Rezkalni stroj

DECKEL FP 1

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Tehnični podatki X-pot: 300 mm y-pot: 160 mm z-pot: 290 mm Površina mize: 600 x 210 mm Klsdpfeyangqsx Af Nol Nosilec orodja: SK 40 Hitrosti vretena: (16) 40 - 2000 o/min Vodilni pomik brezstopenjski: 5 - 500 mm/min Hitri pomik: 1,2 m/min Pogon vretena: 1,5 / 1,9 kW Skupna potrebna moč: 9,5 kVA Teža stroja pribl.: 830 kg Potreben prostor pribl.: 2000 x 2200 x 1655 mm Dodatne informacije Stroj je v zelo dobrem stanju in prihaja iz učne delavnice. Oprema: * 3-osni pozicijski krmilnik z aktivnim digitalnim prikazom Heidenhain TNC 123 - Ročno upravljanje: Ročni način in pozicioniranje z ročnim vnosom - Avtomatski način: Programirano izvajanje posameznih blokov, shranjevanje programov * Fiksna kotna miza * Premakljiv navpični rezkalni glavič, nagibni razpon +/- 90°, pomik pinole 60 mm * Naprava za hlajenje * Centralno mazanje * Protipodporna glava z ležajem * Nihajna stopala * Dokumentacija

Stanje: rabljeno, Leto izdelave: 1955, Technical details: Swing diameter over bed: 420 mm Swing diameter over cross slide: 240 mm Turning length: 1100 mm Swing diameter in the gap: 600 mm Spindle speed range: 24 - 900 / 8 steps rpm Spindle bore: 41 mm Feed range X-axis: 0.0120 - 0.1000 mm/rev Feed range Z-axis: 0.0062 - 0.0302 mm/rev Tailstock quill taper: MT 3 Tailstock quill travel: 220 mm Total power requirement: approx. 4.0 kW (non-binding) Ksdpou Ix D Asfx Af Nsll Machine weight approx.: 1.2 t Machine dimensions approx. LxWxH: 2.3 x 0.9 x 1.3 m Equipment: 3-jaw chuck Röhm Ø 200 mm 4-way tool post, swiveling 30° right/left 2x T-slot for copying device Live center

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1994, Universal Tool Milling Machine DECKEL FP 1 Kljdpfx Afjw Agxre Nsl With 3-axis active digital readout Heidenhain TNC 123 Year of manufacture: 1994 Travel distances: X 300 Y 160 Z 340 mm Spindle speed range: 40 – 2000 rpm Including the following accessories: Rigid angle table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 pc. machine vice 1 pc. steady with counter bearing 1 pc. long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Various tool holders S 22 x 2 Z-axis bellows 1 pc. chip guard Machine lamp Automatic central lubrication pump Coolant system Operating manual THE MACHINE IS IN EXCELLENT CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Stanje: delavnici obnovljeno (rabljeno), dolžina podajanja os X: 300 mm, dolžina pomika po osi Y: 160 mm, dolžina podajanja os Z: 340 mm, Updated Machineseeker Description (with Axis Travel) Deckel FP1 Aktiv – 3 Axes – Partially Refurbished – Immediately Operational Offered is a Deckel FP1 Aktiv in technically inspected, partially refurbished condition. The machine has been professionally reconditioned and is in a dependable, ready-to-use state. Ideally suited for workshops, toolmaking, training environments, as well as prototype and small-batch production. This is not an unchecked used machine, but a technically overhauled toolroom milling machine with a clearly defined scope of delivery and reliable lead time. Technical Data and Features Travel distances: X-axis approx. 300 mm Y-axis approx. 160 mm Z-axis approx. 340 mm 3 axes with Aktiv control and digital readout Infinitely variable feed on all 3 axes Coolant system Brake motor Rigid angle table New LED work lamp New leveling feet Technical documentation in PDF format Kedex Tdy Iopfx Af Njll Scope of Refurbishment Workshop-tested and partially refurbished Technical inspection of all functions Repair or replacement of defective components Complete basic cleaning Readjustment of all settings as required Replacement of all lubricants Replacement of selected standard and various wear parts New paint finish in RAL 7035 / 7016 The conscious decision for a partial refurbishment provides an optimal balance between operational safety, cost-efficiency, and availability. A full regrinding of the guideways was not carried out, as there was no technical necessity for it. Scope of Delivery Machine loaded free of charge Delivery time approx. 12 weeks

