Navpični obdelovalni center

DECKEL MAHO DMC 104 V

Stanje: dober (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Technical Details X-axis travel: 1040 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Control: Heidenhain iTNC 530 Table size: 1250 x 600 mm Table load capacity: 600 kg Bdjdoxwuu Ijpfx Afqek Tool holder: SK 40 Spindle speeds: 1 - 8000 rpm Spindle torque (S1/S6): 140/200 Nm Feed rate range: 40,000 mm/min Rapid traverse X and Z axes: 70 m/min Rapid traverse Y axis: 40 m/min Spindle motor (100/40% duty cycle): 13/19 kW Total power requirement: 39 kVA Machine weight approx.: 8.9 t Additional information Power-on hours: 70,278 Spindle hours: 23,335 Please refer to the attached geometry inspection report with measurement of tool clamping force. Equipment: - CNC contouring control Heidenhain iTNC 530 - Electronic handwheel Heidenhain HR 410 - Motor spindle with increased torque - Direct measuring system in Y and Z axes - Preparation for probe system - 30-position tool changer, tool diameter 100/140 mm, length 300 mm, weight 7 kg - ROTOCLEAR - Production package 2 - Through-spindle coolant supply 20 bar - Coolant system with paper band filter - Blowing air cooling device, selectable via M function, through spindle center - Chip conveyor - Bed flushing - Linear drive in X-axis - Operating mode 4 program check with extended manual intervention - Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Stanje: dober (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 600 mm, pomik po osi Z: 700 mm, - Milling head/spindle overhauled in 2022 for €28,000 - Heidenhain iTNC530 CNC control - NC swiveling milling head: B-axis as full NC axis A-axis horizontal/vertical - NC rotary table (C-axis) - 72-position tool changer - Chip conveyor - Electronic handwheel - Coolant system (internal coolant supply 20 bar) Technical details: X-axis travel (longitudinal): 1200 mm Y-axis travel (cross): 600 mm Z-axis travel (vertical): 700 mm C-axis rotary table: 360° B-axis: ±90° Rotary table size: 800 mm Spindle taper: SK40 Spindle speed range: 0–6300 rpm Bdsdjrz I Hbjpfx Afqek Number of tool places in ATC: 72 Spindle drive power 100/40% duty cycle: 17/25 kW Machine weight approx.: 9000 kg Technical data, accessories, and machine description are not binding.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, PROIZVAJALEC: DECKEL MAHO DRŽAVA POREKLA: Nemčija TIP STROJA: DMC 104 V LINEAR LETO IZDELAVE: 2008 KRMILJE: HEIDENHAIN TNC 530 NOSILEC ORODJA: SK40 POTEK X-OSI: 1040 mm Bjdpfxjxfckme Afqedk POTEK Y-OSI: 600 mm POTEK Z-OSI: 500 mm HITROST VRETENA: 12.000 vrt/min MAKS. OBREMENITEV MIZE: 800 kg VELIKOST MIZE: 1250 x 600 mm ŠTEVILO ORODIJ V MAGAZINU: 30 kos DOVOD HLADILNE TEKOČINE: Da VELIKOST STROJA: D 3,6 x V 2,8 x Š 2,4 m SKUPNA TEŽA (pribl.): 8.000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, obratovalne ure: 38.040 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.040 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, največja hitrost vrtenja: 12.000 obr/min, število mest v zalogovniku orodij: 30, TEHNIČNE PODROBNOSTI CNC krmilnik: Heidenhain iTNC530 X-os: 1.040 mm Y-os: 600 mm Z-os: 500 mm Linearni pogon: na osi X Delovna miza Dimenzije: 1.250 mm x 600 mm Maks. teža obdelovanca: 800 kg Vreteno Delovne ure vretena: 38.040 h Hitrost vrtenja vretena: 12.000 min⁻¹ Orodni sistem Tip stožca: SK-40 Kapaciteta orodnega magazina: 30 Premer orodja: 100 mm Maks. premer orodja z vmesnimi prostori: 140 mm Bdedsxal Rxepfx Afqjk Maks. dolžina orodja: 300 mm Maks. teža orodja: 7 kg PODROBNOSTI STROJA Dolžina: 3.750 mm Širina: 2.340 mm Višina: 3.164 mm Teža: 8.900 kg OPREMA - Neposreden merilni sistem - Blum lasersko merjenje orodja, merjenje dolžine in premera orodja - Transporter za ostružke - Izpiranje postelje - Elektronski ročni upravljalnik

