Rezkalni stroj

Deckel FP1

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Tehnični podatki X-pot: 300 mm y-pot: 160 mm z-pot: 290 mm Površina mize: 600 x 210 mm Nosilec orodja: SK 40 Hitrosti vretena: (16) 40 - 2000 o/min Vodilni pomik brezstopenjski: 5 - 500 mm/min Hitri pomik: 1,2 m/min Pogon vretena: 1,5 / 1,9 kW Skupna potrebna moč: 9,5 kVA Rbedpfeyf Eigex Ad Tst Teža stroja pribl.: 830 kg Potreben prostor pribl.: 2000 x 2200 x 1655 mm Dodatne informacije Stroj je v zelo dobrem stanju in prihaja iz učne delavnice. Oprema: * 3-osni pozicijski krmilnik z aktivnim digitalnim prikazom Heidenhain TNC 123 - Ročno upravljanje: Ročni način in pozicioniranje z ročnim vnosom - Avtomatski način: Programirano izvajanje posameznih blokov, shranjevanje programov * Fiksna kotna miza * Premakljiv navpični rezkalni glavič, nagibni razpon +/- 90°, pomik pinole 60 mm * Naprava za hlajenje * Centralno mazanje * Protipodporna glava z ležajem * Nihajna stopala * Dokumentacija

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Rbedpfow Uc Npex Ad Tst Installed power: 2.10 kW Customs tariff: 8459.6930 TECHNICAL SPECIFICATIONS Vertical Rectangular Table: - Usable surface: 740 x 200 mm - Number of T-slots: 2 - T-slot width: 12-H7 - Distance between T-slots: 120 mm Fixed Angle Plate Table: - Usable surface: 700 x 250 mm - Number of T-slots: 5 - T-slot width: 12-H7 - Distance between T-slots: 40 mm - Lateral travel: 250 mm total Universal Tilting Table: - Usable surface: 600 x 210 mm - Number of T-slots: 4 - T-slot width: 12-H7 - Distance between T-slots: 40 mm - Lateral travel: 350 mm total - Swivelling range on three planes, on either side: 30°- 45°- 30° Spindle Taper: - Horizontal spindle housing: ISO 30 (40) - Vertical milling head: ISO 30 (40) - Universal quick-change head: SV E20+ES20 Vertical Swivelling Range: Vertical milling head: 360° Longitudinal travel: Hand/automatic: 320/300 mm Vertical travel: Hand/automatic: 375/355 mm Transverse travel: Adjustment handle: 150 mm Quill travel: 60 mm Reading accuracy with micrometric vernier: 0.02 mm Main motor (kW/rpm): 1.5/1500 Feed motor (kW/rpm): 0.45/3000 Coolant pump motor (kW/rpm): 0.15/3000 Spindle speed: - 1st range (rpm): 58-375 - 2nd range (rpm): 330-2000 Working feeds - longitudinal or vertical (mm/min): 12-400 - 10 feed rates (mm/min): 12-18-26-38-57-85-125-185-270-400 Rapid traverse (mm/min): Longitudinal or vertical: 1200 Subject to errors or omissions, the technical data is provided without guarantee.

Stanje: delavnici obnovljeno (rabljeno), Please read the technical specifications thoroughly. If the machine is under consideration as an investment for you, we kindly ask that you provide your full identification, including a correct telephone number and email address, in order to receive a quotation. Deckel FP1 AKTIV (3-axis Active) Machine no.: 2102-5745 Year of manufacture: approx. 1988 Travel distances: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment: - 3-axis active digital display HEIDENHAIN type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Quill travel on vertical milling head: 60 mm - Vertical milling head swivels and extends horizontally by 100 mm - Coolant system (coolant tank in machine base) - Documentation Rbodpfxoxpwfge Ad Tet - Centralised lubrication Footprint (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been cosmetically refurbished and technically inspected. Videos demonstrating the geometry can be provided upon request. Backlash Y axis: 0.15 mm Backlash X axis: 0.3 mm Backlash Z axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Parallelism deviation Y axis: 0.002 mm (measured over 150 mm) Parallelism deviation X axis: 0.002 mm (measured over 300 mm) The following parts have been renewed: - Central lubrication checked - Heidenhain digital display overhauled - Set of wipers installed - LEDs in active display replaced - Oil change - Vertical milling head newly fitted with bearings - Oil sight glass replaced Price: net, ex works, loaded from stock