Stanje: novo, Leto izdelave: 2024, Saw Saw blade speed: 3000 / 4000 / 5000 RPM Saw blade diameter and bore: 300 – 400 mm, 30 mm Saw blade tilting: 90° – 45° Cutting depth at 90° / 45°: 125 mm / 90 mm Cutting width with parallel fence, version Z400 M, Z400 EL: 1350 mm (option 1000 / 1525 mm) Cutting width with parallel fence, version Z400 X1, Z400 X3: 1250 mm (option 1500 mm) Cutting length: 3500 mm (option 2500 mm / 4100 mm) Cast iron table dimensions: 985 mm x 710 mm Sliding table dimensions: 3200 mm (option 2200 mm / 3800 mm) x 420 mm Cross table dimensions: 1420 mm x 650 mm Length of swiveling cross fence: 2295 mm (telescopic extension up to 3000 mm) Scoring unit Scoring saw blade diameter and bore: 120 mm, 20 mm Cutting depth with 120 mm scoring blade: 3.5 mm Scoring blade rotational speed: 8200 RPM Scoring saw motor power: 1.3 kW / 2 HP (S6) Weight: 850 kg (Z400 – 3200) – 1080 kg (Z400 X3 – 3800) Ksdpeglfv Sjfx Af Nell Power supply: 400 V 3-phase (option 230 V 3-phase) Motor power (3-phase): 7 kW / 9.5 HP (S6), option 9.2 kW / 14 HP (S6)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1990, Univerzalni rezkalni stroj Znamka: DECKEL Model: FP 1 Aktiv Letnik: 1990 - preizkušen v delavnici Serijska številka: 2102-5866 Tip rezkalne glave: 2171 Številka rezkalne glave: 4613 Geometrijski prevzem s preizkusnim protokolom Pribor: Kledsx S Edlepfx Af Njl - 3-osni aktivni digitalni prikazovalnik HEIDENHAIN TNC 113 z aktivno funkcijo v X-, Y- in Z-osi - Univerzalna miza 590 x 250 mm (T-utori: 12 mm) - Vertikalna rezkalna glava SK 40 z vijačnim navojem S 20 x 2 - Brez hladilne naprave možnost naknadne vgradnje - Električna centralna mazalna naprava - Navodila za uporabo Rabljeno kot vidno, brez garancije Stroj ustreza tehničnemu stanju časa izdelave.

Leto izdelave: 1974, Stanje: skoraj kot novo (rabljeno), As-new Deckel FP1 universal milling machine, overhauled by FPS, featuring 3-axis Heidenhain digital readout, adjustable swivel table, and SK 40 spindle taper. Equipped with spindle brake. Accessories include tailstock and various collets. The machine is in excellent, ready-to-operate condition and can be demonstrated under power by arrangement. Klsdpfx Afjq A Icqo Njl

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Engine Lathe Model Condor B, Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout NEW Geometrically overhauled with inspection protocol for new machine tolerances! Technical Data: >> Machine No. 90-1495 >> Center height: 165 mm >> Center distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Features: >> New K&C 3-axis digital readout, 12 months manufacturer's warranty with operation manual Functions: switching mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching Kjdpfx Afovambce Nsll >> Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments >> 160 mm three-jaw chuck with 2 sets of jaws, NEW >> Multifix quick-change toolpost, size A, with 2 tool holders, NEW >> Bed stop >> Electric chuck guard NEW >> LED machine lamp NEW >> Rear safety cover >> Operating manual >> Coolant system >> Machine feet About the machine: For sale is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, like-new condition. All guides have been newly ground or hand-scraped. Delivered with a test protocol upon acceptance. This is an excellent machine with electronic spindle protection. All accessories such as collets, chuck, and Multifix toolpost are new. Spindles, spindle nuts, bearings, belts, and wipers have been replaced. Take the opportunity to inspect this machine under power at our site and convince yourself of its condition.

Stanje: dober (rabljeno), Three-phase motor, electric motor, brake motor - Manufacturer: Siemens, electric motor type 1LC3113-4BB23 Z from a Deckel FP4L milling machine - Power output: 4.0 kW - Speed: 1435 rpm - Mounting type: B14 Kjdpeul H Dwjfx Af Noll - Protection rating: IP 44 - Brake: Disc brake type EK5dB24 - Dimensions: 575/270/H225 mm - Weight: 64 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 40 obr/min, 2-axis active digital display (Heidenhain) Spindle mounting: SK40 (S20x2) Travel distances: X 300 / Y 160 / Z 340 mm Ksdpfx Asvnr Hysf Noll Spindle speed: 40 - 2000 rpm (2 gearbox stages) Feed infinitely variable adjustable The machine is in well-maintained condition and can be inspected under power on site. Includes extensive accessories: - Machine vise - Operating manual / electrical circuit diagram / spare parts list - Collet set (S20x2) incl. SK40 collet chuck - Additional accessories available on request.

