Avtomatski stroj za zavezovanje trakov

Cyklop CX 85

Leto izdelave: 2008, Stanje: dober (rabljeno),

Leto izdelave: 2006, Stanje: rabljeno, Cross Stacker Gaemmerler KL 540 with integrated Interlocking Device VM 500 The KL 540 cross stacker operates with the proven LiftPack technology. The KL 540 is used for package heights up to 300 mm. Condition: cleaned and fully functional Technical Data: Kdodpfjh Nrh Usx Abrow Cycle time: ≥ 1.5 sec (depending on product) ≥ 1.2 sec with servo pusher (depending on product) Number of pages: 4 – 96 (heatset / gravure printing) Formats: A: 105 – 330 mm (105 – 310 mm with longitudinal pusher) B: 140 – 500 mm D: max. 560 mm Layer height: max. 200 mm Stack height: max. 300 mm Weight: approx. 1,500 kg Interlocking Device Gaemmerler VM500 Cycle time: (approx. 6.7 sec) per package with a package height of 300 mm and an interlocking time of 2 sec. The cycle time per package increases if the interlocking time is extended or the package height is reduced. The cycle time is also significantly influenced by the discharge speed of the cross stacker and thus by the product (surface, format). Formats: Width: 140 to 500 mm (5.5" to 19.7") Length: 105 to 330 mm (4.13" to 13") Stack height: 55 to 400 mm (2.16" to 15.7") Infeed height: 890 mm (35") Discharge height: 890 mm (35") Connection rating: 16A (2KW, 380/480 Volt, 3 phase, neutral) Air requirement: 1000 standard l/min, 6 bar; oil-free, dry air Weight: approx. 500 kg

Stanje: skoraj kot novo (rabljeno), Double-shaft multirip saw A. COSTA PUMA 2/50 350/160 Kodpeqy E Rlefx Abrsdw – Italian manufacture TECHNICAL SPECIFICATIONS: cutting width: 350 mm cutting height: 160 mm main motors: 37 and 45 kW feed motor: 3 kW adjustable lower shaft width max. blade diameter: 280 mm spindle diameter: 2 x 60 mm sleeve diameter: 2 x 80 mm feed chain width: 350 mm total power: 85 kW two feed speeds: 15 and 22 m/min centralized lubrication minimum workpiece length: 600 mm electric height adjustment electrical shaft height adjustment six upper pressure rollers mechanical roller hold-downs four anti-kickback pawls cast iron frame extraction port diameter: 2 x 220 mm spindle speed: 4500 RPM machine dimensions (L/W/H): 250 / 235 / 210 cm weight: ~ 5000 kg

Stanje: rabljeno, Leto izdelave: 1999, številka stroja/vozila: 99T318, PERTICI UNIVER 330IP DOUBLE MITRE SAW – CE STANDARDS – USED - Cutting length: 3300 mm - Power: 4.5 kW - Blade diameter: 330 mm - Double angle tilt with blade dust extraction Kjdpfx Aoqmpnasbredw - Voltage: 380V / 50Hz - Serial no.: 99T318 - Year: 1999

Stanje: novo, Leto izdelave: 2025, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, individually adjustable 1st brush: Scotch Brite Medium / Diameter 220 mm, variable speed drive 2nd brush: Scotch Brite Hard / Diameter 220 mm, variable speed drive Height adjustment: Handwheel Kodpfsi Hpk Uox Abrjdw Height display: Mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 3 kW / both with variable speed drive (infinitely adjustable) Feed motor power: 0.37 kW Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2015, obratovalne ure: 985 h, potovalna razdalja osi X: 905 mm, pomik osi Y: 705 mm, pomik po osi Z: 455 mm, teža obdelovanca (maks.): 3.000 kg, EDM314MF30 – SLM (Second-Life-Machine) Complete Overhaul Travel paths X x Y x Z: 900 x 705 x 455 mm Machine table: 1150 x 850 mm Tank size: 1200 x 900 mm Distance table/chuck: 260/710 mm Electrode weight: 50/500 kg Maximum workpiece weight: 3,000 kg Machine overall dimensions: 2210 x 3450 x 3250 mm Power supply: 400V/three-phase/50/60Hz Tank height: 750 mm Features: MF30 operator interface Movable control panel Touch screen display Lift-off speed: 15,000 mm/min (Highjump) Erosion generator: 60A Integrated chiller Cartridge filtration system Kodpfehfaizsx Abrsdw 8-position tool changer C-axis with direct measurement, resolution 0.0001° C-axis for positioning, rotary, and erosion operations C-axis: 100 rpm Automatic tank tracking Filling, filtering, and flushing pump Transport Initial commissioning Training 12-month warranty