Stanje: dober (rabljeno), Please read the technical specifications carefully. If you consider this machine as a potential investment, we kindly request your full identification including a correct telephone number and email address when submitting an offer. DECKEL Universal Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travel distances: X/Y/Z: 300 x 160 x 340 mm Rodpjxyc Tkjfx Ad Tsbt Manual adjustment of milling head arm: 100 mm Enlarged working area to: 300 x 260 mm Spindle speed, vertical/horizontal: 40 – 2,000 rpm Gear stages: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed, X/Z-axis: 5 – 500 mm/min Feed rate adjustment: stepless Rapid traverse X/Z-axis: 1,200 mm/min Feed, Y-axis: manual Fixed angle table: 600 x 210 mm Tilting vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1,250 x 1,200 x 1,850 mm Technical data subject to change without notice! Features: - For horizontal machining, the milling head is swivelled 90 degrees and pushed back. - 3-axis precision digital readout HEIDENHAIN - Stepless feed in X/Z-axis - The machine was partially overhauled by a specialist company several years ago. Equipment: - 3-axis digital readout HEIDENHAIN - Micro-cooling/lubrication system - Fixed angle table - Chip tray - Machine lamp - Machine feet Further accessories available on request! Condition: Good to very good, from a training facility Available from March 2026

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1990, Univerzalni rezkalni stroj Znamka: DECKEL Model: FP 1 Aktiv Letnik: 1990 - preizkušen v delavnici Serijska številka: 2102-5866 Tip rezkalne glave: 2171 Številka rezkalne glave: 4613 Geometrijski prevzem s preizkusnim protokolom Pribor: - 3-osni aktivni digitalni prikazovalnik HEIDENHAIN TNC 113 z aktivno funkcijo v X-, Y- in Z-osi - Univerzalna miza 590 x 250 mm (T-utori: 12 mm) - Vertikalna rezkalna glava SK 40 z vijačnim navojem S 20 x 2 - Brez hladilne naprave možnost naknadne vgradnje - Električna centralna mazalna naprava Rbjdpfx Adjx S Edlo Tet - Navodila za uporabo Rabljeno kot vidno, brez garancije Stroj ustreza tehničnemu stanju časa izdelave.

Stanje: zelo dobro (rabljeno), Please read the technical specifications carefully. If you are considering this machine as an investment, we kindly ask that you provide your full proof of identity, including a correct telephone number and email address, when requesting a formal offer. DECKEL Universal Milling Machine FP 1 No. 2101 with HEIDENHAIN 2-axis digital readout Rsdpfxsxyc N Ee Ad Tobt Travel range: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of the milling head arm: 100 mm Enlarged working area: 300 x 260 mm Spindle speed, vertical/horizontal: 40 – 2,000 rpm Gear stages: 16 Spindle taper: SK 40 Tool drawbar: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed, X/Z axis: 5 – 500 mm/min Feed adjustment: stepless Rapid traverse, X/Z axis: 1200 mm/min Y-axis feed: manual Fixed angle table: 600 x 210 mm Swiveling vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data not binding! Features: For horizontal machining, the milling head is swung by 90 degrees and pushed to the rear. 2-axis precision digital readout HEIDENHAIN POSITIP VRZ 719 Stepless feed in X/Z axis The machine was partially overhauled by a specialized company several years ago. Equipment: 2-axis HEIDENHAIN digital readout Fixed angle table Chip tray Machine lamp Machine feet Additional accessories available upon request! Condition: Good to very good, from a training workshop Available from March 2026

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 30000452, potovalna razdalja osi X: 300 mm, pomik osi Y: 150 mm, pomik po osi Z: 340 mm, hod vretena: 60 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, dolžina mize: 600 mm, širina mize: 210 mm, skupna masa: 710 kg, obremenitev mize: 200 kg, Oprema: dokumentacija / priročnik, DECKEL FP1 – Fully Refurbished (2012) by FPS (Germany) with Heidenhain Digital Readout, Tool Cabinet with Tools, and Indexing Head. Since the overhaul, the machine has seen minimal use and is therefore in near-new condition. About FPS: Specialized in the complete overhaul of DECKEL machines. MANUFACTURER: DECKEL MODEL: FP1 CONDITION: Refurbished (2012) – mechanically & electronically as new! LOCATION: Graz (Austria) IMAGES/VIDEOS: For further pictures and videos of the operating unit, please send us your inquiry. Description: This high-quality DECKEL FP1 milling machine has been completely refurbished and brought up to the latest mechanical and electrical standards. A new CE-compliant control cabinet has been installed in accordance with the latest regulations (BGVA 3 / DIN-EN 60204-1 new machine standard). All control systems, drive packages, and drive motors were completely renewed during the overhaul and upgraded to state-of-the-art specifications. As part of the modernization, a new touch-proof control cabinet and motor were also installed. Technical Specifications: Operation: Manual, with automatic positioning capability Control: 3-axis Heidenhain digital readout Rbjdsxywhcopfx Ad Tst Speed range: 40 – 2000 rpm (geometrically stepped, 16 speed levels) Feed rate: 10 – 500 mm/min (stepless adjustment) Rapid traverse: 1.2 m/min (stepless adjustment) Quill: 60 mm vertical & horizontal stroke, SK40 spindle taper Travel (X/Y/Z): 300 / 150 / 340 mm Table size: 600 × 210 mm Table load: max. 200 kg Machine weight: 710 kg (incl. angle table and milling head) Footprint: 1600 x 1400 x 1750 mm (W/D/H) Equipment: Vertical and horizontal spindle Manually swiveling milling head ± 90° Completely new electrical system & drive packages Refurbished – mechanically & electronically as new Extras: Z-axis bellows cover Special paint finish Highlights: Heidenhain digital readout for precise operation Control systems, drive package, and drive motors were fully renewed during overhaul Contact us to schedule a viewing appointment.