Stanje: novo, Leto izdelave: 2025, - Serija TFON Leveltech® izravnalnih strojev Modeli: S-3560, S-3511, S-3513, S-3516. - Namenjeni natančnemu izravnavanju tankih materialov, ti stroji so opremljeni z naprednimi elektromehanskimi krmilniki in uporabniku prijaznim zaslonom na dotik za učinkovito upravljanje. Klsdpfx Afshwb Uts Njl Debelina materiala: 0,3 mm – 5,0 mm Maksimalna širina materiala: -S-3560: 600 mm -S-3511: 1.100 mm -S-3513: 1.300 mm -S-3516: (širina ni navedena) Minimalna dolžina materiala: 70 mm Nastavitev razmika za izravnavanje: Elektromehansko / PLC krmiljeno Zaščita pred preobremenitvijo: Standardno Kontrolni zaslon: Zaslon na dotik Teža stroja: S-3560: 5.000 kg S-3511: 10.000 kg S-3513: 14.000 kg Dimenzije stroja (D × Š × V): S-3560: 1.985 × 1.585 × 1.820 mm S-3511: 2.485 × 1.585 × 1.820 mm S-3513: 2.695 × 1.585 × 1.820 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 40 obr/min, 3-axis active digital display (Heidenhain TNC113) Spindle taper: SK40 (S20x2) Travel: X 300 / Y 160 / Z 340 mm Spindle speed: 40 - 2000 rpm (2-speed gearbox) Feed rate steplessly adjustable Kljdpfovnrz Rex Af Nsl The machine is in well-maintained condition and can be inspected under power on site. Including extensive accessories: - Machine vice - Operating manual / electrical schematic / spare parts list - Collet chuck set (S20x2) including SK40 collet chuck adapter - Additional accessories available upon request.

Stanje: dober (rabljeno), 1 used universal tool milling machine Kjdpfx Afsrn I Rzj Nell Make: Deckel Model: FP 1 Year of manufacture: 1982 Technical specifications: X-axis travel: 300 mm Y-axis travel: 160 mm Z-axis travel: 340 mm Spindle taper: SK 40 Table size: 600 x 210 mm Spindle speeds: 40–2000 rpm Machine weight approx.: 1 t Space requirement approx.: 1.6 x 1.3 x 1.8 m

Stanje: rabljeno, Leto izdelave: 1989, Universal tool milling machine Brand: DECKEL Model: FP 1 Aktiv Year of manufacture: 1989 – workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 Geometric acceptance with inspection protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function on X, Y, and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant device - Central lubrication, electric Kljder En Dyspfx Af Nsl - Operating manual Used, sold as seen, without warranty The technical condition of the machine corresponds to the standard of its year of manufacture.

Stanje: zelo dobro (rabljeno), DECKEL Universal Milling Machine FP 1 No. 2101 with HEIDENHAIN 2-axis digital readout Travel distances: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Enlarged working area: 300 x 260 mm Spindle speed: Vertical/Horizontal: 40 – 2,000 rpm Gear steps: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed X/Z axes: 5 – 500 mm/min Feed control: stepless Rapid traverse: X/Z axes: 1,200 mm/min Feed Y-axis: manual Fixed angle table: 600 x 210 mm Swiveling vertical head: ±90 degrees Weight: 710 kg Dimensions: approx. 1,250 x 1,200 x 1,850 mm Technical data not binding! Features: • For horizontal machining, the milling head is swiveled by 90 degrees and pushed back. • 2-axis HEIDENHAIN POSITIP VRZ 719 precision digital readout • Stepless feed in X/Z axes • The machine underwent partial overhaul by a specialized company a few years ago. Equipment: • 2-axis digital readout HEIDENHAIN • Fixed angle table • Chip tray • Machine lamp • Machine feet Kodpfx Afsxyc N Es Nsll Additional accessories available on request! Condition: Good to very good from training facility Available from March 2026