Rezkalni stroj

DECKEL FP 1 Aktiv

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1990, Univerzalni rezkalni stroj Znamka: DECKEL Model: FP 1 Aktiv Kwodpfex S Edlex Abbjt Letnik: 1990 - preizkušen v delavnici Serijska številka: 2102-5866 Tip rezkalne glave: 2171 Številka rezkalne glave: 4613 Geometrijski prevzem s preizkusnim protokolom Pribor: - 3-osni aktivni digitalni prikazovalnik HEIDENHAIN TNC 113 z aktivno funkcijo v X-, Y- in Z-osi - Univerzalna miza 590 x 250 mm (T-utori: 12 mm) - Vertikalna rezkalna glava SK 40 z vijačnim navojem S 20 x 2 - Brez hladilne naprave možnost naknadne vgradnje - Električna centralna mazalna naprava - Navodila za uporabo Rabljeno kot vidno, brez garancije Stroj ustreza tehničnemu stanju časa izdelave.

Stanje: novo, High-performance thread cutting machine with leadscrew and optimal safety mechanism to prevent tool breakage. Programmable for single or continuous cycle operation. Electronically controlled motor brake in single cycle mode. Easy leadscrew change via quick coupling. Technical Data UNIMAX 3T GL: Thread cutting capacity: M4 - M20 Threads per hour: 800 Standard drilling capacity: 28 mm Spindle: MK 3 Kwsdpfx Ajgv I Unebbot Thread depth: 90 mm Drilling depth: 120 mm Throat depth: 260 mm Spindle / table distance: 220 - 600 mm Table surface: 420 x 390 mm T-slot width: 14 mm Column diameter: 110 mm Overall height: 1,300 mm Weight: 250 kg Special motor: 0.9 kW Power supply: 400 V / 50 Hz 9 spindle speeds: 95 / 160 / 200 / 350 / 420 / 450 / 750 / 900 / 1,650 rpm Standard packaging: C - 160x75x125 cm Additional accessories/options: Leadscrew, tap holder, retract-release mechanism, externally ventilated motor, die holder, flange quill, foot pulse switch, two-hand start, LED machine light, minimum quantity lubrication system, base cabinet

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 40 obr/min, 2-axis active digital display (Heidenhain) Spindle mounting: SK40 (S20x2) Travel distances: X 300 / Y 160 / Z 340 mm Spindle speed: 40 - 2000 rpm (2 gearbox stages) Feed infinitely variable adjustable Ksdpevnr Hyjfx Abbowt The machine is in well-maintained condition and can be inspected under power on site. Includes extensive accessories: - Machine vise - Operating manual / electrical circuit diagram / spare parts list - Collet set (S20x2) incl. SK40 collet chuck - Additional accessories available on request.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 40 obr/min, 3-axis active digital display (Heidenhain TNC113) Spindle taper: SK40 (S20x2) Travel: X 300 / Y 160 / Z 340 mm Spindle speed: 40 - 2000 rpm (2-speed gearbox) Feed rate steplessly adjustable The machine is in well-maintained condition and can be inspected under power on site. Including extensive accessories: - Machine vice - Operating manual / electrical schematic / spare parts list Kwsdpsvnrz Rofx Abbjt - Collet chuck set (S20x2) including SK40 collet chuck adapter - Additional accessories available upon request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Rolldruck Stufenlos regelbar von 240 kN Vorschub - Feinverstellung 0,5-45 mm/min Drehzahl 0-80 U/min Schwenkwinkel der Rollköpfe 11 ° Durchmesser der Rollspindeln 69,85 mm Hub - Rollspindelschlitten 0-150 mm min. Abstand - Rollspindeln 138 mm max. Abstand - Rollspindeln 285 mm min. Durchmesser - Rollwerkzeuge 230 mm max. Durchmesser - Rollwerkzeuge 135 mm kleinster Durchmesser 2 mm größter Durchmesser 55 mm Gewindelänge im Einstechverfahren 200 mm Kwodjxukrqspfx Abbot Gewindelänge im Durchlaufverfahren 2000 mm größte Steigung d. Gewindes 4 mm Gesamtleistungsbedarf 14 kW Maschinengewicht ca. 2,4 t Raumbedarf ca. 2,0 x 2,5 x 1,9 m Rollzeit stufenlos einstellbar von: 0,1s Pausenzeit stufenlos einstellbar von: 0,1s Aufnahmelänge der Rollspindeln: 200mm Maschinenbetthöhe: 810mm Rollspindelhöhe über Maschinenbett: 200mm Höhe der Stützlager: 115mm Größte Teilung bei Kerbverzahnung: 2,5mm -(bis 70kg/mm2 Festigkeit d. Werkstoffes)