Stanje: dober (rabljeno), Offertă o mașină de frezat universală DECKEL FP1 aktiv, parțial recondiționată, cu afișaj digital Heidenhain pe 3 axe TNC 113 și masă rotativă divizor cu mandrină cu trei bacuri. Construcția compactă o face ideală pentru ateliere hobby mai mici sau garaje. Producător: DECKEL Tip: FP1 Nr. de serie: 2102-3314 - Cursă de lucru X/Y/Z: 300x160x340 mm - Turație arbore principal: 40–2000 rpm - Avans continuu pe toate cele trei axe - Avans rapid pe toate cele trei axe - Cap de frezat vertical - Reglare verticală 100 mm - Dispozitiv de frezare orizontală - Afișaj digital Heidenhain 3 axe TNC113 - Sistem de răcire Rbsdpfxoxmggue Ad Tot - Masă rotativă divizor cu mandrină 3 bacuri Putere totală instalată: 1,9 kW Dimensiunile utilajului L x l x h: 1,30 x 1,10 x 1,60 m Greutate: aprox. 850 kg Prețul este net, ex works, încărcare inclusă. Stare: folosită.

Stanje: pripravljen za uporabo (rabljen), potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, položaj glave za glodanje: SK40, vhodna napetost: 400 V, Deckel FP1 2-axis Active Travels: X = 300 mm Redpfovuzg Aox Ad Tobt Y = 160 mm Z = 340 mm Spindle speed 40-2000 rpm Automatic feed and rapid traverse on the X, Y and Z axes. Infinitely variable control. Table size 600 x 260 mm 2-axis Aktiv control, point-to-point operation. 3-axis digital readout by Heidenhain. Spindle taper SK40 Deckel (external thread).

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1994, Universal Tool Milling Machine DECKEL FP 1 With 3-axis active digital readout Heidenhain TNC 123 Year of manufacture: 1994 Travel distances: X 300 Y 160 Z 340 mm Spindle speed range: 40 – 2000 rpm Including the following accessories: Rigid angle table 600 mm x 250 mm clamping surface Rbsdpfxjw Agxro Ad Tjt Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 pc. machine vice 1 pc. steady with counter bearing 1 pc. long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Various tool holders S 22 x 2 Z-axis bellows 1 pc. chip guard Machine lamp Automatic central lubrication pump Coolant system Operating manual THE MACHINE IS IN EXCELLENT CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Rezkalni stroj Deckel FP1. Zelo dobro stanje. Popolnoma funkcionalen. Rbjdpfsxgdr Iex Ad Tet

Stanje: delavnici obnovljeno (rabljeno), dolžina podajanja os X: 300 mm, dolžina pomika po osi Y: 160 mm, dolžina podajanja os Z: 340 mm, Updated Machineseeker Description (with Axis Travel) Deckel FP1 Aktiv – 3 Axes – Partially Refurbished – Immediately Operational Rjdpfex Tdy Iex Ad Tebt Offered is a Deckel FP1 Aktiv in technically inspected, partially refurbished condition. The machine has been professionally reconditioned and is in a dependable, ready-to-use state. Ideally suited for workshops, toolmaking, training environments, as well as prototype and small-batch production. This is not an unchecked used machine, but a technically overhauled toolroom milling machine with a clearly defined scope of delivery and reliable lead time. Technical Data and Features Travel distances: X-axis approx. 300 mm Y-axis approx. 160 mm Z-axis approx. 340 mm 3 axes with Aktiv control and digital readout Infinitely variable feed on all 3 axes Coolant system Brake motor Rigid angle table New LED work lamp New leveling feet Technical documentation in PDF format Scope of Refurbishment Workshop-tested and partially refurbished Technical inspection of all functions Repair or replacement of defective components Complete basic cleaning Readjustment of all settings as required Replacement of all lubricants Replacement of selected standard and various wear parts New paint finish in RAL 7035 / 7016 The conscious decision for a partial refurbishment provides an optimal balance between operational safety, cost-efficiency, and availability. A full regrinding of the guideways was not carried out, as there was no technical necessity for it. Scope of Delivery Machine loaded free of charge Delivery time approx. 12 weeks