling angle table approx. 250 x 700 mm, mounted • Original DECKEL universal dividing head with tailstock and faceplates • Original DECKEL high-speed vertical milling head with separate drive • Large original DECKEL tool cabinet for storing the above accessories and various arbors, approx. 30 assorted collets, various milling tools, several arbors, etc., as well as operating tools, separate control cabinet, coolant system Condition : very good – demonstration-ready, ideal for training workshops/education Delivery : ex stock – as inspected Payment : strictly net – upon receipt of invoice Constantly available: further DECKEL FP 1 / FP 2 / FP 4 milling machines and, of course, additional accessories such as spiral milling attachments also in stock

Stanje: rabljeno, x-hod 400 mm y-hod 200 mm z-hod 400 mm Število vrtljajev vretena 18 Vrtljaji 40 - 2000 min⁻¹ Pritrdilna površina mize 730 x 240 mm Vpenjalo SK 40 Razmak med utori 4 / 12 mm Kedpfoxqrdtox Af Noll Število podajal 18 Območje podajal 8 - 400 mm/min Hitri pomik 1200 mm/min Skupna priključna moč 2,2 kW Teža stroja cca 1400 kg Potrebni prostor cca 1700 x 1400 x 1700 mm - robusten/močan univerzalni rezkalni stroj - Digitalni prikaz NEWALL - Hladilni sistem

Stanje: rabljeno, Leto izdelave: 1989, Technical details: X-axis travel: 300 mm Y-axis travel: 300 mm Z-axis travel: 400 mm Control system: Contour 3 path control Spindle taper ISO: SK 40 Spindle head swivels left and right: 90° Quill travel: 60 mm Speed range: 40 - 4000 rpm / 21 steps Feed rate: 2 - 3600 mm/min Rapid traverse speed: 4000 mm/min Table size: 620 x 390 mm Clamping table: angle table (mm) Table load capacity: 0.45 t Total power requirement: 12.5 kVA Klsdpfxeu Nc Twe Af Njl Machine weight approx.: 1400 kg Machine dimensions approx. (LxWxH): 1.5 x 2.1 x 2.0 m Control cabinet dimensions: 1.8 x 0.8 x 1.1 m Equipment: - Operation via Grundig electronic operator panel with pendant arm - Coolant system with pump - Handheld control unit with handwheel - Machine lighting The machine can be demonstrated under power. i.D.

Stanje: dober (rabljeno), Tehnični podatki: Delovna dolžina: 2050 mm Največja zmogljivost upogibanja: 18,0 mm Predupogib: 12,0 mm Premer zgornjega valja: 280 mm Premer spodnjega valja: 280 mm Naprava za stožčasto upogibanje Hidravlični nagibni ležaj Moč motorja: 7,5 kW Kedpjxruvzefx Af Noll Dimenzije (dolžina x širina x višina): pribl. 3650 x 1550 x 1650 mm Teža: pribl. 7,5 ton Prodajalec ne odgovarja za napake pri tipkanju ali prenosu podatkov. Stroj je po videzu, tehniki in obrabi primeren svoji starosti; rabljeni stroji se prodajajo brez kakršnega koli jamstva.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 300 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 3.150 obr/min, hitrost vretena (min.): 31 obr/min, vrsta vhodnega toka: trifazni, največja hitrost vrtenja: 6.300 obr/min, vrtljajska hitrost (min.): 31 obr/min, trajanje garancije: 3 meseci, Oprema: dokumentacija / priročnik, Ponujamo obnovljeni stroj DECKEL FP 2NC z upravljanjem TNC 320, letnik 1982, orodna rezkalna naprava. Proizvajalec: DECKEL Model: FP 2NC s TNC 320 Klsdpfex Sv Rcex Af Nel Leto izdelave: 1982 Stanje: Generalno obnovljeno Krmiljenje: TNC 320 Tip stroja: Orodna rezkalka Če imate vprašanja ali potrebujete dodatne informacije, nam pišite ali nas pokličite.