Stanje: delavnici obnovljeno (rabljeno), Deckel FP1 AKTIV (3-axis Aktiv) Machine no. 2102-5745 Year of manufacture: approx. 1988 Travels: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Kjdpfx Aoxpwfgebbowt Features: - Aktiv digital readout for 3 axes (HEIDENHAIN TNC 113) - Infinitely variable feed in X, Y, and Z axes - Quill traverse at vertical milling head: 60 mm - Vertical milling head is swiveling and extendable horizontally by 100 mm - Coolant system (coolant tank in machine base) - Documentation - Central lubrication Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically tested. Upon request, videos of the geometry can be provided. Backlash Y-axis: 0.15 mm Backlash X-axis: 0.3 mm Backlash Z-axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Deviation parallelism Y-axis: 0.002 mm (measuring length 150 mm) Deviation parallelism X-axis: 0.002 mm (measuring length 300 mm) The following parts have been renewed: - Central lubrication system checked - Heidenhain digital display overhauled - Set of scrapers installed - LEDs in Aktiv display replaced - Oil change - Vertical milling head re-bedded - Oil sight glass replaced Net price ex works, loaded from stock

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Dear Sir or Madam, We are pleased to offer a Deckel FP1 3-axis universal milling machine with retrofitted safety devices. This newer model features, among other things, central lubrication, an electric coolant pump, and a brake motor. Thanks to the Harting connector, the control cabinet can be quickly disconnected from the machine. The safety components are also connected to the control cabinet using this connector type, ensuring ease of handling is fully maintained. All retrofitted safety devices, which we offer for every machine type, are covered by a 12-month warranty! *The electronic spindle guard is adjustable in multiple axes and is designed to prevent access to the working spindle and protect against flying chips, coolant, etc.* *The electronic spindle safety cover prevents intervention in the rotating spindle stub and tool clamping.* Delivery time: on request Year of manufacture: 1989-1992 Machine no.: 2102-xxxx Table: fixed angle table Travel distances: X300mm / Y160mm / Z340mm Quill stroke: 60mm Kwodpfx Ajx Rvlqsbbjt Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: stepless 5–500 mm/min Rapid traverse: 1200 mm/min Features and accessories include: 3-axis digital readout with Heidenhain active control, coolant system, central lubrication, machine feet, technical documentation, electronic spindle guard, electronic spindle safety cover Our service promise to you: - We are a certified master company in mechanical engineering - All machines are thoroughly inspected - All lubricants and worn parts are replaced as a precaution - Upon request, we will fully or partially overhaul your chosen machine - Upon request, you can order additional accessories such as tools, etc. - Upon request, we can install further accessories such as safety devices - We are happy to handle shipping and/or installation for you