Stanje: dober (rabljeno), Leto izdelave: 1996, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / ready for operation Operating Principle Processing of construction timber for chalet construction / log house manufacturing The beams can be processed in a single pass • Cutting to length • Horizontal and vertical milling of tenons / grooves in a single clamping • Drilling • Milling of end grooves Workpiece: • Max. cutting height: 200 mm • Max. cutting width: 250 mm Robust welded construction design. Machine (horizontal and vertical milling unit) with 4 special milling motors, equipped with hardened and ground guides for maximum machining precision. Carriage guided by dust-protected and preloaded ball bearing rollers. Working area up to 200 x 250 mm. Fully operational, with contactor control, motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for on-site chip extraction, with 2 eccentric clamps, without milling tools (rebate heads). With hydro-pneumatic horizontal and vertical feed, electrically controlled, operating together with spindle motor start-up. Rapid traverse and feed are steplessly adjustable. Fully wired and installed, including air maintenance unit. Beams with a thickness of more than 14 cm must be processed in two clamping steps. Such beams must be repositioned for re-milling to account for the excess thickness. Safety covers over moving parts with gas strut weight compensation. Machine Description / Equipped with: 1. Saw Unit: Manual feed Kdodpfxou Uh T De Abrsw Spindle adjustment with analog scale display Saw blade Ø max. / Bore Ø: 400 / 30 mm Tungsten carbide tipped with chip depth limiter (same direction of rotation) Adjustable riving knife Motor speed: min⁻¹ 2900 Power kW: 2.2 2. CM Milling Unit (Log House Unit) Hydro-pneumatic feed Spindle adjustment with digital scale display Horizontal milling unit Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter widths above 60 mm, only cutters made from aluminum alloy with indexable inserts are to be used 2 motors, hydro-pneumatic feed, each 2.2 kW Hydro-pneumatic feed Rapid traverse and feed speed steplessly adjustable 3. Drilling Unit: Manual feed Spindle adjustment with analog scale display Drill holder: Collet ER 25 Clamping Ø max.: 16 mm Drill Ø max.: 32 mm Motor: min⁻¹ 1450, 1.8 kW 4. End Milling Unit Hydro-pneumatic feed Spindle adjustment with digital scale display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor: min⁻¹ 2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Pneumatics On-site operating pressure min/max. MPa (bar): 0.7 / 1 (7 / 10) Air consumption Nm³/h: 8 Electrics Operating voltage V / Hz: 380, 50 Rated power kW: 8.8 - 15.8, depending on configuration Required on-site fuse: A 3 x 25 slow-blow Maximum simultaneous power in use: 4.4 kW Dimensions Machine width: 2400 mm Machine depth: 1600 mm Overall height (guard down): 1600 mm Overall height (guard up): 2200 mm Extraction connection Ø (floor extraction): Weight approx.: 1300 kg Incl. roller conveyor 2 x 6 m (2 x 4 m) Technical specifications subject to change!

Stanje: rabljeno, Leto izdelave: 2023, The machine is available for demonstration at our warehouse in Blomberg. Equipped with 1 HD pump (Binks Maple 8/25, up to 175 bar) and 4 Sames-Kremlin AVX Airmix spray guns. The machine features a switching valve for quick color changes and a lever for switching between up to 3 color circuits and 1 cleaning agent pump (options available). The machine is built in explosion-proof (Ex) configuration. - Manufacturer: Ka-Ma - Model: KR BM 1000 B - Year of manufacture: 2023 - Working width: 1,200 mm (optional 1,300 mm) - Single gun drive - Dry extraction - Conveyor belt transport system - Continuously adjustable feed speed: 2 - 8 m/min - With paint recirculation system - PLC and LS-controlled guns - Installed color circuits: 3 - Installed spray guns: 4 Kedsumvnhjpfx Abredw - Spray guns: Sames/Kremlin AVX, Airmix - Airmix spray system - Height-adjustable spray guns: 150 mm - Pump manufacturer: Binks Maple 8/25, up to max. 175 bar - Includes supply air filter ceiling - Suitable for water-based and solvent-based paints - Exhaust air capacity: 12,000 m³/h - Length: 3,243 mm - Width: 3,482 mm - Height: 2,450 mm - Voltage / Frequency: 400 V / 50 Hz - Color: RAL 7035, light grey - Weight: 3,100 kg _____ Optionally, we can also provide an offer for installation and commissioning of the unit, as well as staff training. Upon request, we also offer regular maintenance and servicing of the machine. For further information, please do not hesitate to contact us!

Leto izdelave: 1998, Stanje: dober (rabljeno), I am selling a dowel drilling machine with dowel inserter KOCH Sprint-PTP Year of manufacture: 1998 Number of dowel spindles: 1 Number of insertion heads: 1 Programming CNC-controlled Z-axis Working width: 1200 mm Maximum working height: 36 mm Kjdpfx Ajd Exwgsbredw Available for immediate sale

Stanje: novo, Leto izdelave: 2024, Magnetic separator for chip transport line Tube magnet with 4 magnetic plates (permanent magnet) Kedpecqvhwefx Abrodw Hinged door for easy removal of metal parts Tube diameter: 180 mm Location: In stock at 54634 Bitburg - immediately available -