Stanje: dober (rabljeno), Leto izdelave: 1966, Universal Milling Machine Deckel FP2 -WKG 512- Kledsurk Exspfx Af Nsl Offered here is a universal milling machine manufactured by Deckel, model FP2. Technical Data Manufacturer: Deckel Model: FP2 Year of manufacture: 1966 Clamping surface: 730 x 240 mm Hydraulic vice jaw width: 125 mm Clamping range: up to 225 mm Collet set: 0.5 mm – 17.5 mm

Stanje: rabljeno, Leto izdelave: 1990, številka stroja/vozila: 2316-3, Ref. No. 10622 Technical specifications: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity GG 25 (cast iron): 40 mm - Thread cutting ST 60: M 30 - Thread cutting GG 25: M 40 Kjdpfx Afju Et Nbs Njll - Drill spindle taper: MK 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min / max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm - Weight approx.: 1500 kg Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the left side of the machine

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1968, potovalna razdalja osi X: 800 mm, pomik osi Y: 200 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, hod vretena: 80 mm, skupna dolžina: 1.000 mm, širina mize: 520 mm, dolžina mize: 1.000 mm, obremenitev mize: 2.000 kg, skupna masa: 2.500 kg, vhodna napetost: 400 V, teža obdelovanca (maks.): 2.000 kg, Ponujamo obnovljen rezkalni stroj DECKEL FP2LB, letnik 1968. Proizvajalec: DECKEL Model: FP2LB Ksdpfxox Sdxzs Af Noll Letnik: 1968 Stanje: obnovljen Tip stroja: rezkalni stroj Če imate vprašanja ali potrebujete dodatne informacije, nam pišite ali nas pokličite.

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Universal milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control system: Deckel Dialog Control 4: - 3D path control, including drilling and milling cycles - Monitor, electric hand-held control panel - Terminal for program input and output Technical data: Travel range X/Y/Z: 300 x 220 x 400 mm Speed: 31.5 – 3,150 rpm with 21 gear steps Feed rate: 4–2,000 mm/min Rapid traverse: 4 m/min Drive power: 1.6–2.0 kW Tool holder: SK 40 Hydraulic tool clamping Universal milling table with digital readout: - Clamping surface: 600 mm x 320 mm - Table load: 180 kg - C-axis rotation: 360° - A-axis tilt: 15°/45° - B-axis swivel: +/- 45° Vertical milling head: - Quill travel by hand – horizontal 65 mm, vertical 60 mm Additional equipment: - Manual machine handwheels with scale - Direct travel measurement of NC axes - Coolant system Special accessories: Klsdpfxowid Spj Af Nol - Approx. 33 tool holders (without tools) – see photo - High-speed milling spindle Machine data: - Machine weight approx. 1,380 kg - Required space incl. ancillary components: L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm - Power connection: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected under power and cutting operation by appointment.

Stanje: dober (rabljeno), Leto izdelave: 1984, številka stroja/vozila: 332, Offer 24130 Technical Specifications: - Drilling capacity in solid steel ST 60: 32 mm - Drilling capacity GG 25: 40 mm - Tapping capacity ST 60: M 27 - Drill spindle taper: MK 4 - Quill stroke: 150 mm - 12 spindle speeds: 102 – 2000 rpm - 3 feed rates: 0.1 – 0.3 mm/rev - Min./max. distance spindle – table: 310 / 610 mm - Drilling radius min / max: 380 / 1200 mm - Table height: 720 mm - Table size: 1200 x 500 mm - Drive: 400 V / 2.0 / 2.4 kW - Space requirement approx.: W 1200 x H 2800 x D 2300 mm - Weight approx.: 1500 kg - With: Klsdpjtxzrwjfx Af Nel - Tapping device - Hydraulic column and arm clamping - Coolant system - Vertical T-slots on rear machine side

Stanje: dober (rabljeno), Leto izdelave: 1976, Deckel FP3, orodna rezkalna naprava s 3-osnim digitalnim prikazovalnikom Heidenhain. Stroj je v dobrem stanju. Fiksna miza, vpenjalni stožec SK 40. Oprema: različne napenjalne puše in nosilci rezkalnikov, nasprotni nosilec. V dobrem, takoj pripravenem obratovalnem stanju. Po dogovoru je možen prikaz pod napetostjo. Kedpoxbx R Usfx Af Njll