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with New 3-Axis FPS Aktiv Digital Readout (Heidenhain) | General Overhaul by FPS 2015 | Like-New Condition Technical Data: • Year of manufacture: 1980 | Machine No. 2201-5045 • Fixed angle table • Spindle speed: 25 - 2,500 rpm • Infinitely variable feed rate on all 3 axes Kwedpfx Abju Dm E Hebjt • Rapid traverse on all 3 axes • Motor power: 2.0 / 4.0 kW • Spindle brake • Travel (X/Y/Z): 500 / 300 / 400 mm • Vertical milling head movable on spindle head by 200 mm • Extendable vertical and horizontal quill – SK40 • Drawbar system M16 • Weight: approx. 1,500 kg Equipment and Accessories: • 3-axis Aktiv Digital Readout (Heidenhain, latest version) • Coolant system • Central lubrication system About the Machine: Offered is a Deckel FP3 universal milling machine in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has seen little use since then. The machine has minimal backlash and all spindles move smoothly. This newer FP3 model features infinitely variable feed rate on all three axes, as well as rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With the Heidenhain position control, you can enter target dimensions which the machine automatically travels to. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power at our location. The machine is available immediately.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 360 mm, For sale is a Deckel FP1 milling machine with 3-axis active control. The machine is fully operational and is inspected, cleaned, and stored in our incoming goods area. Technical data: • Digital display • 3-axis active digital readout by HEIDENHAIN • Travel (X axis): 300 mm • Travel (Y axis): 160 mm • Travel (Z axis): 340 mm • Tool holder: SK 40 • Milling head type: Vertical milling head • Speed range: 40 – 2000 rpm • Number of speed steps: 16 • X-axis feed: 290 mm • Y-axis feed: 150 mm • Z-axis feed: 330 mm • Weight: 650 kg Kedpfx Absr H E Uiobewt • Dimensions: 1200 x 1100 x 1800 mm Accessories: - Active function on X, Y, and Z axes - Coolant system The offer refers to the machine without tooling; tooling may be negotiated separately. On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT. Viewing possible by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1990, Univerzalni rezkalni stroj Znamka: DECKEL Model: FP 1 Aktiv Letnik: 1990 - preizkušen v delavnici Serijska številka: 2102-5866 Tip rezkalne glave: 2171 Številka rezkalne glave: 4613 Geometrijski prevzem s preizkusnim protokolom Pribor: Kedpfsx It Rxex Abbswt - 3-osni aktivni digitalni prikazovalnik HEIDENHAIN TNC 113 z aktivno funkcijo v X-, Y- in Z-osi - Univerzalna miza 590 x 250 mm (T-utori: 12 mm) - Vertikalna rezkalna glava SK 40 z vijačnim navojem S 20 x 2 - Brez hladilne naprave možnost naknadne vgradnje - Električna centralna mazalna naprava - Navodila za uporabo Rabljeno kot vidno, brez garancije Stroj ustreza tehničnemu stanju časa izdelave.

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 3.868 h, velikost sprednje pnevmatike: 540/65R24, velikost zadnje pnevmatike: 600/65R38, AUTOPOWR / IVT - 40 KM/H / AUTOTRAC READY / GEN 4 COMMANDCENTER / AUTOTRAC / JDLINK CAPABLE / PREMIUM SEAT / HYDRAULIC PUMP - 114 L/MIN / 3 ELECTRONIC SCV 450 SERIES CONTROL VALVES / MFWD FA- TLS WITHOUT BRAKES / 2-POSITION STEEL FRONT RIMS / FRONT Ksdpfxjulaxho Abbjwt

Stanje: dober (rabljeno), Leto izdelave: 1989, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, fixed table, SK 40 M16 spindle taper. Good, operational condition. Can be demonstrated under power by arrangement. Ksdpfx Aotp Nyfsbbowt

Stanje: dober (rabljeno), Leto izdelave: 1980, Deckel FP1 Aktiv milling machine with 3-axis Heidenhain digital readout, tilting table. SK 40 spindle taper. Good operational condition, can be demonstrated under power by prior arrangement. Kwsdpfxswg S I To Abbjt

Stanje: rabljeno, Leto izdelave: 1989, Universal tool milling machine Brand: DECKEL Model: FP 1 Aktiv Year of manufacture: 1989 – workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 Geometric acceptance with inspection protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function on X, Y, and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating manual Kwsdpfx Ajr En Dyjbbet Used, sold as seen, without warranty The technical condition of the machine corresponds to the standard of its year of manufacture.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Dear Ladies and Gentlemen, We are offering for sale a partially overhauled Deckel FP1 featuring a 3-axis Heidenhain TNC113 active control system, renowned for its ease of operation. This newer model, manufactured in 1989, is equipped with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone thorough partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. Delivery time: on request Machine no.: 2102-xxxx Table: fixed angle table or rotary-tilt/swivel table Travel paths: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Kwodpopy Eldjfx Abbet Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless, 5–500 mm/min Rapid traverse: 1,200 mm/min Equipment and accessories: 3-axis Heidenhain digital readout TNC113 with active control, stepless feed adjustment on all three axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service commitment to you: - We are a certified master workshop specialized in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul your selected machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional equipment such as safety devices, etc., directly - We are happy to handle shipping and/or installation for you