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Machining Centre - Vertical / Manufacturer: DECKEL MAHO / Model: DMC 63V / Year of Manufacture: 1999 The machine can be inspected under power and cutting, by appointment. Well-maintained, very good condition, fully functional. Bedpfx Afsv Nxbyeqjdk Spindle replacement: 18.03.2022 Spindle hours (as of 13.03.2025): 51,206 h The machine is equipped with a Lehmann A-axis and counter bearing (as new). TECHNICAL DATA: Working area: - X-axis: 630 mm - Y-axis: 500 mm - Z-axis: 500 mm Feed drives: - Feed force X, Y, Z (100% duty cycle): 6,000 N - Feed rate: 0 - 30,000 mm/min - Rapid traverse X, Y, Z: 30 m/min - Ball screw diameter/pitch (X, Y, Z): 40/20 mm Positioning accuracy: - Pmax in X, Y, Z axis according to VDI/DGQ 3441: 0.015/0.010 mm (indirect/direct measuring system) Measuring system: - Input increment: 0.001 mm Work spindle: - Drive power (40/100% duty cycle): 13/9 kW - Torque (40/100% duty cycle): 83/57 Nm - Speed range: 1 - 10,000 rpm - Tool holder DIN 69 871-A: SK40 - Tool clamping force: 12,000 N Tool magazine / changer: - Tool change system: Pick-up - Number of magazine positions: 24 positions - Max. tool diameter with free adjacent positions: 80/140 mm - Max. tool length: 300 mm - Max. tool weight: 7 kg - Chip-to-chip time: 6.5 sec - Magazine rotation speed: 47 rpm - Max. load capacity of tool magazine (24 x 3 kg): 72 kg Machine table: - Clamping area with T-slots DIN 650-14: 800 x 500 mm - Table load (setup weight): 500 kg - Loading height: 850 mm - Max. workpiece height (with max. tool length): 240 mm EQUIPMENT: - CNC control: Siemens 810D powerline - Lehmann A-axis and counter bearing (as new) - Direct measuring system - ICS, 15 bar - Coolant system (emulsion) - Electronic handwheel - Chip conveyor - Documentation - CE marking No guarantee for completeness and accuracy of the technical data and equipment. - Subject to prior sale -

Stanje: rabljeno, Deckel Maho DMC 104V linear Bjdpfjw Rtd Nox Afqodk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, DECKEL MAHO DMC 104 V SIEMENS 810 D Technical Specifications: X-axis travel: 1040 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Spindle speed: 12,000 rpm Spindle taper: SK 40 Tool magazine: 30 positions Clamping area: 1250 x 600 mm Max. table load: 800 kg Internal coolant supply: 40 bar Bdodpfewm Aq Ejx Afqok Equipment: chip conveyor, spindle chiller, ICS (internal coolant supply), tool measurement, documentation

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Double-spindle CNC lathe with 2 spindles, 3 turrets, and 3 Y-axes Each turret with 15 stations, BMT 44 Driven tools 2x C-axis 3x Y-axis Control: Fanuc 32i-TB Bar capacity: 65 mm Left spindle: 15/11 kW, Hainbuch Spanntop mini Axzug size 65 Right spindle: 11/7.5 kW, Kitagawa three-jaw chuck Finished part gripper Conveyor belt Bar feeder interface Coolant system with separate 200 l tank Cooling unit High-pressure at turret 1-3 via M-function 15 bar / 40 l/min 2x Brinkmann pumps Renishaw tool measurement for all turrets Tool monitoring for spindle and driven tools Spindle flushing through sub spindle (IKZ), Deublin rotary union Hinged belt conveyor Bedsvxu Eaopfx Afqsdk Transformer Immediately available

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 9.442 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 29110004034, potovalna razdalja osi X: 1.040 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, največja hitrost vretena: 12.000 obr/min, število mest v zalogovniku orodij: 30, TECHNICAL DETAILS Control system: Siemens 810D Powerline Table surface: 1,250 x 600 mm X-axis travel: 1,040 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Spindle & Tool Interface Tool holder: SK 40 Bdodpfxjwa Tmwj Afqok Spindle speed: 1 – 12,000 rpm Spindle drive: 13 kW / 19 kW (100% / 40% duty cycle) Tool changer: 30 positions MACHINE DETAILS Spindle hours: 9,442 h Operating time: 32,189 h EQUIPMENT - Linear drive on the X-axis for higher precision movements - Bed flush for cleaning the work area - Spiral chip conveyor for efficient chip removal - Direct position measurement system for precise positioning - Z-axis temperature compensation via temperature sensor with active cooling unit - External air blast via two pipes for chip removal

Stanje: rabljeno, Leto izdelave: 2008, potovalna razdalja osi X: 650 mm, pomik osi Y: 650 mm, pomik po osi Z: 680 mm, največja hitrost vretena: 24.000 obr/min, Lot no. 5.3-745 1 used horizontal machining center Heckert HEC 400D, year of manufacture 2008 CNC control Sinumerik 840D NC rotary table, B-axis Tool magazine for 80 tools Pallet changer device, 2 pallets 400 mm x 400 mm Through-spindle coolant supply (IKZ) Chip conveyor Coolant system Technical data: X-axis travel (longitudinal): 650 mm Y-axis travel (vertical): 650 mm Z-axis travel (cross): 680 mm B-axis: 360° Bdedpfx Ajrairwsfqjk Spindle taper: HSK 63A Spindle speed range: 24,000 rpm Tool stations in changer: 80 Machine weight approx.: 13,000 kg Technical data, accessories and machine description are non-binding.